14 research outputs found
AUGMENTED REALITY AND INTRAOPERATIVE C-ARM CONE-BEAM COMPUTED TOMOGRAPHY FOR IMAGE-GUIDED ROBOTIC SURGERY
Minimally-invasive robotic-assisted surgery is a rapidly-growing alternative to traditionally open and laparoscopic procedures; nevertheless, challenges remain. Standard of care derives surgical strategies from preoperative volumetric data (i.e., computed tomography (CT) and magnetic resonance (MR) images) that benefit from the ability of multiple modalities to delineate different anatomical boundaries. However, preoperative images may not reflect a possibly highly deformed perioperative setup or intraoperative deformation. Additionally, in current clinical practice, the correspondence of preoperative plans to the surgical scene is conducted as a mental exercise; thus, the accuracy of this practice is highly dependent on the surgeon’s experience and therefore subject to inconsistencies.
In order to address these fundamental limitations in minimally-invasive robotic surgery, this dissertation combines a high-end robotic C-arm imaging system and a modern robotic surgical platform as an integrated intraoperative image-guided system. We performed deformable registration of preoperative plans to a perioperative cone-beam computed tomography (CBCT), acquired after the patient is positioned for intervention. From the registered surgical plans, we overlaid critical information onto the primary intraoperative visual source, the robotic endoscope, by using augmented reality. Guidance afforded by this system not only uses augmented reality to fuse virtual medical information, but also provides tool localization and other dynamic intraoperative updated behavior in order to present enhanced depth feedback and information to the surgeon. These techniques in guided robotic surgery required a streamlined approach to creating intuitive and effective human-machine interferences, especially in visualization.
Our software design principles create an inherently information-driven modular architecture incorporating robotics and intraoperative imaging through augmented reality. The system's performance is evaluated using phantoms and preclinical in-vivo experiments for multiple applications, including transoral robotic surgery, robot-assisted thoracic interventions, and cocheostomy for cochlear implantation. The resulting functionality, proposed architecture, and implemented methodologies can be further generalized to other C-arm-based image guidance for additional extensions in robotic surgery
BildverarbeitungsunterstĂĽtzte Laserknochenablation am humanen Felsenbein
Für die Grenzflächenerhaltung am Innenohr als mikrochirurgische Herausforderung und wichtiger Schritt zur bestmöglichen Versorgung von Schwerhörigen mit Cochleaimplantaten wird in dieser Arbeit die bildbasierte Regelung während eines laserbasierten Knochenabtrages eingesetzt. Dabei wird der Aufbau des Systems, Bildverarbeitungsalgorithmen für die Grenzflächenerkennung, Planung, Simulation und Modellierung des mikrochirurgischen Knochenabtrages sowie die experimentelle Verifikation beschrieben
PRELIMINARY FINDINGS OF A POTENZIATED PIEZOSURGERGICAL DEVICE AT THE RABBIT SKULL
The number of available ultrasonic osteotomes has remarkably increased. In vitro and in vivo studies
have revealed differences between conventional osteotomes, such as rotating or sawing devices, and
ultrasound-supported osteotomes (Piezosurgery®) regarding the micromorphology and roughness
values of osteotomized bone surfaces.
Objective: the present study compares the micro-morphologies and roughness values of
osteotomized bone surfaces after the application of rotating and sawing devices, Piezosurgery
Medical® and Piezosurgery Medical New Generation Powerful Handpiece.
Methods: Fresh, standard-sized bony samples were taken from a rabbit skull using the following
osteotomes: rotating and sawing devices, Piezosurgery Medical® and a Piezosurgery Medical New
Generation Powerful Handpiece. The required duration of time for each osteotomy was recorded.
Micromorphologies and roughness values to characterize the bone surfaces following the different
osteotomy methods were described. The prepared surfaces were examined via light microscopy,
environmental surface electron microscopy (ESEM), transmission electron microscopy (TEM), confocal
laser scanning microscopy (CLSM) and atomic force microscopy. The selective cutting of mineralized
tissues while preserving adjacent soft tissue (dura mater and nervous tissue) was studied. Bone
necrosis of the osteotomy sites and the vitality of the osteocytes near the sectional plane were
investigated, as well as the proportion of apoptosis or cell degeneration.
Results and Conclusions: The potential positive effects on bone healing and reossification
associated with different devices were evaluated and the comparative analysis among the different
devices used was performed, in order to determine the best osteotomes to be employed during
cranio-facial surgery
Cerebrospinal Fluid
Cerebrospinal fluid is an essential, clear, and colorless liquid essential for maintaining homeostasis of the brain and neuronal functioning. Its secretion in adults ranges from 400 to 600 ml per day and it is renewed about four or five times daily. Cerebrospinal fluid is mainly reabsorbed from arachnoid granulations. Any disruption in this well-regulated system, such as overproduction, decreased absorption, or obstruction, could lead to hydrocephalus. This book contains essential knowledge about cerebrospinal fluid anatomy and physiology, pathologies related to cerebrospinal fluid, and treatment strategies for cerebrospinal fluid disorders
Image Quality, Modeling, and Design for High-Performance Cone-Beam CT of the Head
Diagnosis and treatment of neurological and otolaryngological diseases rely heavily on visualization of fine, subtle anatomical structures in the head. In particular, high-quality head imaging at the point of care mitigates patient risk associated with transport and decreases time to diagnosis for time-sensitive diseases. Cone-beam computed tomography (CBCT) systems have found widespread adoption in diagnostic and image-guided procedures. Such systems exhibit potential for adaptation as point-of-care systems due to relatively low cost, mechanical simplicity, and inherently high spatial resolution, but are generally challenged by low contrast imaging tasks (e.g., visualization of tumors or hemorrhages). This thesis details the development and design of a CBCT imaging system with performance sufficient for high-quality imaging of the head and suitable to deployment at the point of care.
The performance of a commercially available head-and-neck CBCT scanner was assessed to determine the potential of such systems for high-quality head imaging. Results indicated low-contrast visualization was challenged by high detector noise and scatter. Photon counting x-ray detectors (PCDs) were identified as a potential technology that could improve the low-contrast visualization, and an imaging performance model was developed to quantify their imaging performance. The model revealed important implications for energy resolution, noise, and spatial resolution as a function of energy threshold and charge sharing rejection.
A new CBCT system dedicated to detection of low-contrast contrast intracranial hemorrhage was designed with guidance from an imaging chain model to optimize the system configuration (geometry, detector, x-ray source, etc.). The results indicated flat panel detectors (FPDs) were favorable due to a large field of view, but benefited from detector readout gain adjustments. Dual-gain detector readout was compared with use of bowtie filter in high-gain readout mode to investigate potential improvements to noise performance in FPDs. Finally, technical assessment of the prototype CBCT head scanner (with design based on guidance from the image quality model) indicated performance suitable for translation to clinical studies in the neurosciences critical care unit