Radiation techniques for urban thermal simulation with the Finite Element Method

Modern societies are increasingly organized in cities. In the present times, more than half of the world’s population lives in urban settlements. In this context, architectural and building scale works have the need of extending their scope to the urban environment. One of the main challenges of these times is understanting all the thermal exchanges that happen in the city. The radiative part appears as the less developed one; its characterization and interaction with built structures has gained attention for building physics, architecture and environmental engineering. Providing a linkage between these areas, the emerging field of urban physics has become important for tackling studies of such nature. Urban thermal studies are intrinsically linked to multidisciplinary work approaches. Performing full-scale measurements is hard, and prototype models are difficult to develop. Therefore, computational simulations are essential in order to understand how the city behaves and to evaluate projected modifications. The methodological and algorithmic improvement of simulation is one of the mainlines of work for computational physics and many areas of computer science. The field of computer graphics has addressed the adaptation of rendering algorithms to daylighting using physically-based radiation models on architectural scenes. The Finite Element Method (FEM) has been widely used for thermal analysis. The maturity achieved by FEM software allows for treating very large models with a high geometrical detail and complexity. However, computing radiation exchanges in this context implies a hard computational challenge, and forces to push the limits of existing physical models. Computer graphics techniques can be adapted to FEM to estimate solar loads. In the thermal radiation range, the memory requirements for storing the interaction between the elements grows because all the urban surfaces become radiation sources. In this thesis, a FEM-based methodology for urban thermal analysis is presented. A set of radiation techniques (both for solar and thermal radiation) are developed and integrated into the FEM software Cast3m. Radiosity and ray tracing are used as the main algorithms for radiation computations. Several studies are performed for different city scenes. The FEM simulation results are com-pared with measured temperature results obtained by means of urban thermography. Post-processing techniques are used to obtain rendered thermograms, showing that the proposed methodology pro-duces accurate results for the cases analyzed. Moreover, its good computational performance allows for performing this kind of study using regular desktop PCs.Las sociedades modernas están cada vez más organizadas en ciudades. Más de la mitad de la población mundial vive en asentamientos urbanos en la actualidad. En este contexto, los trabajos a escala arquitectónica y de edificio deben extender su alcance al ambiente urbano. Uno de los mayores desafíos de estos tiempos consiste en entender todos los intercambios térmicos que suceden en la ciudad. La parte radiativa es la menos desarrollada; su caracterización y su interacción con edificaciones ha ganado la atención de la física de edificios, la arquitectura y la ingeniería ambiental. Como herramienta de conexión entre estas áreas, la física urbana es un área que resulta importante para atacar estudios de tal naturaleza. Los estudios térmicos urbanos están intrinsecamente asociados a trabajos multidisciplinarios. Llevar a cabo mediciones a escala real resulta difícil, y el desarrollo de prototipos de menor escala es complejo. Por lo tanto, la simulación computacional es esencial para entender el comportamiento de la ciudad y para evaluar modificaciones proyectadas. La mejora metodológica y algorítmica de las simulaciones es una de las mayores líneas de trabajo para la física computacional y muchas áreas de las ciencias de la computación. El área de la computación gráfica ha abordado la adaptación de algoritmos de rendering para cómputo de iluminación natural, utilizando modelos de radiación basados en la física y aplicándolos sobre escenas arquitectónicas. El Método de Elementos Finitos (MEF) ha sido ampliamente utilizado para análisis térmico. La madurez alcanzada por soluciones de software MEF permite tratar grandes modelos con un alto nivel de detalle y complejidad geométrica. Sin embargo, el cómputo del intercambio radiativo en este contexto implica un desafío computacional, y obliga a empujar los límites de las descripciones físicas conocidas. Algunas técnicas de computación gráfica pueden ser adaptadas a MEF para estimar las cargas solares. En el espectro de radiación térmica, los requisitos de memoria necesarios para almacenar la interacción entre los elementos crecen debido a que todas las superficies urbanas se transforman en fuentes emisoras de radiación. En esta tesis se presenta una metodología basada en MEF para el análisis térmico de escenas urbanas. Un conjunto de técnicas de radiación (para radiación solar y térmica) son desarrolladas e integradas en el software MEF Cast3m. Los algoritmos de radiosidad y ray tracing son utilizados para el cómputo radiativo. Se presentan varios estudios que utilizan diferentes modelos de ciudades. Los resultados obtenidos mediante MEF son comparados con temperaturas medidas por medio de termografías urbanas. Se utilizan técnicas de post-procesamiento para renderizar imágenes térmicas, que permiten concluir que la metodología propuesta produce resultados precisos para los casos analizados. Asimismo, su buen desempeño computacional posibilita realizar este tipo de estudios en computadoras personales

A Gathering and Shooting Progressive Refinement Radiosity Method

This paper presents a gathering and shooting progressive refinement radiosity method. Our method integrates the iterative process of light energy gathering used in the standard full matrix method and the iterative process of light energy shooting used in the conventional progressive refinement method. As usual, in each iteration, the algorithm first selects the patch which holds the maximum unprocessed light energy in the environment as the shooting patch. But before the shooting process is activated, a light energy gathering process takes place. In this gathering process, the amount of the unprocessed light energy which is supposed to be shot to the current shooting patch from the rest of the environment in later iterations is pre-accumulated. In general, this extra amount of gathered light energy is far from trivial since it comes from every patch in the environment from which the current shooting patch can be seen. However, with the reciprocity relationship for form-factors, still only one hemi-cube of the form-factors is needed in each iteration step. Based on a concise record of the history of the unprocessed light energy distribution in the environment, a new progressive refinement algorithm with revised gathering and shooting procedures is then proposed. With little additional computation and memory usage compared to the conventional progressive refinement radiosity method, a solid convergence speedup is achieved. This gathering and shooting approach extends the capability of the radiosity method in accurate and efficient simulation of the global illuminations of complex environments

Novel illumination algorithms for off-line and real-time rendering

This thesis presents new and efficient illumination algorithms for off-line and real-time rendering. The realistic rendering of arbitrary indirect illumination is a difficult task. Assuming ray optics model of light, the rendering equation describes the propagation of light in the scene with high accuracy. However, the computation is expensive, and thus even in off-line rendering, i.e., in prerendered animations, indirect illumination is often approximated as it would otherwise constitute a bottleneck in the production pipeline. Indirect illumination can be computed using Monte Carlo integration, but when restrained to a reasonable amount of computation time, the result is often corrupted by noise. This thesis includes a method that effectively reduces the noise by applying a spatially varying filter to the noisy illumination. For real-time performance, some components of indirect illumination can be precomputed. Irradiance volume and many variations of it precompute reflections and shadowing of a static scene into a volumetric data structure. This data is then used to shade dynamic objects in real-time. The practical usage of the method is limited due to aliasing artifacts. This thesis shows that with a suitable super-sampling approach, a significant quality improvement can be obtained. Another direction is to precompute how light propagates in the scene and use the precomputed data during run-time to solve both direct and indirect illumination based on the known incident lighting. To keep the memory and precomputation costs tractable, these methods are typically restricted to infinitely distant lighting. Those that are not, require a very long precomputation time. This thesis presents an algorithm that adopts a wavelet-based hierarchical finite element method for the precomputation. A significant performance improvement over the existing techniques is obtained. When full global illumination cannot be afforded, ambient occlusion is an attractive alternative. This thesis includes two methods for real-time rendering of ambient occlusion in dynamic scenes. The first method models the shadowing of ambient light between rigid moving bodies. The second method gives a data-oriented solution for rendering approximate ambient occlusion for animated characters in real-time. Both methods achieve unprecedented efficiency.reviewe

Photorealistic physically based render engines: a comparative study

Pérez Roig, F. (2012). Photorealistic physically based render engines: a comparative study. http://hdl.handle.net/10251/14797.Archivo delegad

Perspective-Driven Radiosity on Graphics Hardware

Radiosity is a global illumination algorithm used by artists, architects, and engineers for its realistic simulation of lighting. Since the illumination model is global, complexity and run time grow as larger environments are provided. Algorithms exist which generate an incremental result and provide weighting based on the user's view of the environment. This thesis introduces an algorithm for directing and focusing radiosity calculations relative to the user's point-of-view and within the user's field-of-view, generating visually interesting results for a localized area more quickly than a traditional global approach. The algorithm, referred to as perspective-driven radiosity, is an extension of the importance-driven radiosity algorithm, which itself is an extension of the progressive refinement radiosity algorithm. The software implemented during research into the point-of-view/field-of-view-driven algorithm can demonstrate both of these algorithms, and can generate results for arbitrary geometry. Parameters can be adjusted by the user to provide results that favor speed or quality. To take advantage of the scalability of programmable graphics hardware, the algorithm is implemented as an extension of progressive refinement radiosity on the GPU, using OpenGL and GLSL. Results from each of the three implemented radiosity algorithms are compared using a variety of geometry

Parallelization of hierarchical radiosity algorithms on distributed memory computers

Ankara : Department of Computer Engineering and Information Science and the Institute of Engineering and Science of Bilkent Univ., 1998.Thesis (Master's) -- Bilkent University, 1998.Includes bibliographical references leaves 93-97.Şireli, Ahmet ReşatM.S

Progressive Geometric View Factors for Radiative Thermal Simulation

International audienceRadiative heat transfer or light transport are primarily governed by geometric view factors between surface elements. For general surfaces, calculating accurate geometric view factors requires solving integrals via quadrature methods. For complex scenes with many objects and obstacles such calculations are compute-intensive, preventing real-time simulations. The progressive approach detailed here takes as input objects represented by surface triangle meshes and generates as output a dense square matrix of geometric view factors whose accuracy improves over time. The technical parameters of the approaches explained in this paper (hybrid triangle-based and point-based quadratures, tree-based data structure, segment-based probing and prediction) are selected to best trade accuracy for time