Exploiting Adaptive Techniques to Improve Processor Energy Efficiency

Rapid device-miniaturization keeps on inducing challenges in building energy efficient microprocessors. As the size of the transistors continuously decreasing, more uncertainties emerge in their operations. On the other hand, integrating more and more transistors on a single chip accentuates the need to lower its supply-voltage. This dissertation investigates one of the primary device uncertainties - timing error, in microprocessor performance bottleneck in NTC era. Then it proposes various innovative techniques to exploit these opportunities to maintain processor energy efficiency, in the context of emerging challenges. Evaluated with the cross-layer methodology, the proposed approaches achieve substantial improvements in processor energy efficiency, compared to other start-of-art techniques

An automated OpenCL FPGA compilation framework targeting a configurable, VLIW chip multiprocessor

Modern system-on-chips augment their baseline CPU with coprocessors and accelerators to increase overall computational capacity and power efficiency, and thus have evolved into heterogeneous systems. Several languages have been developed to enable this paradigm shift, including CUDA and OpenCL. This thesis discusses a unified compilation environment to enable heterogeneous system design through the use of OpenCL and a customised VLIW chip multiprocessor (CMP) architecture, known as the LE1. An LLVM compilation framework was researched and a prototype developed to enable the execution of OpenCL applications on the LE1 CPU. The framework fully automates the compilation flow and supports work-item coalescing to better utilise the CPU cores and alleviate the effects of thread divergence. This thesis discusses in detail both the software stack and target hardware architecture and evaluates the scalability of the proposed framework on a highly precise cycle-accurate simulator. This is achieved through the execution of 12 benchmarks across 240 different machine configurations, as well as further results utilising an incomplete development branch of the compiler. It is shown that the problems generally scale well with the LE1 architecture, up to eight cores, when the memory system becomes a serious bottleneck. Results demonstrate superlinear performance on certain benchmarks (x9 for the bitonic sort benchmark with 8 dual-issue cores) with further improvements from compiler optimisations (x14 for bitonic with the same configuration

Adaptive Distributed Architectures for Future Semiconductor Technologies.

Year after year semiconductor manufacturing has been able to integrate more components in a single computer chip. These improvements have been possible through systematic shrinking in the size of its basic computational element, the transistor. This trend has allowed computers to progressively become faster, more efficient and less expensive. As this trend continues, experts foresee that current computer designs will face new challenges, in utilizing the minuscule devices made available by future semiconductor technologies. Today's microprocessor designs are not fit to overcome these challenges, since they are constrained by their inability to handle component failures by their lack of adaptability to a wide range of custom modules optimized for specific applications and by their limited design modularity. The focus of this thesis is to develop original computer architectures, that can not only survive these new challenges, but also leverage the vast number of transistors available to unlock better performance and efficiency. The work explores and evaluates new software and hardware techniques to enable the development of novel adaptive and modular computer designs. The thesis first explores an infrastructure to quantitatively assess the fallacies of current systems and their inadequacy to operate on unreliable silicon. In light of these findings, specific solutions are then proposed to strengthen digital system architectures, both through hardware and software techniques. The thesis culminates with the proposal of a radically new architecture design that can fully adapt dynamically to operate on the hardware resources available on chip, however limited or abundant those may be.PHDComputer Science and EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/102405/1/apellegr_1.pd

Heterogeneity-awareness in multithreaded multicore processors

During the last decades, Computer Architecture has experienced a great series of revolutionary changes. The increasing transistor count on a single chip has led to some of the main milestones in the field, from the release of the first Superscalar (1965) to the state-of-the-art Multithreaded Multicore Architectures, like the Intel Core i7 (2009).Moore's Law has continued for almost half of a century and is not expected to stop for at least another decade, and perhaps much longer. Moore observed a trend in the process technology advances. So, the number of transistors that can be placed inexpensively on an integrated circuit has increased exponentially, doubling approximately every two years. Nevertheless, having more available transistors can not be always directly translated into having more performance.The complexity of state-of-the-art software has reached heights unthinkable in prior ages, both in terms of the amount of computation and the complexity involved. If we deeply analyze this complexity in software we would realize that software is comprised of smaller execution processes that, although maintaining certain spatial/temporal locality, imply an inherently heterogeneous behavior. That is, during execution time the hardware executes very different portions of software, with huge differences in terms of behavior and hardware requirements. This heterogeneity in the behaviour of the software is not specific of the latest videogame, but it is inherent to software programming itself, since the very beginning of Algorithmics.In this PhD dissertation we deeply analyze the inherent heterogeneity present in software behavior. We identify the main issues and sources of this heterogeneity, that hamper most of the state-of-the-art processor designs from obtaining their maximum potential. Hence, the heterogeneity in software turns most of the current processors, commonly called general-purpose processors, into overdesigned. That is, they have much more hardware resources than really needed to execute the software running on them. This fact would not represent a main problem if we were not concerned on the additional power consumption involved in software computation.The final goal of this PhD dissertation consists in assigning each portion of software exactly the amount of hardware resources really needed to fully exploit its maximal potential; without consuming more energy than the strictly needed. That is, obtaining complexity-effective executions using the inherent heterogeneity in software behavior as steering indicator. Thus, we start deeply analyzing the heterogenous behaviour of the software run on top of general-purpose processors and then matching it on top of a heterogeneously distributed hardware, which explicitly exploit heterogeneous hardware requirements. Only by being heterogeneity-aware in software, and appropriately matching this software heterogeneity on top of hardware heterogeneity, may we effectively obtain better processor designs.The PhD dissertation is comprised of four main contributions that cover both multithreaded single-core (hdSMT) and multicore (TCA Algorithm, hTCA Framework and MFLUSH) scenarios, deeply explained in their corresponding chapters in the PhD dissertation memory. Overall, these contributions cover a significant range of the Heterogeneity-Aware Processors' design space. Within this design space, we have focused on the state-of-the-art trend in processor design: Multithreaded Multicore (CMP+SMT) Processors.We make special emphasis on the MPsim simulation tool, specifically designed and developed for this PhD dissertation. This tool has already gone beyond this PhD dissertation, becoming a reference tool by an important group of researchers spread over the Computer Architecture Department (DAC) at the Polytechnic University of Catalonia (UPC), the Barcelona Supercomputing Center (BSC) and the University of Las Palmas de Gran Canaria (ULPGC)

Energy Aware Runtime Systems for Elastic Stream Processing Platforms

Following an invariant growth in the required computational performance of processors, the multicore revolution started around 20 years ago. This revolution was mainly an answer to power dissipation constraints restricting the increase of clock frequency in single-core processors. The multicore revolution not only brought in the challenge of parallel programming, i.e. being able to develop software exploiting the entire capabilities of manycore architectures, but also the challenge of programming heterogeneous platforms. The question of “on which processing element to map a specific computational unit?”, is well known in the embedded community. With the introduction of general-purpose graphics processing units (GPGPUs), digital signal processors (DSPs) along with many-core processors on different system-on-chip platforms, heterogeneous parallel platforms are nowadays widespread over several domains, from consumer devices to media processing platforms for telecom operators. Finding mapping together with a suitable hardware architecture is a process called design-space exploration. This process is very challenging in heterogeneous many-core architectures, which promise to offer benefits in terms of energy efficiency. The main problem is the exponential explosion of space exploration. With the recent trend of increasing levels of heterogeneity in the chip, selecting the parameters to take into account when mapping software to hardware is still an open research topic in the embedded area. For example, the current Linux scheduler has poor performance when mapping tasks to computing elements available in hardware. The only metric considered is CPU workload, which as was shown in recent work does not match true performance demands from the applications. Doing so may produce an incorrect allocation of resources, resulting in a waste of energy. The origin of this research work comes from the observation that these approaches do not provide full support for the dynamic behavior of stream processing applications, especially if these behaviors are established only at runtime. This research will contribute to the general goal of developing energy-efficient solutions to design streaming applications on heterogeneous and parallel hardware platforms. Streaming applications are nowadays widely spread in the software domain. Their distinctive characiteristic is the retrieving of multiple streams of data and the need to process them in real time. The proposed work will develop new approaches to address the challenging problem of efficient runtime coordination of dynamic applications, focusing on energy and performance management.Efter en oföränderlig tillväxt i prestandakrav hos processorer, började den flerkärniga processor-revolutionen för ungefär 20 år sedan. Denna revolution skedde till största del som en lösning till begränsningar i energieffekten allt eftersom klockfrekvensen kontinuerligt höjdes i en-kärniga processorer. Den flerkärniga processor-revolutionen medförde inte enbart utmaningen gällande parallellprogrammering, m.a.o. förmågan att utveckla mjukvara som använder sig av alla delelement i de flerkärniga processorerna, men också utmaningen med programmering av heterogena plattformar. Frågeställningen ”på vilken processorelement skall en viss beräkning utföras?” är väl känt inom ramen för inbyggda datorsystem. Efter introduktionen av grafikprocessorer för allmänna beräkningar (GPGPU), signalprocesserings-processorer (DSP) samt flerkärniga processorer på olika system-on-chip plattformar, är heterogena parallella plattformar idag omfattande inom många domäner, från konsumtionsartiklar till mediaprocesseringsplattformar för telekommunikationsoperatörer. Processen att placera beräkningarna på en passande hårdvaruplattform kallas för utforskning av en designrymd (design-space exploration). Denna process är mycket utmanande för heterogena flerkärniga arkitekturer, och kan medföra fördelar när det gäller energieffektivitet. Det största problemet är att de olika valmöjligheterna i designrymden kan växa exponentiellt. Enligt den nuvarande trenden som förespår ökad heterogeniska aspekter i processorerna är utmaningen att hitta den mest passande placeringen av beräkningarna på hårdvaran ännu en forskningsfråga inom ramen för inbyggda datorsystem. Till exempel, den nuvarande schemaläggaren i Linux operativsystemet är inkapabel att hitta en effektiv placering av beräkningarna på den underliggande hårdvaran. Det enda mätsättet som används är processorns belastning vilket, som visats i tidigare forskning, inte motsvarar den verkliga prestandan i applikationen. Användning av detta mätsätt vid resursallokering resulterar i slöseri med energi. Denna forskning härstammar från observationerna att dessa tillvägagångssätt inte stöder det dynamiska beteendet hos ström-processeringsapplikationer (stream processing applications), speciellt om beteendena bara etableras vid körtid. Denna forskning kontribuerar till det allmänna målet att utveckla energieffektiva lösningar för ström-applikationer (streaming applications) på heterogena flerkärniga hårdvaruplattformar. Ström-applikationer är numera mycket vanliga i mjukvarudomän. Deras distinkta karaktär är inläsning av flertalet dataströmmar, och behov av att processera dem i realtid. Arbetet i denna forskning understöder utvecklingen av nya sätt för att lösa det utmanade problemet att effektivt koordinera dynamiska applikationer i realtid och fokus på energi- och prestandahantering

Designing energy-efficient computing systems using equalization and machine learning

As technology scaling slows down in the nanometer CMOS regime and mobile computing becomes more ubiquitous, designing energy-efficient hardware for mobile systems is becoming increasingly critical and challenging. Although various approaches like near-threshold computing (NTC), aggressive voltage scaling with shadow latches, etc. have been proposed to get the most out of limited battery life, there is still no “silver bullet” to increasing power-performance demands of the mobile systems. Moreover, given that a mobile system could operate in a variety of environmental conditions, like different temperatures, have varying performance requirements, etc., there is a growing need for designing tunable/reconfigurable systems in order to achieve energy-efficient operation. In this work we propose to address the energy- efficiency problem of mobile systems using two different approaches: circuit tunability and distributed adaptive algorithms. Inspired by the communication systems, we developed feedback equalization based digital logic that changes the threshold of its gates based on the input pattern. We showed that feedback equalization in static complementary CMOS logic enabled up to 20% reduction in energy dissipation while maintaining the performance metrics. We also achieved 30% reduction in energy dissipation for pass-transistor digital logic (PTL) with equalization while maintaining performance. In addition, we proposed a mechanism that leverages feedback equalization techniques to achieve near optimal operation of static complementary CMOS logic blocks over the entire voltage range from near threshold supply voltage to nominal supply voltage. Using energy-delay product (EDP) as a metric we analyzed the use of the feedback equalizer as part of various sequential computational blocks. Our analysis shows that for near-threshold voltage operation, when equalization was used, we can improve the operating frequency by up to 30%, while the energy increase was less than 15%, with an overall EDP reduction of ≈10%. We also observe an EDP reduction of close to 5% across entire above-threshold voltage range. On the distributed adaptive algorithm front, we explored energy-efficient hardware implementation of machine learning algorithms. We proposed an adaptive classifier that leverages the wide variability in data complexity to enable energy-efficient data classification operations for mobile systems. Our approach takes advantage of varying classification hardness across data to dynamically allocate resources and improve energy efficiency. On average, our adaptive classifier is ≈100× more energy efficient but has ≈1% higher error rate than a complex radial basis function classifier and is ≈10× less energy efficient but has ≈40% lower error rate than a simple linear classifier across a wide range of classification data sets. We also developed a field of groves (FoG) implementation of random forests (RF) that achieves an accuracy comparable to Convolutional Neural Networks (CNN) and Support Vector Machines (SVM) under tight energy budgets. The FoG architecture takes advantage of the fact that in random forests a small portion of the weak classifiers (decision trees) might be sufficient to achieve high statistical performance. By dividing the random forest into smaller forests (Groves), and conditionally executing the rest of the forest, FoG is able to achieve much higher energy efficiency levels for comparable error rates. We also take advantage of the distributed nature of the FoG to achieve high level of parallelism. Our evaluation shows that at maximum achievable accuracies FoG consumes ≈1.48×, ≈24×, ≈2.5×, and ≈34.7× lower energy per classification compared to conventional RF, SVM-RBF , Multi-Layer Perceptron Network (MLP), and CNN, respectively. FoG is 6.5× less energy efficient than SVM-LR, but achieves 18% higher accuracy on average across all considered datasets

Automatic Rescaling and Tuning of Big Data Applications on Container-Based Virtual Environments

Programa Oficial de Doutoramento en Investigación en Tecnoloxías da Información. 524V01[Resumo] As aplicacións Big Data actuais evolucionaron dun xeito significativo, dende fluxos de traballo baseados en procesamento por lotes ata outros máis complexos que poden requirir múltiples etapas de procesamento usando diferentes tecnoloxías, e mesmo executándose en tempo real. Doutra banda, para despregar estas aplicacións, os clusters ‘commodity’ foron substituídos nalgúns casos por paradigmas máis flexibles como o Cloud, ou mesmo por outros emerxentes como a computación ‘serverless’, precisando ambos paradigmas de tecnoloxías de virtualización. Esta Tese propón dúas contornas que proporcionan modos alternativos de realizar unha análise en profundidade e unha mellor xestión dos recursos de aplicacións Big Data despregadas en contornas virtuais baseadas en contedores software. Por unha banda, a contorna BDWatchdog permite realizar unha análise de gran fino e en tempo real en termos do uso dos recursos do sistema e do perfilado do código. Doutra banda, descríbese unha contorna para o reescalado dinámico e en tempo real dos recursos segundo un conxunto de políticas configurables. A primeira política proposta céntrase no reescalado automático dos recursos dos contedores segundo o uso real que as aplicacións fan dos mesmos, proporcionando así unha contorna ‘serverless’. Ademais, preséntase unha política alternativa centrada na xestión enerxética que permite implementar os conceptos de limitación e presuposto de potencia, que poden aplicarse a contedores, aplicacións ou mesmo usuarios. En xeral, as contornas propostas nesta Tese tratan de poñer de relevo o potencial de aplicar novos xeitos de analizar e axustar os recursos das aplicacións Big Data despregadas en clusters de contedores, mesmo en tempo real. Os casos de uso presentados son exemplos diso, demostrando que as aplicacións Big Data poden adaptarse a novas tecnoloxías ou paradigmas sen teren que cambiar as súas características máis intrínsecas.[Resumen] Las aplicaciones Big Data actuales han evolucionado de forma significativa, desde flujos de trabajo basados en procesamiento por lotes hasta otros más complejos que pueden requerir múltiples etapas de procesamiento usando distintas tecnologías, e incluso ejecutándose en tiempo real. Por otra parte, para desplegar estas aplicaciones, los clusters ‘commodity’ se han reemplazado en algunos casos por paradigmas más flexibles como el Cloud, o incluso por otros emergentes como la computación ‘serverless’, requiriendo ambos paradigmas de tecnologías de virtualización. Esta Tesis propone dos entornos que proporcionan formas alternativas de realizar un análisis en profundidad y una mejor gestión de los recursos de aplicaciones Big Data desplegadas en entornos virtuales basados en contenedores software. Por un lado, el entorno BDWatchdog permite realizar un análisis de grano fino y en tiempo real en lo que respecta a la monitorización de los recursos del sistema y al perfilado del código. Por otro lado, se describe un entorno para el reescalado dinámico y en tiempo real de los recursos de acuerdo a un conjunto de políticas configurables. La primera política propuesta se centra en el reescalado automático de los recursos de los contenedores de acuerdo al uso real que las aplicaciones hacen de los mismos, proporcionando así un entorno ‘serverless’. Además, se presenta una política alternativa centrada en la gestión energética que permite implementar los conceptos de limitación y presupuesto de potencia, pudiendo aplicarse a contenedores, aplicaciones o incluso usuarios. En general, los entornos propuestos en esta Tesis tratan de resaltar el potencial de aplicar nuevas formas de analizar y ajustar los recursos de las aplicaciones Big Data desplegadas en clusters de contenedores, incluso en tiempo real. Los casos de uso que se han presentado son ejemplos de esto, demostrando que las aplicaciones Big Data pueden adaptarse a nuevas tecnologías o paradigmas sin tener que cambiar su características más intrínsecas.[Abstract] Current Big Data applications have significantly evolved from its origins, moving from mostly batch workloads to more complex ones that may involve many processing stages using different technologies or even working in real time. Moreover, to deploy these applications, commodity clusters have been in some cases replaced in favor of newer and more flexible paradigms such as the Cloud or even emerging ones such as serverless computing, usually involving virtualization techniques. This Thesis proposes two frameworks that provide alternative ways to perform indepth analysis and improved resource management for Big Data applications deployed on virtual environments based on software containers. On the one hand, the BDWatchdog framework is capable of performing real-time, fine-grain analysis in terms of system resource monitoring and code profiling. On the other hand, a framework for the dynamic and real-time scaling of resources according to several tuning policies is described. The first proposed policy revolves around the automatic scaling of the containers’ resources according to the real usage of the applications, thus providing a serverless environment. Furthermore, an alternative policy focused on energy management is presented in a scenario where power capping and budgeting functionalities are implemented for containers, applications or even users. Overall, the frameworks proposed in this Thesis aim to showcase how novel ways of analyzing and tuning the resources given to Big Data applications in container clusters are possible, even in real time. The supported use cases that were presented are examples of this, and show how Big Data applications can be adapted to newer technologies or paradigms without having to lose their distinctive characteristics

Vector coprocessor sharing techniques for multicores: performance and energy gains

Vector Processors (VPs) created the breakthroughs needed for the emergence of computational science many years ago. All commercial computing architectures on the market today contain some form of vector or SIMD processing. Many high-performance and embedded applications, often dealing with streams of data, cannot efficiently utilize dedicated vector processors for various reasons: limited percentage of sustained vector code due to substantial flow control; inherent small parallelism or the frequent involvement of operating system tasks; varying vector length across applications or within a single application; data dependencies within short sequences of instructions, a problem further exacerbated without loop unrolling or other compiler optimization techniques. Additionally, existing rigid SIMD architectures cannot tolerate efficiently dynamic application environments with many cores that may require the runtime adjustment of assigned vector resources in order to operate at desired energy/performance levels. To simultaneously alleviate these drawbacks of rigid lane-based VP architectures, while also releasing on-chip real estate for other important design choices, the first part of this research proposes three architectural contexts for the implementation of a shared vector coprocessor in multicore processors. Sharing an expensive resource among multiple cores increases the efficiency of the functional units and the overall system throughput. The second part of the dissertation regards the evaluation and characterization of the three proposed shared vector architectures from the performance and power perspectives on an FPGA (Field-Programmable Gate Array) prototype. The third part of this work introduces performance and power estimation models based on observations deduced from the experimental results. The results show the opportunity to adaptively adjust the number of vector lanes assigned to individual cores or processing threads in order to minimize various energy-performance metrics on modern vector- capable multicore processors that run applications with dynamic workloads. Therefore, the fourth part of this research focuses on the development of a fine-to-coarse grain power management technique and a relevant adaptive hardware/software infrastructure which dynamically adjusts the assigned VP resources (number of vector lanes) in order to minimize the energy consumption for applications with dynamic workloads. In order to remove the inherent limitations imposed by FPGA technologies, the fifth part of this work consists of implementing an ASIC (Application Specific Integrated Circuit) version of the shared VP towards precise performance-energy studies involving high- performance vector processing in multicore environments

Design of asynchronous microprocessor for power proportionality

PhD ThesisMicroprocessors continue to get exponentially cheaper for end users following Moore’s law, while the costs involved in their design keep growing, also at an exponential rate. The reason is the ever increasing complexity of processors, which modern EDA tools struggle to keep up with. This makes further scaling for performance subject to a high risk in the reliability of the system. To keep this risk low, yet improve the performance, CPU designers try to optimise various parts of the processor. Instruction Set Architecture (ISA) is a significant part of the whole processor design flow, whose optimal design for a particular combination of available hardware resources and software requirements is crucial for building processors with high performance and efficient energy utilisation. This is a challenging task involving a lot of heuristics and high-level design decisions. Another issue impacting CPU reliability is continuous scaling for power consumption. For the last decades CPU designers have been mainly focused on improving performance, but “keeping energy and power consumption in mind”. The consequence of this was a development of energy-efficient systems, where energy was considered as a resource whose consumption should be optimised. As CMOS technology was progressing, with feature size decreasing and power delivered to circuit components becoming less stable, the energy resource turned from an optimisation criterion into a constraint, sometimes a critical one. At this point power proportionality becomes one of the most important aspects in system design. Developing methods and techniques which will address the problem of designing a power-proportional microprocessor, capable to adapt to varying operating conditions (such as low or even unstable voltage levels) and application requirements in the runtime, is one of today’s grand challenges. In this thesis this challenge is addressed by proposing a new design flow for the development of an ISA for microprocessors, which can be altered to suit a particular hardware platform or a specific operating mode. This flow uses an expressive and powerful formalism for the specification of processor instruction sets called the Conditional Partial Order Graph (CPOG). The CPOG model captures large sets of behavioural scenarios for a microarchitectural level in a computationally efficient form amenable to formal transformations for synthesis, verification and automated derivation of asynchronous hardware for the CPU microcontrol. The feasibility of the methodology, novel design flow and a number of optimisation techniques was proven in a full size asynchronous Intel 8051 microprocessor and its demonstrator silicon. The chip showed the ability to work in a wide range of operating voltage and environmental conditions. Depending on application requirements and power budget our ASIC supports several operating modes: one optimised for energy consumption and the other one for performance. This was achieved by extending a traditional datapath structure with an auxiliary control layer for adaptable and fault tolerant operation. These and other optimisations resulted in a reconfigurable and adaptable implementation, which was proven by measurements, analysis and evaluation of the chip.EPSR

Designs for increasing reliability while reducing energy and increasing lifetime

In the last decades, the computing technology experienced tremendous developments. For instance, transistors' feature size shrank to half at every two years as consistently from the first time Moore stated his law. Consequently, number of transistors and core count per chip doubles at each generation. Similarly, petascale systems that have the capability of processing more than one billion calculation per second have been developed. As a matter of fact, exascale systems are predicted to be available at year 2020. However, these developments in computer systems face a reliability wall. For instance, transistor feature sizes are getting so small that it becomes easier for high-energy particles to temporarily flip the state of a memory cell from 1-to-0 or 0-to-1. Also, even if we assume that fault-rate per transistor stays constant with scaling, the increase in total transistor and core count per chip will significantly increase the number of faults for future desktop and exascale systems. Moreover, circuit ageing is exacerbated due to increased manufacturing variability and thermal stresses, therefore, lifetime of processor structures are becoming shorter. On the other side, due to the limited power budget of the computer systems such that mobile devices, it is attractive to scale down the voltage. However, when the voltage level scales to beyond the safe margin especially to the ultra-low level, the error rate increases drastically. Nevertheless, new memory technologies such as NAND flashes present only limited amount of nominal lifetime, and when they exceed this lifetime, they can not guarantee storing of the data correctly leading to data retention problems. Due to these issues, reliability became a first-class design constraint for contemporary computing in addition to power and performance. Moreover, reliability even plays increasingly important role when computer systems process sensitive and life-critical information such as health records, financial information, power regulation, transportation, etc. In this thesis, we present several different reliability designs for detecting and correcting errors occurring in processor pipelines, L1 caches and non-volatile NAND flash memories due to various reasons. We design reliability solutions in order to serve three main purposes. Our first goal is to improve the reliability of computer systems by detecting and correcting random and non-predictable errors such as bit flips or ageing errors. Second, we aim to reduce the energy consumption of the computer systems by allowing them to operate reliably at ultra-low voltage level. Third, we target to increase the lifetime of new memory technologies by implementing efficient and low-cost reliability schemes