Search based software engineering: Trends, techniques and applications

© ACM, 2012. This is the author's version of the work. It is posted here by permission of ACM for your personal use. Not for redistribution. The definitive version is available from the link below.In the past five years there has been a dramatic increase in work on Search-Based Software Engineering (SBSE), an approach to Software Engineering (SE) in which Search-Based Optimization (SBO) algorithms are used to address problems in SE. SBSE has been applied to problems throughout the SE lifecycle, from requirements and project planning to maintenance and reengineering. The approach is attractive because it offers a suite of adaptive automated and semiautomated solutions in situations typified by large complex problem spaces with multiple competing and conflicting objectives. This article provides a review and classification of literature on SBSE. The work identifies research trends and relationships between the techniques applied and the applications to which they have been applied and highlights gaps in the literature and avenues for further research.EPSRC and E

A COUPLING AND COHESION METRICS SUITE FOR

The increasing need for software quality measurements has led to extensive research into software metrics and the development of software metric tools. To maintain high quality software, developers need to strive for a low-coupled and highly cohesive design. One of many properties considered when measuring coupling and cohesion is the type of relationships that made up coupling and cohesion. What these specific relationships are is widely understood and accepted by researchers and practitioners. However, different researchers base their metrics on a different subset of these relationships. Studies have shown that because of the inclusion of multiple subsets of relationships in one measure of coupling and cohesion metrics, the measures tend to correlate among each other. Validation of these metrics against maintainability index of a Java program suggested that there is high multicollinearity among coupling and cohesion metrics. This research introduces an approach of implementing coupling and cohesion metrics. Every possible relationship is considered and, for each, addressed the issue of whether or not it has significant effect on maintainability index prediction. Validation of orthogonality of the selected metrics is assessed by means of principal component analysis. The investigation suggested that some of the metrics are independent set of metrics, while some are measuring similar dimension

Quality-Aware Learning to Prioritize Test Cases

Software applications evolve at a rapid rate because of continuous functionality extensions, changes in requirements, optimization of code, and fixes of faults. Moreover, modern software is often composed of components engineered with different programming languages by different internal or external teams. During this evolution, it is crucial to continuously detect unintentionally injected faults and continuously release new features. Software testing aims at reducing this risk by running a certain suite of test cases regularly or at each change of the source code. However, the large number of test cases makes it infeasible to run all test cases. Automated test case prioritization and selection techniques have been studied in order to reduce the cost and improve the efficiency of testing tasks. However, the current state-of-art techniques remain limited in some aspects. First, the existing test prioritization and selection techniques often assume that faults are equally distributed across the software components, which can lead to spending most of the testing budget on components less likely to fail rather than the ones highly to contain faults. Second, the existing techniques share a scalability problem not only in terms of the size of the selected test suite but also in terms of the round-trip time between code commits and engineer feedback on test cases failures in the context of Continuous Integration (CI) development environments. Finally, it is hard to algorithmically capture the domain knowledge of the human testers which is crucial in testing and release cycles. This thesis is a new take on the old problem of reducing the cost of software testing in these regards by presenting a data-driven lightweight approach for test case prioritization and execution scheduling that is being used (i) during CI cycles for quick and resource-optimal feedback to engineers, and (ii) during release planning by capturing the testers domain knowledge and release requirements. Our approach combines software quality metrics with code churn metrics to build a regressive model that predicts the fault density of each component and a classification model to discriminate faulty from non-faulty components. Both models are used to guide the testing effort to the components likely to contain the largest number of faults. The predictive models have been validated on eight industrial automotive software applications at Daimler, showing a classification accuracy of 89% and an accuracy of 85.7% for the regression model. The thesis develops a test cases prioritization model based on features of the code change, the tests execution history and the component development history. The model reduces the cost of CI by predicting whether a particular code change should trigger the individual test suites and their corresponding test cases. In order to algorithmically capture the domain knowledge and the preferences of the tester, our approach developed a test case execution scheduling model that consumes the testers preferences in the form of a probabilistic graph and solves the optimal test budget allocation problem both online in the context of CI cycles and offline when planning a release. Finally, the thesis presents a theoretical cost model that describes when our prioritization and scheduling approach is worthwhile. The overall approach is validated on two industrial analytical applications in the area of energy management and predictive maintenance, showing that over 95% of the test failures are still reported back to the engineers while only 43% of the total available test cases are being executed

Quality-Aware Learning to Prioritize Test Cases

Software applications evolve at a rapid rate because of continuous functionality extensions, changes in requirements, optimization of code, and fixes of faults. Moreover, modern software is often composed of components engineered with different programming languages by different internal or external teams. During this evolution, it is crucial to continuously detect unintentionally injected faults and continuously release new features. Software testing aims at reducing this risk by running a certain suite of test cases regularly or at each change of the source code. However, the large number of test cases makes it infeasible to run all test cases. Automated test case prioritization and selection techniques have been studied in order to reduce the cost and improve the efficiency of testing tasks. However, the current state-of-art techniques remain limited in some aspects. First, the existing test prioritization and selection techniques often assume that faults are equally distributed across the software components, which can lead to spending most of the testing budget on components less likely to fail rather than the ones highly to contain faults. Second, the existing techniques share a scalability problem not only in terms of the size of the selected test suite but also in terms of the round-trip time between code commits and engineer feedback on test cases failures in the context of Continuous Integration (CI) development environments. Finally, it is hard to algorithmically capture the domain knowledge of the human testers which is crucial in testing and release cycles. This thesis is a new take on the old problem of reducing the cost of software testing in these regards by presenting a data-driven lightweight approach for test case prioritization and execution scheduling that is being used (i) during CI cycles for quick and resource-optimal feedback to engineers, and (ii) during release planning by capturing the testers domain knowledge and release requirements. Our approach combines software quality metrics with code churn metrics to build a regressive model that predicts the fault density of each component and a classification model to discriminate faulty from non-faulty components. Both models are used to guide the testing effort to the components likely to contain the largest number of faults. The predictive models have been validated on eight industrial automotive software applications at Daimler, showing a classification accuracy of 89% and an accuracy of 85.7% for the regression model. The thesis develops a test cases prioritization model based on features of the code change, the tests execution history and the component development history. The model reduces the cost of CI by predicting whether a particular code change should trigger the individual test suites and their corresponding test cases. In order to algorithmically capture the domain knowledge and the preferences of the tester, our approach developed a test case execution scheduling model that consumes the testers preferences in the form of a probabilistic graph and solves the optimal test budget allocation problem both online in the context of CI cycles and offline when planning a release. Finally, the thesis presents a theoretical cost model that describes when our prioritization and scheduling approach is worthwhile. The overall approach is validated on two industrial analytical applications in the area of energy management and predictive maintenance, showing that over 95% of the test failures are still reported back to the engineers while only 43% of the total available test cases are being executed

Software Engineering Laboratory Series: Collected Software Engineering Papers

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document

Empirically-Grounded Construction of Bug Prediction and Detection Tools

There is an increasing demand on high-quality software as software bugs have an economic impact not only on software projects, but also on national economies in general. Software quality is achieved via the main quality assurance activities of testing and code reviewing. However, these activities are expensive, thus they need to be carried out efficiently. Auxiliary software quality tools such as bug detection and bug prediction tools help developers focus their testing and reviewing activities on the parts of software that more likely contain bugs. However, these tools are far from adoption as mainstream development tools. Previous research points to their inability to adapt to the peculiarities of projects and their high rate of false positives as the main obstacles of their adoption. We propose empirically-grounded analysis to improve the adaptability and efficiency of bug detection and prediction tools. For a bug detector to be efficient, it needs to detect bugs that are conspicuous, frequent, and specific to a software project. We empirically show that the null-related bugs fulfill these criteria and are worth building detectors for. We analyze the null dereferencing problem and find that its root cause lies in methods that return null. We propose an empirical solution to this problem that depends on the wisdom of the crowd. For each API method, we extract the nullability measure that expresses how often the return value of this method is checked against null in the ecosystem of the API. We use nullability to annotate API methods with nullness annotation and warn developers about missing and excessive null checks. For a bug predictor to be efficient, it needs to be optimized as both a machine learning model and a software quality tool. We empirically show how feature selection and hyperparameter optimizations improve prediction accuracy. Then we optimize bug prediction to locate the maximum number of bugs in the minimum amount of code by finding the most cost-effective combination of bug prediction configurations, i.e., dependent variables, machine learning model, and response variable. We show that using both source code and change metrics as dependent variables, applying feature selection on them, then using an optimized Random Forest to predict the number of bugs results in the most cost-effective bug predictor. Throughout this thesis, we show how empirically-grounded analysis helps us achieve efficient bug prediction and detection tools and adapt them to the characteristics of each software project

Automatic Software Repair: a Bibliography

This article presents a survey on automatic software repair. Automatic software repair consists of automatically finding a solution to software bugs without human intervention. This article considers all kinds of repairs. First, it discusses behavioral repair where test suites, contracts, models, and crashing inputs are taken as oracle. Second, it discusses state repair, also known as runtime repair or runtime recovery, with techniques such as checkpoint and restart, reconfiguration, and invariant restoration. The uniqueness of this article is that it spans the research communities that contribute to this body of knowledge: software engineering, dependability, operating systems, programming languages, and security. It provides a novel and structured overview of the diversity of bug oracles and repair operators used in the literature

04511 Abstracts Collection -- Architecting Systems with Trustworthy Components

From 12.12.04 to 17.12.04, the Dagstuhl Seminar 04511 ``Architecting Systems with Trustworthy Components\u27\u27 was held in the International Conference and Research Center (IBFI), Schloss Dagstuhl. During the seminar, several participants presented their current research, and ongoing work and open problems were discussed. Abstracts of the presentations given during the seminar as well as abstracts of seminar results and ideas are put together in this paper. The first section describes the seminar topics and goals in general. Links to extended abstracts or full papers are provided, if available