Proposal and analysis of integrated PTN architecture in the mobile backhaul to improve the QoS of HetNets

Los rápidos avances de las tecnologías de dispositivos móviles han implicado que la red de acceso debe evolucionar y desarrollar nuevas estrategias para satisfacer las necesidades de los usuarios. La red heterogénea (HetNet) permite una estrategia de implementación flexible y ofrece soluciones económicamente viables para mejorar la escalabilidad de red y cobertura en interiores. Este tema emergente ha captado la atención de la comunidad científica y la industria debido a la importancia de estas redes para satisfacer la demanda de servicios de datos. Para proporcionar esta demanda, deben satisfacerse diferentes parámetros de calidad de servicio (QoS). En este trabajo, presentamos un estudio sobre los últimos avances y los temas de investigación sobre movilidad en conjunción con protocolos de conmutación de etiquetas multiprotocolo (MPLS) de paquetes basado en redes de transporte (PTN) para proporcionar QoS en redes heterogéneas inalámbricas. Se presentan diversos protocolos de gestión móvil y su interacción con la red de retorno móvil yred básica por paquetes. Una nueva arquitectura denominada Proxy integrado Mobile MPLS-TP (MIP-TP) se expone también a reducir los costos y mejorar la señalización de la QoS en HetNets con altas tasas de movilidad.The rapid progress made in mobile device technologies has implied that the access network must evolute and develop new strategies to satisfy the requirements of the users. Heterogeneous network (HetNet) allows for a flexible deployment strategy and offers economically viable solutions to improve network scalability and indoor coverage. This emerging topic has caught the attention of the research community and the industry because of the importance of these networks to satisfy the demand of data services. To provide this demand, different parameters of quality of service (QoS) must be satisfied. In this paper, we present a study on recent advances and open research issues on Mobility Protocols in conjunction with Multi-Protocol Label Switching (MPLS)-based packet transport networks (PTN) to provide QoS in wireless heterogeneous networks. Various mobile management protocols and their interaction with the mobile backhaul and packet core network are briefly introduced. A new architecture called Integrated Proxy Mobile MPLS-TP (IPM-TP) is also outlined to reduce the signalling cost and improve the QoS in HetNets with high rates of mobility.Unión Europea. Fondos Europeos de Desarrollo Regional (FEDER). Proyecto SOE4/P3/E804peerReviewe

Rural internet connectivity: a development in Dwesa-Cwebe, Eastern Cape, South Africa

This thesis presents aspects of Internet connectivity in rural South Africa. The work looks at government initiatives being undertaken to connect rural communities to up-to-date information networks. Various projects that seek to connect rural areas of South Africa, as well as other remote areas around the world, are discussed. These projects present many novel ideas that have been successfully used to link rural communities in remote areas with the information age. In particular, wired and wireless access technologies that can be implemented to connect remote communities to the Internet are discussed. A field test utilizing GPRS, VSAT and WiMAX was implemented in Dwesa-Cwebe, Eastern Cape Province, South Africa. VSAT proved to offer better Internet connectivity in terms of throughput and latency. WiMAX was then successfully implemented to relay the signal over the remote area of Dwesa-Cwebe, thus effectively providing Internet connectivity to an area with limited cell phone coverage and no telephone lines

A Detailed Characterization of 60 GHz Wi-Fi (IEEE 802.11ad)

The emergence of wireless local area network (WLAN) standards and the global system of mobile communication (GSM) in the early 1990s incited tremendous growth in the demand for wireless connectivity. Iterative technological enhancements to cellular and WLAN improved wireless capacity and created a breadth of new mobile applications. The continued increase in display resolutions and image quality combined with streaming displacing satellite/cable has created unprecedented demands on wireless infrastructure. Data-caps on cellular networks deter over consumption and increasingly shift the growing burden to Wi-Fi networks. The traditional 2.4/5 GHz Wi-Fi bands have become overloaded and the increasing number of wireless devices in the home, public, and workplace create difficult challenges to deliver quality service to large numbers of client stations. In dense urban areas, the wireless medium is subjected to increased interference due to overlapping networks and other devices communicating in the same frequency bands. Improvements to conventional Wi-Fi are approaching their theoretical limits and higher order enhancements require idealized conditions which are seldom attainable in practice. In an effort to supplant to scaling capacity requirements a very high frequency WLAN amendment has been proposed (IEEE 802.11ad). IEEE 802.11ad, also referred to as Wireless Gigabit (WiGig), operates in the globally unlicensed 60 GHz band and offers channel bandwidths nearly 100x as wide as 802.11n. The higher bandwidth facilitates multi-Gbps throughput even with the use of lower complexity modulation coding schemes (MCS). IEEE 802.11ad relies heavily on rate adaptation and high beamforming gain to mitigate interference and fading as signals in the 60 GHz band suffer from higher atmospheric ab- sorption and free space path loss (FSPL). Due to the unique nature of 60 GHz wireless there have been numerous research efforts. Many studies have been directed at simulation and modeling of the 60 GHz channel. However modeling the channel is difficult as real- world environments are highly dynamic with varying link quality and conditions which cannot be accurately predicted by conventional techniques. Some research is focused on medium access control (MAC) enhancements to improve overall capacity by coordinating concurrent links or reducing communication overhead for example. Lastly, there has been a limited amount of real world testing of 802.11ad due to lack of availability of commercial platforms and measurement instrumentation. Some researchers tested early generation devices in certain use cases such as in vehicles for media streaming, in data centers to augment the wired network, or in basic indoor and outdoor environments. This research contains two main components. In the first study, analytical models are applied to estimate line of sight (LOS) 802.11ad performance for realistic antenna param- eters. The second part contains a comprehensive evaluation of performance and reliability of early generation 802.11ad hardware. This characterization emphasizes environmen- tal performance (e.g. conference room, cubical farm, open office), multiple-client testing (multiclient), multiple network interference (spatial re-use), and stability in the presence of station mobility, physical obstructions, and antenna misalignment. In order to evaluate 802.11ad, early generation platforms from technology vendors were used in extensive test suites. The hardware tested included docks for wireless personal area networking (WPAN) applications, client laptop stations, and reference design access points (APs). Finally, a customized proof-of-concept (PoC) platform was engineered which allowed finer control over front end antenna configuration parameters such as: topology, placement and orienta- tion. The PoC also served as a suitable means to identify practical limitations and system design engineering challenges associated with supporting directional multi-Gbps (DMG) communication in the 60 GHz band

Resource Allocation, Scheduling and Feedback Reduction in Multiple Input Multiple Output (MIMO) Orthogonal Frequency-Division Multiplexing (OFDM) Systems

The number of wireless systems, services, and users are constantly increasing and therefore the bandwidth requirements have become higher. One of the most robust modulations is Orthogonal Frequency-Division Multiplexing (OFDM). It has been considered as an attractive solution for future broadband wireless communications. This dissertation investigates bit and power allocation, joint resource allocation, user scheduling, and limited feedback problem in multi-user OFDM systems. The following dissertation contributes to improved OFDM systems in the following manner. (1) A low complexity sub-carrier, power, and bit allocation algorithm is proposed. This algorithm has lower computational complexity and results in performance that is comparable to that of the existing algorithms. (2) Variations of the proportional fair scheduling scheme are proposed and analyzed. The proposed scheme improves system throughput and delay time, and achieves higher throughput without sacrificing fairness which makes it a better scheme in terms of efficiency and fairness. (3) A DCT feedback compression algorithm based on sorting is proposed. This algorithm uses sorting to increase the correlation between feedback channel quality information of frequency selective channels. The feedback overhead of system is successfully reduced

Resource optimization, spectrum allocation and fault tolerance planning in broadband wireless networks

In current (4G) and future (5G) broadband cellular networks, new cell coverage planning ideas, network architectures proposals, novel physical resources allocation optimization techniques, and dynamic spectrum allocation optimization frame works provide good opportunities for mobile service providers (MSPs) to improve their return on investments (ROI), and for mobile equipments manufacturers to increase their profit and market share. Despite the attractive opportunities that network architecture, cell planning and resources allocation optimization offers, there are many challenges and difficulties that are facing MSPs when planning and operating networks to cope with the tremendous increase in mobile applications and to satisfy different users requirements. Physical resources allocation, spectrum allocation optimization, network architecture enhancement, and fault tolerance cell planning are major issues in broadband cellular networks. The work accomplished in this thesis aims at enhancing the network performance by optimizing the planning and operations of the network. Different optimization techniques are used throughout this thesis to help increase the spectral and energy efficiency in 4G and 5G networks. The objectives of this study are four objectives, first to propose a physical resources allocation utility based frame work using a novel utility function that can jointly optimize the maximum normalized spectral efficiency (NSE) and power consumed locally in each cell in order to increase the mobile service providers ROI. The ROI is enhanced by increasing the profits through maximizing the network spectral efficiency and decreasing the operational costs by minimizing the power consumption in the network. The second objective is to determine the optimal down-link frequency partition configuration that can efficiently allocate the spectrum resources to different network frequency partitions in order to globally achieve the same joint optimization objective by addressing the DFPCs dynamic behavior according to the network topology, load conditions, and users distribution. The third objective is to propose a new network architecture that consists of a data collection system that aid as a traffic data repository and a decision support system (DSS) introduced as a new self optimization module within the self organized networks (SON) framework to automate the optimization of the dynamic spectrum allocation. The last objective is to perform a network planning that aims at placing the optimal number of relay stations that aid in achieving network full coverage and minimum rate requirements with a fault tolerance functionality to avoid network failures and using the self organized frame work to perform the self healing by managing the backup solutions needed in response to the network failures. In order to achieve the previously mentioned objectives a detailed study to the state of the art in network planning using relay stations, physical resource allocation, dynamic spectrum allocation, network architecture and SON frame work is conducted. Different methodologies such as integer linear programming, stochastic programming and non-parametric estimation analysis are presented to propose a novel physical resources and dynamic spectrum allocation schemes. A plan-do-control-act model is also proposed within the DSS in the new suggested network architecture for continuous improvement of spectrum allocation. A non-linear to linear formulation conversion using an expanded space state is utilized to perform an in-band fault tolerance network planning that consider network interference between relay stations and base stations and avoid network failures. Simulations and results are conducted to validate the proposed methodologies and to compare it against state of the art work

A cross-layer cooperation strategy for cellular networks.

PhDCooperation is seen as a means to improve the signal in OFDMA wireless networks by overcoming the inter-cell interference. Such co-operation can be deployed in both the physical layer and the MAC layer. In this thesis, a cross-layer cooperation strategy is considered. Firstly, in the physical layer, a cooperative coding scheme with private information sharing is proposed based on dirty paper coding; this is analyzed in a scenario with two transmitters and two receivers. To implement the cooperation, a rate limited link is deployed at the transmitters’ side in order to share the information. A new achievable rate region is established in both strong interference regime and weak interference regime. Secondly, in the MAC layer, a graph-based dynamic coordinated clustering scheme is proposed. An interference weighted graph is constructed to assist dynamic coordinated clustering for inter-cell interference mitigation and to improve the cell-edge user performance. Only 2 bits are allowed for the signalling exchange between transmitters and this reduces the overhead of the approach. The system throughput and cell-edge throughput with different user distributions are used to evaluate the performance. Thirdly, a transmit antenna selection algorithm is presented to optimize system performance with the constraint of fairness. A graph is generated by using the channel condition between the transmit antennas and Mobile Stations. Based on the graph, a heuristic algorithm is proposed to choose the transmit antenna for each user in order to improve the system performance and guarantee the user fairness. Finally, combining the cooperative coding scheme and cooperative clustering scheme, a cross-layer cooperation scheme is presented. In the physical layer, the cooperation coding scheme mitigates the interference and increases the transmission rate; in the MAC layer, the cooperative clustering scheme provides efficient cooperative transmission. Simulation results show that the proposed scheme can effectively increase both the system throughput and cell-edge throughput

Management And Security Of Multi-Cloud Applications

Single cloud management platform technology has reached maturity and is quite successful in information technology applications. Enterprises and application service providers are increasingly adopting a multi-cloud strategy to reduce the risk of cloud service provider lock-in and cloud blackouts and, at the same time, get the benefits like competitive pricing, the flexibility of resource provisioning and better points of presence. Another class of applications that are getting cloud service providers increasingly interested in is the carriers\u27 virtualized network services. However, virtualized carrier services require high levels of availability and performance and impose stringent requirements on cloud services. They necessitate the use of multi-cloud management and innovative techniques for placement and performance management. We consider two classes of distributed applications – the virtual network services and the next generation of healthcare – that would benefit immensely from deployment over multiple clouds. This thesis deals with the design and development of new processes and algorithms to enable these classes of applications. We have evolved a method for optimization of multi-cloud platforms that will pave the way for obtaining optimized placement for both classes of services. The approach that we have followed for placement itself is predictive cost optimized latency controlled virtual resource placement for both types of applications. To improve the availability of virtual network services, we have made innovative use of the machine and deep learning for developing a framework for fault detection and localization. Finally, to secure patient data flowing through the wide expanse of sensors, cloud hierarchy, virtualized network, and visualization domain, we have evolved hierarchical autoencoder models for data in motion between the IoT domain and the multi-cloud domain and within the multi-cloud hierarchy