Investigating low-bitrate, low-complexity H.264 region of interest techniques in error-prone environments

The H.264/AVC video coding standard leverages advanced compression methods to provide a significant increase in performance over previous CODECs in terms of picture quality, bitrate, and flexibility. The specification itself provides several profiles and levels that allow customization through the use of various advanced features. In addition to these features, several new video coding techniques have been developed since the standard\u27s inception. One such technique known as Region of Interest (RoI) coding has been in existence since before H.264\u27s formalization, and several means of implementing RoI coding in H.264 have been proposed. Region of Interest coding operates under the assumption that one or more regions of a sequence have higher priority than the rest of the video. One goal of RoI coding is to provide a decrease in bitrate without significant loss of perceptual quality, and this is particularly applicable to low complexity environments, if the proper implementation is used. Furthermore, RoI coding may allow for enhanced error resilience in the selected regions if desired, making RoI suitable for both low-bitrate and error-prone scenarios. The goal of this thesis project was to examine H.264 Region of Interest coding as it applies to such scenarios. A modified version of the H.264 JM Reference Software was created in which all non-Baseline profile features were removed. Six low-complexity RoI coding techniques, three targeting rate control and three targeting error resilience, were selected for implementation. Error and distortion modeling tools were created to enhance the quality of experimental data. Results were gathered by varying a range of coding parameters including frame size, target bitrate, and macroblock error rates. Methods were then examined based on their rate-distortion curves, ability to achieve target bitrates accurately, and per-region distortions where applicable

Algorithms and methods for video transcoding.

Video transcoding is the process of dynamic video adaptation. Dynamic video adaptation can be defined as the process of converting video from one format to another, changing the bit rate, frame rate or resolution of the encoded video, which is mainly necessitated by the end user requirements. H.264 has been the predominantly used video compression standard for the last 15 years. HEVC (High Efficiency Video Coding) is the latest video compression standard finalised in 2013, which is an improvement over H.264 video compression standard. HEVC performs significantly better than H.264 in terms of the Rate-Distortion performance. As H.264 has been widely used in the last decade, a large amount of video content exists in H.264 format. There is a need to convert H.264 video content to HEVC format to achieve better Rate-Distortion performance and to support legacy video formats on newer devices. However, the computational complexity of HEVC encoder is 2-10 times higher than that of H.264 encoder. This makes it necessary to develop low complexity video transcoding algorithms to transcode from H.264 to HEVC format. This research work proposes low complexity algorithms for H.264 to HEVC video transcoding. The proposed algorithms reduce the computational complexity of H.264 to HEVC video transcoding significantly, with negligible loss in Rate-Distortion performance. This work proposes three different video transcoding algorithms. The MV-based mode merge algorithm uses the block mode and MV variances to estimate the split/non-split decision as part of the HEVC block prediction process. The conditional probability-based mode mapping algorithm models HEVC blocks of sizes 16×16 and lower as a function of H.264 block modes, H.264 and HEVC Quantisation Parameters (QP). The motion-compensated MB residual-based mode mapping algorithm makes the split/non-split decision based on content-adaptive classification models. With a combination of the proposed set of algorithms, the computational complexity of the HEVC encoder is reduced by around 60%, with negligible loss in Rate-Distortion performance, outperforming existing state-of-art algorithms by 20-25% in terms of computational complexity. The proposed algorithms can be used in computation-constrained video transcoding applications, to support video format conversion in smart devices, migration of large-scale H.264 video content from host servers to HEVC, cloud computing-based transcoding applications, and also to support high quality videos over bandwidth-constrained networks

Advanced heterogeneous video transcoding

PhDVideo transcoding is an essential tool to promote inter-operability between different video communication systems. This thesis presents two novel video transcoders, both operating on bitstreams of the cur- rent H.264/AVC standard. The first transcoder converts H.264/AVC bitstreams to a Wavelet Scalable Video Codec (W-SVC), while the second targets the emerging High Efficiency Video Coding (HEVC). Scalable Video Coding (SVC) enables low complexity adaptation of compressed video, providing an efficient solution for content delivery through heterogeneous networks. The transcoder proposed here aims at exploiting the advantages offered by SVC technology when dealing with conventional coders and legacy video, efficiently reusing information found in the H.264/AVC bitstream to achieve a high rate-distortion performance at a low complexity cost. Its main features include new mode mapping algorithms that exploit the W-SVC larger macroblock sizes, and a new state-of-the-art motion vector composition algorithm that is able to tackle different coding configurations in the H.264/AVC bitstream, including IPP or IBBP with multiple reference frames. The emerging video coding standard, HEVC, is currently approaching the final stage of development prior to standardization. This thesis proposes and evaluates several transcoding algorithms for the HEVC codec. In particular, a transcoder based on a new method that is capable of complexity scalability, trading off rate-distortion performance for complexity reduction, is proposed. Furthermore, other transcoding solutions are explored, based on a novel content-based modeling approach, in which the transcoder adapts its parameters based on the contents of the sequence being encoded. Finally, the application of this research is not constrained to these transcoders, as many of the techniques developed aim to contribute to advance the research on this field, and have the potential to be incorporated in different video transcoding architectures

Video Stream Adaptation In Computer Vision Systems

Computer Vision (CV) has been deployed recently in a wide range of applications, including surveillance and automotive industries. According to a recent report, the market for CV technologies will grow to $33.3 billion by 2019. Surveillance and automotive industries share over 20% of this market. This dissertation considers the design of real-time CV systems with live video streaming, especially those over wireless and mobile networks. Such systems include video cameras/sensors and monitoring stations. The cameras should adapt their captured videos based on the events and/or available resources and time requirement. The monitoring station receives video streams from all cameras and run CV algorithms for decisions, warnings, control, and/or other actions. Real-time CV systems have constraints in power, computational, and communicational resources. Most video adaptation techniques considered the video distortion as the primary metric. In CV systems, however, the main objective is enhancing the event/object detection/recognition/tracking accuracy. The accuracy can essentially be thought of as the quality perceived by machines, as opposed to the human perceptual quality. High-Efficiency Video Coding (HEVC) is a recent encoding standard that seeks to address the limited communication bandwidth problem as a result of the popularity of High Definition (HD) videos. Unfortunately, HEVC adopts algorithms that greatly slow down the encoding process, and thus results in complications in real-time systems. This dissertation presents a method for adapting live video streams to limited and varying network bandwidth and energy resources. It analyzes and compares the rate-accuracy and rate-energy characteristics of various video streams adaptation techniques in CV systems. We model the video capturing, encoding, and transmission aspects and then provide an overall model of the power consumed by the video cameras and/or sensors. In addition to modeling the power consumption, we model the achieved bitrate of video encoding. We validate and analyze the power consumption models of each phase as well as the aggregate power consumption model through extensive experiments. The analysis includes examining individual parameters separately and examining the impacts of changing more than one parameter at a time. For HEVC, we develop an algorithm that predicts the size of the block without iterating through the exhaustive Rate Distortion Optimization (RDO) method. We demonstrate the effectiveness of the proposed algorithm in comparison with existing algorithms. The proposed algorithm achieves approximately 5 times the encoding speed of the RDO algorithm and 1.42 times the encoding speed of the fastest analyzed algorithm

Modified inter prediction H.264 video encoding for maritime surveillance

Video compression has evolved since it is first being standardized. The most popular CODEC, H.264 can compress video effectively according to the quality that is required. This is due to the motion estimation (ME) process that has impressive features like variable block sizes varying from 4×4 to 16×16 and quarter pixel motion compensation. However, the disadvantage of H.264 is that, it is very complex and impractical for hardware implementation. Many efforts have been made to produce low complexity encoding by compromising on the bitrate and decoded quality. Two notable methods are Fast Search Mode and Early Termination. In Early Termination concept, the encoder does not have to perform ME on every macroblock for every block size. If certain criteria are reached, the process could be terminated and the Mode Decision could select the best block size much faster. This project proposes on using background subtraction to maximize the Early Termination process. When recording using static camera, the background remains the same for a long period of time where most macroblocks will produce minimum residual. Thus in this thesis, the ME process for the background macroblock is terminated much earlier using the maximum 16×16 macroblock size. The accuracy of the background segmentation for maritime surveillance video case study is 88.43% and the true foreground rate is at 41.74%. The proposed encoder manages to reduce 73.5% of the encoding time and 80.5% of the encoder complexity. The bitrate of the output is also reduced, in the range of 20%, compared to the H.264 baseline encoder. The results show that the proposed method achieves the objectives of improving the compression rate and the encoding time

Beyond the pixels: learning and utilising video compression features for localisation of digital tampering.

Video compression is pervasive in digital society. With rising usage of deep convolutional neural networks (CNNs) in the fields of computer vision, video analysis and video tampering detection, it is important to investigate how patterns invisible to human eyes may be influencing modern computer vision techniques and how they can be used advantageously. This work thoroughly explores how video compression influences accuracy of CNNs and shows how optimal performance is achieved when compression levels in the training set closely match those of the test set. A novel method is then developed, using CNNs, to derive compression features directly from the pixels of video frames. It is then shown that these features can be readily used to detect inauthentic video content with good accuracy across multiple different video tampering techniques. Moreover, the ability to explain these features allows predictions to be made about their effectiveness against future tampering methods. The problem is motivated with a novel investigation into recent video manipulation methods, which shows that there is a consistent drive to produce convincing, photorealistic, manipulated or synthetic video. Humans, blind to the presence of video tampering, are also blind to the type of tampering. New detection techniques are required and, in order to compensate for human limitations, they should be broadly applicable to multiple tampering types. This thesis details the steps necessary to develop and evaluate such techniques

Complexity management of H.264/AVC video compression.

The H. 264/AVC video coding standard offers significantly improved compression efficiency and flexibility compared to previous standards. However, the high computational complexity of H. 264/AVC is a problem for codecs running on low-power hand held devices and general purpose computers. This thesis presents new techniques to reduce, control and manage the computational complexity of an H. 264/AVC codec. A new complexity reduction algorithm for H. 264/AVC is developed. This algorithm predicts "skipped" macroblocks prior to motion estimation by estimating a Lagrange ratedistortion cost function. Complexity savings are achieved by not processing the macroblocks that are predicted as "skipped". The Lagrange multiplier is adaptively modelled as a function of the quantisation parameter and video sequence statistics. Simulation results show that this algorithm achieves significant complexity savings with a negligible loss in rate-distortion performance. The complexity reduction algorithm is further developed to achieve complexity-scalable control of the encoding process. The Lagrangian cost estimation is extended to incorporate computational complexity. A target level of complexity is maintained by using a feedback algorithm to update the Lagrange multiplier associated with complexity. Results indicate that scalable complexity control of the encoding process can be achieved whilst maintaining near optimal complexity-rate-distortion performance. A complexity management framework is proposed for maximising the perceptual quality of coded video in a real-time processing-power constrained environment. A real-time frame-level control algorithm and a per-frame complexity control algorithm are combined in order to manage the encoding process such that a high frame rate is maintained without significantly losing frame quality. Subjective evaluations show that the managed complexity approach results in higher perceptual quality compared to a reference encoder that drops frames in computationally constrained situations. These novel algorithms are likely to be useful in implementing real-time H. 264/AVC standard encoders in computationally constrained environments such as low-power mobile devices and general purpose computers

Segmentation based coding of depth Information for 3D video

Increased interest in 3D artifact and the need of transmitting, broadcasting and saving the whole information that represents the 3D view, has been a hot topic in recent years. Knowing that adding the depth information to the views will increase the encoding bitrate considerably, we decided to find a new approach to encode/decode the depth information for 3D video. In this project, different approaches to encode/decode the depth information are experienced and a new method is implemented which its result is compared to the best previously developed method considering both bitrate and quality (PSNR)

Reconfigurable Architecture For H.264/avc Variable Block Size Motion Estimation Based On Motion Activity And Adaptive Search Range

Motion Estimation (ME) technique plays a key role in the video coding systems to achieve high compression ratios by removing temporal redundancies among video frames. Especially in the newest H.264/AVC video coding standard, ME engine demands large amount of computational capabilities due to its support for wide range of different block sizes for a given macroblock in order to increase accuracy in finding best matching block in the previous frames. We propose scalable architecture for H.264/AVC Variable Block Size (VBS) Motion Estimation with adaptive computing capability to support various search ranges, input video resolutions, and frame rates. Hardware architecture of the proposed ME consists of scalable Sum of Absolute Difference (SAD) arrays which can perform Full Search Block Matching Algorithm (FSBMA) for smaller 4x4 blocks. It is also shown that by predicting motion activity and adaptively adjusting the Search Range (SR) on the reconfigurable hardware platform, the computational cost of ME required for inter-frame encoding in H.264/AVC video coding standard can be reduced significantly. Dynamic Partial Reconfiguration is a unique feature of Field Programmable Gate Arrays (FPGAs) that makes best use of hardware resources and power by allowing adaptive algorithm to be implemented during run-time. We exploit this feature of FPGA to implement the proposed reconfigurable architecture of ME and maximize the architectural benefits through prediction of motion activities in the video sequences ,adaptation of SR during run-time, and fractional ME refinement. The implemented ME architecture can support real time applications at a maximum frequency of 90MHz with multiple reconfigurable regions. iv When compared to reconfiguration of complete design, partial reconfiguration process results in smaller bitstream size which allows FPGA to implement different configurations at higher speed. The proposed architecture has modular structure, regular data flow, and efficient memory organization with lower memory accesses. By increasing the number of active partial reconfigurable modules from one to four, there is a 4 fold increase in data re-use. Also, by introducing adaptive SR reduction algorithm at frame level, the computational load of ME is reduced significantly with only small degradation in PSNR (≤0.1dB)

Fast and Efficient Foveated Video Compression Schemes for H.264/AVC Platform

Some fast and efficient foveated video compression schemes for H.264/AVC platform are presented in this dissertation. The exponential growth in networking technologies and widespread use of video content based multimedia information over internet for mass communication applications like social networking, e-commerce and education have promoted the development of video coding to a great extent. Recently, foveated imaging based image or video compression schemes are in high demand, as they not only match with the perception of human visual system (HVS), but also yield higher compression ratio. The important or salient regions are compressed with higher visual quality while the non-salient regions are compressed with higher compression ratio. From amongst the foveated video compression developments during the last few years, it is observed that saliency detection based foveated schemes are the keen areas of intense research. Keeping this in mind, we propose two multi-scale saliency detection schemes. (1) Multi-scale phase spectrum based saliency detection (FTPBSD); (2) Sign-DCT multi-scale pseudo-phase spectrum based saliency detection (SDCTPBSD). In FTPBSD scheme, a saliency map is determined using phase spectrum of a given image/video with unity magnitude spectrum. On the other hand, the proposed SDCTPBSD method uses sign information of discrete cosine transform (DCT) also known as sign-DCT (SDCT). It resembles the response of receptive field neurons of HVS. A bottom-up spatio-temporal saliency map is obtained by linear weighted sum of spatial saliency map and temporal saliency map. Based on these saliency detection techniques, foveated video compression (FVC) schemes (FVC-FTPBSD and FVC-SDCTPBSD) are developed to improve the compression performance further.Moreover, the 2D-discrete cosine transform (2D-DCT) is widely used in various video coding standards for block based transformation of spatial data. However, for directional featured blocks, 2D-DCT offers sub-optimal performance and may not able to efficiently represent video data with fewer coefficients that deteriorates compression ratio. Various directional transform schemes are proposed in literature for efficiently encoding such directional featured blocks. However, it is observed that these directional transform schemes suffer from many issues like ‘mean weighting defect’, use of a large number of DCTs and a number of scanning patterns. We propose a directional transform scheme based on direction-adaptive fixed length discrete cosine transform (DAFL-DCT) for intra-, and inter-frame to achieve higher coding efficiency in case of directional featured blocks.Furthermore, the proposed DAFL-DCT has the following two encoding modes. (1) Direction-adaptive fixed length ― high efficiency (DAFL-HE) mode for higher compression performance; (2) Direction-adaptive fixed length ― low complexity (DAFL-LC) mode for low complexity with a fair compression ratio. On the other hand, motion estimation (ME) exploits temporal correlation between video frames and yields significant improvement in compression ratio while sustaining high visual quality in video coding. Block-matching motion estimation (BMME) is the most popular approach due to its simplicity and efficiency. However, the real-world video sequences may contain slow, medium and/or fast motion activities. Further, a single search pattern does not prove efficient in finding best matched block for all motion types. In addition, it is observed that most of the BMME schemes are based on uni-modal error surface. Nevertheless, real-world video sequences may exhibit a large number of local minima available within a search window and thus possess multi-modal error surface (MES). Hence, the following two uni-modal error surface based and multi-modal error surface based motion estimation schemes are developed. (1) Direction-adaptive motion estimation (DAME) scheme; (2) Pattern-based modified particle swarm optimization motion estimation (PMPSO-ME) scheme. Subsequently, various fast and efficient foveated video compression schemes are developed with combination of these schemes to improve the video coding performance further while maintaining high visual quality to salient regions. All schemes are incorporated into the H.264/AVC video coding platform. Various experiments have been carried out on H.264/AVC joint model reference software (version JM 18.6). Computing various benchmark metrics, the proposed schemes are compared with other existing competitive schemes in terms of rate-distortion curves, Bjontegaard metrics (BD-PSNR, BD-SSIM and BD-bitrate), encoding time, number of search points and subjective evaluation to derive an overall conclusion