343 research outputs found

    Modeling Adaptive Middleware and Its Applications to Military Tactical Datalinks

    Get PDF
    Open systems solutions and techniques have become the de facto standard for achieving interoperability between disparate, large-scale, legacy software systems. A key technology among open systems solutions and techniques is middleware. Middleware, in general, is used to isolate applications from dependencies introduced by hardware, operating systems, and other low-level aspects of system architectures. While middleware approaches are or will be integrated into operational military systems, many open questions exist about the appropriate areas to applying middleware. Adaptive middleware is middleware that provides an application with a run-time adaptation strategy, based upon system-level interfaces and properties. Adaptive middleware is an example of an active applied research area. Adaptive middleware is being developed and applied to meet the ever-increasing challenges set forth by the next generation of mission-critical distributed real-time and embedded (DRE) systems. The driving force behind many next-generation DRE systems is the establishment of QoS requirements typically associated with workloads that vary dynamically. The Weapon System Open Architecture (WSOA), an adaptive middleware platform developed by Boeing, is modeled as a part of this research to determine the scalability of the architecture. The WSOA adaptive middleware was previously flight-tested with one tactical node, and the test results represent the performance baseline the architecture. The WSOA adaptive middleware is modeled with 1, 2, 4, 8 and 16 tactical nodes. The results of the modeling and simulation is that the WSOA adaptive middleware can achieve the performance baseline achieved during the original flight-test, in the cases of 1, 2, and 4 tactical nodes. In addition, the results of the modeling and simulation also demonstrate that the WSOA adaptive middleware cannot achiev

    Distributed urban traffic applications based on CORBA event services

    Get PDF
    Intelligent transportation systems (ITS) in urban environments are based today on modern embedded systems with enhanced digital connectivity and higher processing capabilities, supporting distributed applications working in a cooperative manner. This paper provides an overview about modern cooperative ITS equipments and presents a distributed application to be used in an urban data network. As a case example, an application based on an embedded CORBA-compliant middleware layer and several computer vision equipments is presented. Results prove the feasibility of distributed applications for building intelligent urban environments

    Flexible programmable networking: A reflective, component-based approach

    Get PDF
    The need for programmability and adaptability in networking systems is becoming increasingly important. More specifically, the challenge is in the ability to add services rapidly, and be able to deploy, configure and reconfigure them as easily as possible. Such demand is creating a considerable shift in the way networks are expected to operate in the future. This is the main aim of programmable networking research community, and in our project we are investigating a component-based approach to the structuring of programmable networking software. Our intention is to apply the notion of components, component frameworks and reflection ubiquitously, thus accommodating all the different elements that comprise a programmable networking system

    A Generic Network and System Management Framework

    Get PDF
    Networks and distributed systems have formed the basis of an ongoing communications revolution that has led to the genesis of a wide variety of services. The constantly increasing size and complexity of these systems does not come without problems. In some organisations, the deployment of Information Technology has reached a state where the benefits from downsizing and rightsizing by adding new services are undermined by the effort required to keep the system running. Management of networks and distributed systems in general has a straightforward goal: to provide a productive environment in which work can be performed effectively. The work required for management should be a small fraction of the total effort. Most IT systems are still managed in an ad hoc style without any carefully elaborated plan. In such an environment the success of management decisions depends totally on the qualification and knowledge of the administrator. The thesis provides an analysis of the state of the art in the area of Network and System Management and identifies the key requirements that must be addressed for the provisioning of Integrated Management Services. These include the integration of the different management related aspects (i.e. integration of heterogeneous Network, System and Service Management). The thesis then proposes a new framework, INSMware, for the provision of Management Services. It provides a fundamental basis for the realisation of a new approach to Network and System Management. It is argued that Management Systems can be derived from a set of pre-fabricated and reusable Building Blocks that break up the required functionality into a number of separate entities rather than being developed from scratch. It proposes a high-level logical model in order to accommodate the range of requirements and environments applicable to Integrated Network and System Management that can be used as a reference model. A development methodology is introduced that reflects principles of the proposed approach, and provides guidelines to structure the analysis, design and implementation phases of a management system. The INSMware approach can further be combined with the componentware paradigm for the implementation of the management system. Based on these principles, a prototype for the management of SNMP systems has been implemented using industry standard middleware technologies. It is argued that development of a management system based on Componentware principles can offer a number of benefits. INSMware Components may be re-used and system solutions will become more modular and thereby easier to construct and maintain

    Towards Context-Aware Real-Time Information Dissemination

    Get PDF
    Real-time information dissemination is essential for the success of key applications such as transportation management and battlefield monitoring. In these applications, relevant information should be disseminated to interested users in a timely fashion. However, it is challenging to support timely information dissemination due to the limited and even time-varying network bandwidth. Thus, a naive approach disseminating every data with no consideration of the context that describes where and when the data is acquired and how it can satisfy users may only provide poor performance and user perceived quality of service (QoS). To address the problem, we design a novel context-aware protocol to disseminate real-time data in a cost-effective manner by considering the spatio-temporal semantics associated with information. More specifically, we define (1) context attributes, (2) develop how to analyze the utility of a specific data item based on the attributes, (3) and adjust the utility based on a cost-benefit analysis for costeffective real-time information dissemination especially in the context of visual surveillance

    Patterns for Providing Real-Time Guarantees in DOC Middleware - Doctoral Dissertation, May 2002

    Get PDF
    The advent of open and widely adopted standards such as Common Object Request Broker Architecture (CORBA) [47] has simplified and standardized the development of distributed applications. For applications with real-time constraints, including avionics, manufacturing, and defense systems, these standards are evolving to include Quality-of-Service (QoS) specifications. Operating systems such as Real-time Linux [60] have responded with interfaces and algorithms to guarantee real-time response; similarly, languages such as Real-time Java [59] include mechanisms for specifying real-time properties for threads. However, the middleware upon which large distributed applications are based has not yet addressed end-to-end guarantees of QoS specifications. Unless this challenge can be met, developers must resort to ad hoc solutions that may not scale or migrate well among different platforms. This thesis provides two contributions to the study of real-time Distributed Object Computing (DOC) middleware. First, it identifies potential bottlenecks and problems with respect to guaranteeing real-time performance in contemporary middleware. Experimental results illustrate how these problems lead to incorrect real-time behavior in contemporary middleware platforms. Second, this thesis presents designs and techniques for providing real-time QoS guarantees in DOC middleware in the context of TAO [6], an open-source and widely adopted implementation of real-time CORBA. Architectural solutions presented here are coupled with empirical evaluations of end-to-end real-time behavior. Analysis of the problems, forces, solutions, and consequences are presented in terms of patterns and frame-works, so that solutions obtained for TAO can be appropriately applied to other real-time systems

    Distributed control of reconfigurable mobile network agents for resource coordination

    Get PDF
    Includes abstract.Includes bibliographical references.Considering the tremendous growth of internet applications and network resource federation proposed towards future open access network (FOAN), the need to analyze the robustness of the classical signalling mechanisms across multiple network operators cannot be over-emphasized. It is envisaged, there will be additional challenges in meeting the bandwidth requirements and network management...The first objective of this project is to describe the networking environment based on the support for heterogeneity of network components..

    Composing Systemic Aspects into Component-Oriented DOC Middleware

    Get PDF
    The advent and maturation of component-based middleware frameworks have sim-plified the development of large-scale distributed applications by separating system devel-opment and configuration concerns into different aspects that can be specified and com-posed at various stages of the application development lifecycle. Conventional component middleware technologies, such as J2EE [73] and .NET [34], were designed to meet the quality of service (QoS) requirements of enterprise applications, which focus largely on scalability and reliability. Therefore, conventional component middleware specifications and implementations are not well suited for distributed real-time and embedded (DRE) ap-plications with more stringent QoS requirements, such as low latency/jitter, timeliness, and online fault recovery. In the DRE system development community, a new generation of enhanced commercial off-the-shelf (COTS) middleware, such as Real-time CORBA 1.0 (RT-CORBA)[39], is increasingly gaining acceptance as (1) the cost and time required to develop and verify DRE applications precludes developers from implementing complex DRE applications from scratch and (2) implementations of standard COTS middleware specifications mature and encompass key QoS properties needed by DRE systems. However, although COTS middleware standardizes mechanisms to configure and control underlying OS support for an application’s QoS requirements, it does not yet provide sufficient abstractions to separate QoS policy configurations such as real-time performance requirements, from application functionality. Developers are therefore forced to configure QoS policies in an ad hoc way, and the code to configure these policies is often scattered throughout and tangled with other parts of a DRE system. As a result, it is hard for developers to configure, validate, modify, and evolve complex DRE systems consistently. It is therefore necessary to create a new generation of QoS-enabled component middleware that provides more comprehensive support for addressing QoS-related concerns modularly, so that they can be introduced and configured as separate systemic aspects. By analyzing and identifying the limitations of applying conventional middleware technologies for DRE applications, this dissertation presents a new design and its associated techniques for enhancing conventional component-oriented middleware to provide programmability of DRE relevant real-time QoS concerns. This design is realized in an implementation of the standard CORBA Component Model (CCM) [38], called the Component-Integrated ACE ORB (CIAO). This dissertation also presents both architectural analysis and empirical results that demonstrate the effectiveness of this approach. This dissertation provides three contributions to the state of the art in composing systemic behaviors into component middleware frameworks. First, it illustrates how component middleware can simplify development and evolution of DRE applications while ensuring stringent QoS requirements by composing systemic QoS aspects. Second, it contributes to the design and implementation of QoS-enabled CCM by analyzing and documenting how systemic behaviors can be composed into component middleware. Finally, it presents empirical and analytical results to demonstrate the effectiveness and the advantage of composing systemic behaviors in component middleware. The work in this dissertation has a broader impact beyond the CCM in which it was developed, as it can be applied to other component-base middleware technologies which wish to support DRE applications

    The MIDdleware Assurance Substrate: Enabling Strong Real-Time Guarantees in Open Systems With OpenFlow

    Get PDF
    Middleware designed for use in Distributed Real-Time and Embedded (DRE) systems enable cost and development time reductions by providing simple communications abstractions and hiding operating system-level networking API details from developers. While current middleware technologies can hide many low-level details, designers must provide a static configuration for the system’s underlying network in order to achieve required performance characteristics. This has not been a problem for many types of DRE systems where the configuration of the system is relatively fixed from the factory (e.g., aircraft or naval vessels). However for truly open systems (i.e., systems where end users can add or subtract components at runtime) the standard static network configuration approach cannot guarantee that required performance will be met because network resource demands are not fully known a priori. Open systems with stringent performance requirements need middleware that can dynamically manage the underlying network configuration automatically in response to changing demands. Fortunately, recent trends in networking have resulted in a wide variety of networking equipment that expose a standardized low-level interface to their configuration via the OpenFlow protocol. In this paper we discuss how OpenFlow can be leveraged by DRE middleware to automatically provide performance guarantees. In order to make the discussion concrete, we describe the architecture of our prototype middleware MIDAS as well as the details of one example network resource management strategy. We demonstrate the feasibility of our approach via performance assesment of a simple DRE application using our MIDAS and commerically available OpenFlow hardware
    corecore