Reducing DRAM Row Activations with Eager Writeback

This thesis describes and evaluates a new approach to optimizing DRAM performance and energy consumption that is based on eagerly writing dirty cache lines to DRAM. Under this approach, dirty cache lines that have not been recently accessed are eagerly written to DRAM when the corresponding row has been activated by an ordinary access, such as a read. This approach enables clustering of reads and writes that target the same row, resulting in a significant reduction in row activations. Specifically, for 29 applications, it reduces the number of DRAM row activations by an average of 38% and a maximum of 81%. The results from a full system simulator show that for the 29 applications, 11 have performance improvements between 10% and 20%, and 9 have improvements in excess of 20%. Furthermore, 10 consume between 10% and 20% less DRAM energy, and 10 have energy consumption reductions in excess of 20%

Improving Processor Design by Exploiting Performance Variance

Programs exhibit significant performance variance in their access to microarchitectural structures. There are three types of performance variance. First, semantically equivalent programs running on the same system can yield different performance due to characteristics of microarchitectural structures. Second, program phase behavior varies significantly. Third, different types of operations on microarchitectural structure can lead to different performance. In this dissertation, we explore the performance variance and propose techniques to improve the processor design. We explore performance variance caused by microarchitectural structures and propose program interferometry, a technique that perturbs benchmark executables to yield a wide variety of performance points without changing program semantics or other important execution characteristics such as the number of retired instructions. By observing the behavior of the benchmarks over a range of branch prediction accuracies, we can estimate the impact of a microarchitectural optimization optimization and not the rest of the microarchitecture. We explore performance variance caused by phase changes and develop prediction-driven last-level cache (LLC) writeback techniques. We propose a rank idle time prediction driven LLC writeback technique and a last-write prediction driven LLC writeback technique. These techniques improve performance by reducing the write-induced interference. We explore performance variance caused by different types of operations to Non-Volatile Memory (NVM) and propose LLC management policies to reduce write overhead of NVM.We propose an adaptive placement and migration policy for an STT-RAM-based hybrid cache and writeback aware dynamic cache management for NVM-based main memory system. These techniques reduce write latency and write energy, thus leading to performance improvement and energy reduction

BuMP: Bulk Memory Access Prediction and Streaming

With the end of Dennard scaling, server power has emerged as the limiting factor in the quest for more capable datacenters. Without the benefit of supply voltage scaling, it is essential to lower the energy per operation to improve server efficiency. As the industry moves to lean-core server processors, the energy bottleneck is shifting toward main memory as a chief source of server energy consumption in modern datacenters. Maximizing the energy efficiency of today's DRAM chips and interfaces requires amortizing the costly DRAM page activations over multiple row buffer accesses. This work introduces Bulk Memory Access Prediction and Streaming, or BuMP. We make the observation that a significant fraction (59-79%) of all memory accesses fall into DRAM pages with high access density, meaning that the majority of their cache blocks will be accessed within a modest time frame of the first access. Accesses to high-density DRAM pages include not only memory reads in response to load instructions, but also reads stemming from store instructions as well as memory writes upon a dirty LLC eviction. The remaining accesses go to low-density pages and virtually unpredictable reference patterns (e.g., hashed key lookups). BuMP employs a low-cost predictor to identify high-density pages and triggers bulk transfer operations upon the first read or write to the page. In doing so, BuMP enforces high row buffer locality where it is profitable, thereby reducing DRAM energy per access by 23%, and improves server throughput by 11% across a wide range of server applications

Memory Management for Emerging Memory Technologies

The Memory Wall, or the gap between CPU speed and main memory latency, is ever increasing. The latency of Dynamic Random-Access Memory (DRAM) is now of the order of hundreds of CPU cycles. Additionally, the DRAM main memory is experiencing power, performance and capacity constraints that limit process technology scaling. On the other hand, the workloads running on such systems are themselves changing due to virtualization and cloud computing demanding more performance of the data centers. Not only do these workloads have larger working set sizes, but they are also changing the way memory gets used, resulting in higher sharing and increased bandwidth demands. New Non-Volatile Memory technologies (NVM) are emerging as an answer to the current main memory issues. This thesis looks at memory management issues as the emerging memory technologies get integrated into the memory hierarchy. We consider the problems at various levels in the memory hierarchy, including sharing of CPU LLC, traffic management to future non-volatile memories behind the LLC, and extending main memory through the employment of NVM. The first solution we propose is “Adaptive Replacement and Insertion" (ARI), an adaptive approach to last-level CPU cache management, optimizing the cache miss rate and writeback rate simultaneously. Our specific focus is to reduce writebacks as much as possible while maintaining or improving miss rate relative to conventional LRU replacement policy, with minimal hardware overhead. ARI reduces writebacks on benchmarks from SPEC2006 suite on average by 32.9% while also decreasing misses on average by 4.7%. In a PCM based memory system, this decreases energy consumption by 23% compared to LRU and provides a 49% lifetime improvement beyond what is possible with randomized wear-leveling. Our second proposal is “Variable-Timeslice Thread Scheduling" (VATS), an OS kernel-level approach to CPU cache sharing. With modern, large, last-level caches (LLC), the time to fill the LLC is greater than the OS scheduling window. As a result, when a thread aggressively thrashes the LLC by replacing much of the data in it, another thread may not be able to recover its working set before being rescheduled. We isolate the threads in time by increasing their allotted time quanta, and allowing larger periods of time between interfering threads. Our approach, compared to conventional scheduling, mitigates up to 100% of the performance loss caused by CPU LLC interference. The system throughput is boosted by up to 15%. As an unconventional approach to utilizing emerging memory technologies, we present a Ternary Content-Addressable Memory (TCAM) design with Flash transistors. TCAM is successfully used in network routing but can also be utilized in the OS Virtual Memory applications. Based on our layout and circuit simulation experiments, we conclude that our FTCAM block achieves an area improvement of 7.9× and a power improvement of 1.64× compared to a CMOS approach. In order to lower the cost of Main Memory in systems with huge memory demand, it is becoming practical to extend the DRAM in the system with the less-expensive NVMe Flash, for a much lower system cost. However, given the relatively high Flash devices access latency, naively using them as main memory leads to serious performance degradation. We propose OSVPP, a software-only, OS swap-based page prefetching scheme for managing such hybrid DRAM + NVM systems. We show that it is possible to gain about 50% of the lost performance due to swapping into the NVM and thus enable the utilization of such hybrid systems for memory-hungry applications, lowering the memory cost while keeping the performance comparable to the DRAM-only system

Memory Management for Emerging Memory Technologies

The Memory Wall, or the gap between CPU speed and main memory latency, is ever increasing. The latency of Dynamic Random-Access Memory (DRAM) is now of the order of hundreds of CPU cycles. Additionally, the DRAM main memory is experiencing power, performance and capacity constraints that limit process technology scaling. On the other hand, the workloads running on such systems are themselves changing due to virtualization and cloud computing demanding more performance of the data centers. Not only do these workloads have larger working set sizes, but they are also changing the way memory gets used, resulting in higher sharing and increased bandwidth demands. New Non-Volatile Memory technologies (NVM) are emerging as an answer to the current main memory issues. This thesis looks at memory management issues as the emerging memory technologies get integrated into the memory hierarchy. We consider the problems at various levels in the memory hierarchy, including sharing of CPU LLC, traffic management to future non-volatile memories behind the LLC, and extending main memory through the employment of NVM. The first solution we propose is “Adaptive Replacement and Insertion" (ARI), an adaptive approach to last-level CPU cache management, optimizing the cache miss rate and writeback rate simultaneously. Our specific focus is to reduce writebacks as much as possible while maintaining or improving miss rate relative to conventional LRU replacement policy, with minimal hardware overhead. ARI reduces writebacks on benchmarks from SPEC2006 suite on average by 32.9% while also decreasing misses on average by 4.7%. In a PCM based memory system, this decreases energy consumption by 23% compared to LRU and provides a 49% lifetime improvement beyond what is possible with randomized wear-leveling. Our second proposal is “Variable-Timeslice Thread Scheduling" (VATS), an OS kernel-level approach to CPU cache sharing. With modern, large, last-level caches (LLC), the time to fill the LLC is greater than the OS scheduling window. As a result, when a thread aggressively thrashes the LLC by replacing much of the data in it, another thread may not be able to recover its working set before being rescheduled. We isolate the threads in time by increasing their allotted time quanta, and allowing larger periods of time between interfering threads. Our approach, compared to conventional scheduling, mitigates up to 100% of the performance loss caused by CPU LLC interference. The system throughput is boosted by up to 15%. As an unconventional approach to utilizing emerging memory technologies, we present a Ternary Content-Addressable Memory (TCAM) design with Flash transistors. TCAM is successfully used in network routing but can also be utilized in the OS Virtual Memory applications. Based on our layout and circuit simulation experiments, we conclude that our FTCAM block achieves an area improvement of 7.9× and a power improvement of 1.64× compared to a CMOS approach. In order to lower the cost of Main Memory in systems with huge memory demand, it is becoming practical to extend the DRAM in the system with the less-expensive NVMe Flash, for a much lower system cost. However, given the relatively high Flash devices access latency, naively using them as main memory leads to serious performance degradation. We propose OSVPP, a software-only, OS swap-based page prefetching scheme for managing such hybrid DRAM + NVM systems. We show that it is possible to gain about 50% of the lost performance due to swapping into the NVM and thus enable the utilization of such hybrid systems for memory-hungry applications, lowering the memory cost while keeping the performance comparable to the DRAM-only system

Enhancement of Writeback Caching by changes in flush and its parameters

Achievement of high performance in computing or accessing of data is the aim of any system. Reduction of access time to a particular data which is present in the device is very important for the enhancement in the performance. Caching is implemented to do the same. The group of cache device and the virtual device is made as a cache group to enhance the performance of the system. The system may not be on the same condition different instances of time. There will always be a variation in io rates of the application, which is not utilized for the full extent. These differences in the io rates can be utilized effectively for the enhancement of the performance of the system. When the system is idle of with less io then the system will force the flush so that the inconsistency of data is reduced. When the system is being bombarded with io then less threads are given for the flush io. These variations in the threads assigned for the implementation of flush io will enhance the overall performance of the system

Mitigating bank conflicts in main memory via selective data duplication and migration

Main memory is organized as a hierarchy of banks, rows, and columns. Only data from a single row can be accessed from each bank at any given time. Switching between different rows of the same bank requires serializing long latency operations to the bank. Consequently, memory performance suffers on bank conflicts when concurrent requests access different rows of the same bank. Many prior solutions to the bank conflict problem required modifications to the memory device and/or the memory access protocol. Such modifications create hurdles for adoption due to the commodity nature of the memory business. Instead, I propose two new runtime solutions that work with unmodified memory devices and access protocols. The first, Duplicon Cache, duplicates select data to multiple banks, allowing duplicated data to be sourced from either the original bank or the alternate bank, whichever is more lightly loaded. The second, Continuous Row Compaction, identifies data that are frequently accessed together, then migrates them to non-conflicting rows across different banks. To limit the data transfer overhead from data duplication and migration, only select data are duplicated/migrated. The key is to identify large working sets of the running applications that remain stable over very long time intervals, and slowly duplicate/migrate them over time, amortizing the cost of duplication/migration. In effect, the set of duplicated/migrated data form a cache within main memory that captures large stable working sets of the application.Electrical and Computer Engineerin

Improving the Performance and Endurance of Persistent Memory with Loose-Ordering Consistency

Persistent memory provides high-performance data persistence at main memory. Memory writes need to be performed in strict order to satisfy storage consistency requirements and enable correct recovery from system crashes. Unfortunately, adhering to such a strict order significantly degrades system performance and persistent memory endurance. This paper introduces a new mechanism, Loose-Ordering Consistency (LOC), that satisfies the ordering requirements at significantly lower performance and endurance loss. LOC consists of two key techniques. First, Eager Commit eliminates the need to perform a persistent commit record write within a transaction. We do so by ensuring that we can determine the status of all committed transactions during recovery by storing necessary metadata information statically with blocks of data written to memory. Second, Speculative Persistence relaxes the write ordering between transactions by allowing writes to be speculatively written to persistent memory. A speculative write is made visible to software only after its associated transaction commits. To enable this, our mechanism supports the tracking of committed transaction ID and multi-versioning in the CPU cache. Our evaluations show that LOC reduces the average performance overhead of memory persistence from 66.9% to 34.9% and the memory write traffic overhead from 17.1% to 3.4% on a variety of workloads.Comment: This paper has been accepted by IEEE Transactions on Parallel and Distributed System

Staged reads: mitigating the impact of DRAM writes on DRAM reads

Journal ArticleMain memory latencies have always been a concern for system performance. Given that reads are on the criti- cal path for CPU progress, reads must be prioritized over writes. However, writes must be eventually processed and they often delay pending reads. In fact, a single channel in the main memory system offers almost no parallelism between reads and writes. This is because a single off-chip memory bus is shared by reads and writes and the direction of the bus has to be explicitly turned around when switching from writes to reads. This is an expensive operation and its cost is amortized by carrying out a burst of writes or reads every time the bus direction is switched. As a result, no reads can be processed while a memory channel is busy servicing writes. This paper proposes a novel mechanism to boost read-write parallelism and perform useful components of read operations even when the memory system is busy performing writes. If some of the banks are busy servicing writes, we start issuing reads to the other idle banks. The results of these reads are stored in a few registers near the memory chip's I/O pads. These results are quickly returned immediately following the bus turnaround. The process is referred to as a Staged Read because it decouples a single read operation into two stages, with the first step being performed in parallel with writes. This innovation can also be viewed as a form of prefetch that is internal to a memory chip. The proposed tech- nique works best when there is bank imbalance in the write stream. We also introduce a write scheduling algorithm that artificially creates bank imbalance and allows useful read operations to be performed during the write drain. Across a suite of memory-intensive workloads, we show that Staged Reads can boost throughput by up to 33% (average 7%) with an average DRAM access latency improvement of 17%, while incurring a very small cost (0.25%) in terms of memory chip area. The throughput improvements are even greater when considering write-intensive work-loads (average 11%) or future systems (average 12%)

Memory Systems and Interconnects for Scale-Out Servers

The information revolution of the last decade has been fueled by the digitization of almost all human activities through a wide range of Internet services. The backbone of this information age are scale-out datacenters that need to collect, store, and process massive amounts of data. These datacenters distribute vast datasets across a large number of servers, typically into memory-resident shards so as to maintain strict quality-of-service guarantees. While data is driving the skyrocketing demands for scale-out servers, processor and memory manufacturers have reached fundamental efficiency limits, no longer able to increase server energy efficiency at a sufficient pace. As a result, energy has emerged as the main obstacle to the scalability of information technology (IT) with huge economic implications. Delivering sustainable IT calls for a paradigm shift in computer system design. As memory has taken a central role in IT infrastructure, memory-centric architectures are required to fully utilize the IT's costly memory investment. In response, processor architects are resorting to manycore architectures to leverage the abundant request-level parallelism found in data-centric applications. Manycore processors fully utilize available memory resources, thereby increasing IT efficiency by almost an order of magnitude. Because manycore server chips execute a large number of concurrent requests, they exhibit high incidence of accesses to the last-level-cache for fetching instructions (due to large instruction footprints), and off-chip memory (due to lack of temporal reuse in on-chip caches) for accessing dataset objects. As a result, on-chip interconnects and the memory system are emerging as major performance and energy-efficiency bottlenecks in servers. This thesis seeks to architect on-chip interconnects and memory systems that are tuned for the requirements of memory-centric scale-out servers. By studying a wide range of data-centric applications, we uncover application phenomena common in data-centric applications, and examine their implications on on-chip network and off-chip memory traffic. Finally, we propose specialized on-chip interconnects and memory systems that leverage common traffic characteristics, thereby improving server throughput and energy efficiency