187 research outputs found
The QUIET Instrument
The Q/U Imaging ExperimenT (QUIET) is designed to measure polarization in the
Cosmic Microwave Background, targeting the imprint of inflationary
gravitational waves at large angular scales (~ 1 degree). Between 2008 October
and 2010 December, two independent receiver arrays were deployed sequentially
on a 1.4 m side-fed Dragonian telescope. The polarimeters which form the focal
planes use a highly compact design based on High Electron Mobility Transistors
(HEMTs) that provides simultaneous measurements of the Stokes parameters Q, U,
and I in a single module. The 17-element Q-band polarimeter array, with a
central frequency of 43.1 GHz, has the best sensitivity (69 uK sqrt(s)) and the
lowest instrumental systematic errors ever achieved in this band, contributing
to the tensor-to-scalar ratio at r < 0.1. The 84-element W-band polarimeter
array has a sensitivity of 87 uK sqrt(s) at a central frequency of 94.5 GHz. It
has the lowest systematic errors to date, contributing at r < 0.01. The two
arrays together cover multipoles in the range l= 25-975. These are the largest
HEMT-based arrays deployed to date. This article describes the design,
calibration, performance of, and sources of systematic error for the
instrument
Optimization of robotic assembly of printed circuit board by using evolutionary algorithm
This research work describes the development and evaluation of a custom application exploring the use of Artificial Immune System algorithms (AIS) to solve a component
placement sequencing problem for printed circuit board (PCB) assembly. In the assembly of PCB’s, the component placement process is often the bottleneck and the equipment to complete component placement is often the largest capital investment
Composite right/left handed antennas for wireless lan applications
The term ‘metamaterial’ has become a buzzword in electromagnetics over the past decade. In recent years, advancement in this new scientific area has given birth to numerous discoveries and inventions based on the exotic properties exhibited by these materials. Some of the exotic properties like negative permittivity, negative permeability, and infinite propagation at a particular non-zero resonant frequency are shown by these artificial materials especially called as Composite Right Left Handed structures. Metamaterials gain these properties from their structural configuration rather than from their material constitution. The electromagnetic characteristics of metamaterials can be exploited to meet the ever increasing demand for lighter, compact, size reduced, multiband antennas. One of the most exciting applications of these CRLH transmission lines (TL) is the Zeroth Order Resonant Antennas. CRLH TL metamaterials when open or short ended produce standing waves and thus behave as resonant antennas. Miniaturization of antennas is possible through these structures as the resonant frequency is independent of the parameters of the antenna aperture. Due to their infinite wavelength propagation property; reduced size, quarter wavelength antennas can be designed
Micro/Nano Manufacturing
Micro manufacturing involves dealing with the fabrication of structures in the size range of 0.1 to 1000 µm. The scope of nano manufacturing extends the size range of manufactured features to even smaller length scales—below 100 nm. A strict borderline between micro and nano manufacturing can hardly be drawn, such that both domains are treated as complementary and mutually beneficial within a closely interconnected scientific community. Both micro and nano manufacturing can be considered as important enablers for high-end products. This Special Issue of Applied Sciences is dedicated to recent advances in research and development within the field of micro and nano manufacturing. The included papers report recent findings and advances in manufacturing technologies for producing products with micro and nano scale features and structures as well as applications underpinned by the advances in these technologies
Dynamically reconfigurable bio-inspired hardware
During the last several years, reconfigurable computing devices have experienced an impressive development in their resource availability, speed, and configurability. Currently, commercial FPGAs offer the possibility of self-reconfiguring by partially modifying their configuration bitstream, providing high architectural flexibility, while guaranteeing high performance. These configurability features have received special interest from computer architects: one can find several reconfigurable coprocessor architectures for cryptographic algorithms, image processing, automotive applications, and different general purpose functions. On the other hand we have bio-inspired hardware, a large research field taking inspiration from living beings in order to design hardware systems, which includes diverse topics: evolvable hardware, neural hardware, cellular automata, and fuzzy hardware, among others. Living beings are well known for their high adaptability to environmental changes, featuring very flexible adaptations at several levels. Bio-inspired hardware systems require such flexibility to be provided by the hardware platform on which the system is implemented. In general, bio-inspired hardware has been implemented on both custom and commercial hardware platforms. These custom platforms are specifically designed for supporting bio-inspired hardware systems, typically featuring special cellular architectures and enhanced reconfigurability capabilities; an example is their partial and dynamic reconfigurability. These aspects are very well appreciated for providing the performance and the high architectural flexibility required by bio-inspired systems. However, the availability and the very high costs of such custom devices make them only accessible to a very few research groups. Even though some commercial FPGAs provide enhanced reconfigurability features such as partial and dynamic reconfiguration, their utilization is still in its early stages and they are not well supported by FPGA vendors, thus making their use difficult to include in existing bio-inspired systems. In this thesis, I present a set of architectures, techniques, and methodologies for benefiting from the configurability advantages of current commercial FPGAs in the design of bio-inspired hardware systems. Among the presented architectures there are neural networks, spiking neuron models, fuzzy systems, cellular automata and random boolean networks. For these architectures, I propose several adaptation techniques for parametric and topological adaptation, such as hebbian learning, evolutionary and co-evolutionary algorithms, and particle swarm optimization. Finally, as case study I consider the implementation of bio-inspired hardware systems in two platforms: YaMoR (Yet another Modular Robot) and ROPES (Reconfigurable Object for Pervasive Systems); the development of both platforms having been co-supervised in the framework of this thesis
Recommended from our members
RF-MEMS switches for reconfigurable antennas
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Reconfigurable antennas are attractive for many military and commercial applications where it is required to have a single antenna that can be dynamically reconfigured to transmit or receive on multiple frequency bands and patterns. RF-MEMS is a promising technology that has the potential to revolutionize RF and microwave system implementation for next generation telecommunication applications. Despite the efforts of top industrial and academic labs, commercialization of RFMEMS switches has lagged expectations. These problems are connected with switch design (high actuation voltage, low restoring force, low power handling), packaging (contamination layers) and actuation control (high impact force, wear, fatique). This Thesis focuses on the design and control of a novel ohmic RF-MEMS switch specified for reconfigurable antennas applications. This new switch design focuses on the failure mechanisms restriction, the simplicity in fabrication, the power handling and consumption, as well as controllability. Finally, significant attention has been paid in the switch’s electromagnetic characteristics. Efficient switch control implies increased reliability. Towards this target three novel
control modes are presented. 1) Optimization of a tailored pulse under Taguchi’s
statistical method, which produces promising results but is also sensitive to fabrication tolerances. 2) Quantification of resistive damping control mode, which produces better results only during the pull-down phase of the switch while it is possible to be implemented successfully in very stiff devices. 3) The “Hybrid” control mode, which includes both aforementioned techniques, offering outstanding switching control, as well as immunity to fabrication tolerances, allowing an ensemble of switches rendering an antenna reconfigurable, to be used.
Another issue that has been addressed throughout this work is the design and
optimization of a reconfigurable, in pattern and frequency, three element Yagi-Uda
antenna. The optimization of the antenna’s dimensions has been accomplished through the implementation of a novel technique based on Taguchi’s method, capable of systematically searching wider areas, named as “Grid-Taguchi” method
Design, Development, and Testing of Research Payloads on Various Suborbital Flight-Test Platforms
With recent advances in the commercial space industry, suborbital payload launches have become more common and accessible to researchers actively seeking solutions for problems involving prolonged space travel and future missions to Moon and Mars. Suborbital payload missions compared to orbital launches are less expensive and offer faster turnaround times; however, the novelty of this domain provides unique challenges. This multidisciplinary research effort aims to tackle some of these challenges by detailing the design, development, and testing techniques followed in the successful launch and recovery of payload experiments in currently active and upcoming suborbital launch vehicles. The research methodology involves collecting payload requirements, CAD design, computational analysis, mass optimization, 3D printing, vibration, and load testing, model rocketry development, simulation, and launch operations. Structural analysis using FEA and vibration testing on a shaker table shows the compliance of the payload prototypes in the maximum predicted flight environments. Multiphase CFD analysis is used as benchmarking technique to characterize the behavior of payloads containing liquids in microgravity. Hands-on model rocketry has proven as a valuable research platform for subsequent payload deliveries
Book of abstracts of the 2nd International Conference of TEMA: mobilizing projects
Based on its Human Capital and Capacities, the Centre for Mechanical Technology and Automation (TEMA) embraces a mission aiming to contribute to a sustainable industry, with specially focus on the surrounding SMEs, and to the wellbeing of society. Sustainable manufacturing aims to contribute to the development of a sustainable industry by developments and innovations on manufacturing engineering and technologies, to increase productivity, improve products quality and reduce waste in production processes. Technologies for the Wellbeing wishes to contribute to the wellbeing of society by the development of supportive engineering systems focusing on people and their needs and intending to improve their quality of life.
TEMA intends to maximize its national and international impact in terms of scientific productivity and its transfer to society by tackling the relevant challenges of our time. TEMA is aware of the major challenges of our days, not only confined to scientific issues but also the societal ones, (a strategic pillar of the Horizon 2020 program), at the same time placing an effort to have its research disseminated, in high impact journals to the international scientific community. (...)publishe
Recommended from our members
Design, Deployment, Navigation, and Control of Mobile Robots for Perception and Sensor Data Collection
Aerial robots, including rotary-wing and fixed-wing unmanned aerial vehicles or UAVs, have shown great capabilities in surveying as well as search and rescue from above. However, either rotary-wing or fixed-wing UAVs have nearly insoluble flaws. In order to overcome the under-actuating nature of multi-rotor UAVs, Chapter 2 proposes modeling methods and control schemes for fully-actuated hexacopters. Additionally, rotary-wing robots suffer from limited battery life as well as lack of fail-safe mechanism upon losing motors, while fixed-wing robots lacks the ability to take off and land vertically. Therefore, Chapter 4 proposes a bio-inpired hybrid aerial robot to extend mutli-rotor flight time and fail-safe capability and provide fixed-wing glider with vertical take-off and landing or VTOL capability. Moreover, to extend the flight time and optimize the energy consumption of multi-rotor UAVs, Chapter 3 proposes a multi-disciplinary design optimization based flight trajectory optimizer involving linear rotor inflow models to reduce flight time or energy consumption of specific missions.In terms of unmanned ground vehicles or UGVs used for perception and mapping, there has been a research gap to provide a low-cost, highly agile over-actuated chassis design. Chapter 5 proposes a 3D-printable double Ackermann steering chassis design with 2-wheel standing and balancing capability to fill in this gap. Chapter 6, on the other hand, proposes the system design of a UGV capable of performing perception and mapping in a limited lighting, unstructured, and GPS-denied environment based on a nevertheless nonholonomic chassis, where primary concern becomes the reliability in performing real-time mapping and preservation of solely static environment.The last but not least topic discussed in this dissertation is to promote the role of UAV imagery in earthquake response. In Chapter 7 we combine the traditional UAV plan view perspective with north and east elevation view video data to provide motion estimation in all 6 degrees of freedom, as well as proposing Video Transformer for motion tracking.All in all, with attempts to expand and promote the designs, deployment and control schemes of both aerial and ground mobile robots, this dissertation strives to provide case study results and state-of-the-art methods for future robotics studies
- …