Evaluating the Differences of Gridding Techniques for Digital Elevation Models Generation and Their Influence on the Modeling of Stony Debris Flows Routing: A Case Study From Rovina di Cancia Basin (North-Eastern Italian Alps)

Debris \ufb02ows are among the most hazardous phenomena in mountain areas. To cope with debris \ufb02ow hazard, it is common to delineate the risk-prone areas through routing models. The most important input to debris \ufb02ow routing models are the topographic data, usually in the form of Digital Elevation Models (DEMs). The quality of DEMs depends on the accuracy, density, and spatial distribution of the sampled points; on the characteristics of the surface; and on the applied gridding methodology. Therefore, the choice of the interpolation method affects the realistic representation of the channel and fan morphology, and thus potentially the debris \ufb02ow routing modeling outcomes. In this paper, we initially investigate the performance of common interpolation methods (i.e., linear triangulation, natural neighbor, nearest neighbor, Inverse Distance to a Power, ANUDEM, Radial Basis Functions, and ordinary kriging) in building DEMs with the complex topography of a debris \ufb02ow channel located in the Venetian Dolomites (North-eastern Italian Alps), by using small footprint full- waveform Light Detection And Ranging (LiDAR) data. The investigation is carried out through a combination of statistical analysis of vertical accuracy, algorithm robustness, and spatial clustering of vertical errors, and multi-criteria shape reliability assessment. After that, we examine the in\ufb02uence of the tested interpolation algorithms on the performance of a Geographic Information System (GIS)-based cell model for simulating stony debris \ufb02ows routing. In detail, we investigate both the correlation between the DEMs heights uncertainty resulting from the gridding procedure and that on the corresponding simulated erosion/deposition depths, both the effect of interpolation algorithms on simulated areas, erosion and deposition volumes, solid-liquid discharges, and channel morphology after the event. The comparison among the tested interpolation methods highlights that the ANUDEM and ordinary kriging algorithms are not suitable for building DEMs with complex topography. Conversely, the linear triangulation, the natural neighbor algorithm, and the thin-plate spline plus tension and completely regularized spline functions ensure the best trade-off among accuracy and shape reliability. Anyway, the evaluation of the effects of gridding techniques on debris \ufb02ow routing modeling reveals that the choice of the interpolation algorithm does not signi\ufb01cantly affect the model outcomes

A new simplified vector-based model to support solar energy planning at urban scale

Evaluation of solar potential is a necessary step for integrating solar technologies in buildings in order to properly assess the benefits of harvesting solar energy and draw well-informed decisions in various design phases. Solar energy planning at urban scale requires large-scale solar analysis to support various decision-making contexts, such as making urban solar targets, prioritizing urban zones or buildings for solar integration, and optimizing solar technologies tailored for targeting buildings. Existing tools have the following major limitations to support such decision-making situations. (1) Current advanced simulation models based on ray trace and ray interception techniques are not effectively scalable to evaluate solar potential at urban scale due to the expensive modelling process and computational cost. (2) Simple and statistical models developed for large-scale analysis are not suitable to accurately predict solar irradiance on individual surfaces with proper consideration of urban shading and reflection. This dissertation addresses the need for developing scalable, efficient analysis methods to support the solar energy planning process. This dissertation has developed a simplified vector-based model that effectively predicts the solar potential of urban areas on the basis of consideration of the urban context. The proposed model is based on vector-based methods without the use of ray trace and ray interception techniques, and consists of new methods that suitably account for the non-uniform solar radiation of the sky, obstruction by urban surfaces, and reflection by urban surfaces in urban areas. The proposed model establishes three new methods to simplify the calculation in the context of urban applications: (1) a two-segment discretisation model, (2) an edge-angle detection obstruction model, and (3) a unified view-angle-based reflection model. This dissertation demonstrates the usability of the new model in supporting decision-making in the solar energy planning process. It addresses the following two hypotheses to examine the usability of the new model: (1) Simplified, vector-based model, tailored to urban applications, predict accurate solar radiation on urban surfaces to effectively support urban-scale analysis and (2) solar analysis with full representation of urban surroundings is necessary in the calculation of urban shading and solar reflection to correctly support distributed PV planning. For the first hypothesis, the performance of the method is compared against the advanced daylight simulation program RADIANCE and measurements obtained from controlled experiments. The first comparison demonstrates the new method provides flexible setting options for different resolution and prediction accuracy requirements and generates reasonably accurate predictions. The second comparison further confirms the prediction accuracy against the measurements for the horizontal and vertical surfaces under different shading and reflection conditions. The comparison with the ray interception approach demonstrates the computational efficiency of the proposed obstruction model for solar analysis that substantially reduces calculation iterations for detecting sky and building obstructions. For the second hypothesis, predictions and decisions derived by the developed method are compared against those by a lower fidelity models to investigate the importance of modelling urban shading and reflection with full representation of urban surroundings in three decision making contexts of urban-scale distributed PV planning process. Additionally, the second hypothesis is furthered examined and highlighted by investigating the effect of an additional dynamic PV model on decision-makings in comparison with the effect of the proposed high-fidelity solar radiation model for urban shading and solar reflection. The new model is demonstrated to enable cost-efficient solar potential analysis based on urban contexts for supporting solar energy planning at urban scale.CSC Cambridge Scholarshi

A survey of new technology for cockpit application to 1990's transport aircraft simulators

Two problems were investigated: inter-equipment data transfer, both on board the aircraft and between air and ground; and crew equipment communication via the cockpit displays and controls. Inter-equipment data transfer is discussed in terms of data bus and data link requirements. Crew equipment communication is discussed regarding the availability of CRT display systems for use in research simulators to represent flat panel displays of the future, and of software controllable touch panels

Analysis of Spatial Uncertainty in LiDAR-derived Building Data and Uncertainty Propagation in Modeling of Urban Atmospheric Dispersion

Results of environmental models (EMs) are often used to assist decision making. However, EM outcomes vary significantly with different input data, model parameters and model assumptions. Therefore, informed decision making requires an in-depth understanding of how the changes in input data, model parameters and model assumptions influence the model outputs. While EMs are now accustomed to geo-spatial data, the influences of spatial uncertainty are often overlooked. This research examines the influence of spatial uncertainty throughout the three stages of general environment modeling: 1) examine the uncertainty in geo-spatial data as representation of the environment, 2) examine the uncertainty in the linkage between EMs and Geographic Information System (GIS) and, 3) examine and compare the influence of spatial uncertainty with the uncertainty of model parameters. LiDAR data and urban atmospheric dispersion model (UADM) are used as a use case, to demonstrate the methods and benefits of examining the influence of spatial uncertainty toward EMs

Operationalization of Remote Sensing Solutions for Sustainable Forest Management

The great potential of remote sensing technologies for operational use in sustainable forest management is addressed in this book, which is the reprint of papers published in the Remote Sensing Special Issue “Operationalization of Remote Sensing Solutions for Sustainable Forest Management”. The studies come from three continents and cover multiple remote sensing systems (including terrestrial mobile laser scanning, unmanned aerial vehicles, airborne laser scanning, and satellite data acquisition) and a diversity of data processing algorithms, with a focus on machine learning approaches. The focus of the studies ranges from identification and characterization of individual trees to deriving national- or even continental-level forest attributes and maps. There are studies carefully describing exercises on the case study level, and there are also studies introducing new methodologies for transdisciplinary remote sensing applications. Even though most of the authors look forward to continuing their research, nearly all studies introduced are ready for operational use or have already been implemented in practical forestry

Spatial snow water equivalent estimation for mountainous areas using wireless-sensor networks and remote-sensing products

We developed an approach to estimate snow water equivalent (SWE) through interpolation of spatially representative point measurements using a k-nearest neighbors (k-NN) algorithm and historical spatial SWE data. It accurately reproduced measured SWE, using different data sources for training and evaluation. In the central-Sierra American River basin, we used a k-NN algorithm to interpolate data from continuous snow-depth measurements in 10 sensor clusters by fusing them with 14 years of daily 500-m resolution SWE-reconstruction maps. Accurate SWE estimation over the melt season shows the potential for providing daily, near real-time distributed snowmelt estimates. Further south, in the Merced-Tuolumne basins, we evaluated the potential of k-NN approach to improve real-time SWE estimates. Lacking dense ground-measurement networks, we simulated k-NN interpolation of sensor data using selected pixels of a bi-weekly Lidar-derived snow water equivalent product. k-NN extrapolations underestimate the Lidar-derived SWE, with a maximum bias of −10 cm at elevations below 3000 m and +15 cm above 3000 m. This bias was reduced by using a Gaussian-process regression model to spatially distribute residuals. Using as few as 10 scenes of Lidar-derived SWE from 2014 as training data in the k-NN to estimate the 2016 spatial SWE, both RMSEs and MAEs were reduced from around 20–25 cm to 10–15 cm comparing to using SWE reconstructions as training data. We found that the spatial accuracy of the historical data is more important for learning the spatial distribution of SWE than the number of historical scenes available. Blending continuous spatially representative ground-based sensors with a historical library of SWE reconstructions over the same basin can provide real-time spatial SWE maps that accurately represents Lidar-measured snow depth; and the estimates can be improved by using historical Lidar scans instead of SWE reconstructions

Development and evaluation of a digital tool for virtual reconstruction of historic Islamic geometric patterns

For the purpose of cultural heritage preservation, the task of recording and reconstructing visually complicated architectural geometrical patterns is facing many practical challenges. Existing traditional technologies rely heavily on the subjective nature of our perceptual power in understanding its complexity and depicting its color differences. This study explores one possible solution, through utilizing digital techniques for reconstructing detailed historical Islamic geometric patterns. Its main hypothesis is that digital techniques offer many advantages over the human eye in terms of recognizing subtle differences in light and color. The objective of the study is to design, test and evaluate an automatic visual tool for identifying deteriorated or incomplete archaeological Islamic geometrical patterns captured in digital images, and then restoring them digitally, for the purpose of producing accurate 2D reconstructed metric models. An experimental approach is used to develop, test and evaluate the specialized software. The goal of the experiment is to analyze the output reconstructed patterns for the purpose of evaluating the digital tool in respect to reliability and structural accuracy, from the point of view of the researcher in the context of historic preservation. The research encapsulates two approaches within its methodology; Qualitative approach is evident in the process of program design, algorithm selection, and evaluation. Quantitative approach is manifested through using mathematical knowledge of pattern generation to interpret available data and to simulate the rest based on it. The reconstruction process involves induction, deduction and analogy. The proposed method was proven to be successful in capturing the accurate structural geometry of the deteriorated straight-lines patterns generated based on the octagon-square basic grid. This research also concluded that it is possible to apply the same conceptual method to reconstruct all two-dimensional Islamic geometric patterns. Moreover, the same methodology can be applied to reconstruct many other pattern systems. The conceptual framework proposed by this study can serve as a platform for developing professional softwares related to historic documentation. Future research should be directed more towards developing artificial intelligence and pattern recognition techniques that have the ability to suplement human power in accomplishing difficult tasks

Optical remote sensing for biomass estimation in the tropics: the case study of Uganda

This study investigates the capabilities and limitations of freely available optical satellite data at medium resolution to estimate aboveground biomass density of vegetation at national scales in the tropics, and compares this approach with existing methodologies to understand and quantify the sources of variability in the estimations. Uganda was chosen as a case-study because it presents a reliable national biomass reference dataset. As a result of this thesis, aboveground woody biomass for the year circa-2000 was mapped at national scale in Uganda at 30-m spatial resolution on the basis of Landsat ETM+ images, a national land cover dataset and field data using an object-oriented approach. A regression tree-based model (Random Forest) produced good results (cross-validated R² 0.81, RMSE 13 Mg/ha) when trained with a sufficient number of field plots representative of the vegetation variability. This study demonstrated that in certain contexts Landsat data can effectively spatialize field biomass measurements and produce accurate and detailed estimates of biomass distribution at national scale. This approach tended to provide conservative biomass estimates and its limitations were mainly related to the saturation of the optical signal at high biomass density and to the cloud cover. When compared with the Uganda national biomass dataset, the map produced in this study presented higher agreement than other five regional/global biomass maps. The comparative analysis showed strong disagreement between the products, with estimates of total biomass of Uganda ranging from 343 to 2201 Tg and different spatial distribution patterns. Maps based on biome-average biomass values, such as the Intergovernmental Panel on Climate Change default values, and global land cover datasets strongly overestimated biomass stocks, while maps based on satellite data provided conservative estimates. The comparison of the maps predictions with field data confirmed the above findings