Polynomial Fuzzy Observer-Based Feedback Control for Nonlinear Hyperbolic PDEs Systems

This article explores the observer-based feedback control problem for a nonlinear hyperbolic partial differential equations (PDEs) system. Initially, the polynomial fuzzy hyperbolic PDEs (PFHPDEs) model is established through the utilization of the fuzzy identification approach, derived from the nonlinear hyperbolic PDEs model. Various types of state estimation and controller design problems for the polynomial fuzzy PDEs system are discussed concerning the state estimation problem. To investigate the relaxed stability problem, Euler’s homogeneous theorem, Lyapunov–Krasovskii functional with polynomial matrices (LKFPM), and the sum-of-squares (SOSs) approach are adopted. The exponential stabilization condition is formulated in terms of the spatial-derivative-SOSs (SD-SOSs). Additionally, a segmental algorithm is developed to find the feasible solution for the SD-SOS condition. Finally, a hyperbolic PDEs system and several numerical examples are provided to illustrate the validity and effectiveness of the proposed results

Robust Adaptive Control of an Offshore Ocean Thermal Energy Conversion System

IEEE Boundary control strategy is developed to analyze the vibration problem of the offshore ocean thermal energy conversion (OTEC) system as well as to constrain the bottom tension and top motion. To provide an accurate dynamic behavior for the OTEC system, this distributed parameter system is modeled and formulated with a governing equation and boundary conditions (PDE-ODEs model). Two robust adaptive boundary controllers are designed and disposed at the endpoints of the system, and the stability of the controlled system under unknown disturbances is achieved. After selecting the relevant parameters appropriately, the offset of the offshore OTEC system can be suppressed to equilibrium position. Finally, the effectiveness of the proposed control is illustrated by simulation

A CENTER MANIFOLD THEORY-BASED APPROACH TO THE STABILITY ANALYSIS OF STATE FEEDBACK TAKAGI-SUGENO-KANG FUZZY CONTROL SYSTEMS

The aim of this paper is to propose a stability analysis approach based on the application of the center manifold theory and applied to state feedback Takagi-Sugeno-Kang fuzzy control systems. The approach is built upon a similar approach developed for Mamdani fuzzy controllers. It starts with a linearized mathematical model of the process that is accepted to belong to the family of single input second-order nonlinear systems which are linear with respect to the control signal. In addition, smooth right-hand terms of the state-space equations that model the processes are assumed. The paper includes the validation of the approach by application to stable state feedback Takagi-Sugeno-Kang fuzzy control system for the position control of an electro-hydraulic servo-system

Modeling and Estimation of Thermal Flows Based on Transport and Balance Equations

Heat transfer in counterflow heat exchangers is modeled by using transport and balance equations with the temperatures of cold fluid, hot fluid, and metal pipe as state variables distributed along the entire pipe length. Using such models, boundary value problems can be solved to estimate the temperatures over all the length by means of measurements taken only at the boundaries. Conditions for the stability of the estimation error given by the difference between the temperatures and their estimates are established by using a Lyapunov approach. Toward this end, a method to construct nonlinear Lyapunov functionals is addressed by relying on a polynomial diagonal structure. This stability analysis is extended in case of the presence of bounded modeling uncertainty. The theoretical findings are illustrated with numerical results, which show the effectiveness of the proposed approach

Robust Control

The need to be tolerant to changes in the control systems or in the operational environment of systems subject to unknown disturbances has generated new control methods that are able to deal with the non-parametrized disturbances of systems, without adapting itself to the system uncertainty but rather providing stability in the presence of errors bound in a model. With this approach in mind and with the intention to exemplify robust control applications, this book includes selected chapters that describe models of H-infinity loop, robust stability and uncertainty, among others. Each robust control method and model discussed in this book is illustrated by a relevant example that serves as an overview of the theoretical and practical method in robust control

Lithium-Ion battery SOC estimation

Lithium-ion batteries are frequently used in Hybrid electric vehicles (HEVs), which are taking the place of gas-engine vehicles. An important but not measurable quantity in HEVs is the amount of charge remaining in the battery in a drive cycle. The remaining charge is normally identified by a variable called state of charge (SOC). A potential way of estimating the SOC is relating this variable with the state of a dynamical system. Afterwards, the SOC can be estimated through an observer design. As a precise model, electrochemical equations are chosen in this research to estimate the SOC. The first part of this thesis considers comparison studies of commonly-used finite-dimensional estimation methods for different distributed parameter systems (DPSs). In this part, the system is first approximated by a finite-dimensional representation; the observer dynamics is a copy of the finite-dimensional representation and a filtering gain obtained through observer design. The main outcome of these studies is comparing the performance of different observers in the state estimation of different types of DPSs after truncation. The studies are then expanded to investigate the effect of the truncated model by increasing the order of finite-dimensional approximation of the system numerically. The simulation results are also compared to the mathematical properties of the systems. A modified sliding mode observer is improved next to take care of the system's nonlinearity and compensate for the estimation error due to disturbances coming from an external input. It is proved that the modified SMO provides an exponential convergence of the estimation error in the existence of an external input. In most cases, the simulations results of the comparison studies indicate the improved performance of the modified SMO observer. Approximation and well-posedness of two general classes of nonlinear DPSs are studied next. The main concern of these studies is to produce a low-order model which converges to the original equation as the order of approximation increases. The available results in the literature are limited to specified classes of systems. These classes do not cover the lithium-ion cell model; however, the general forms presented here include the electrochemical equations as a specific version. In order to facilitate the electrochemical model for observer design, simplification of the model is considered in the next step. The original electrochemical equations are composed of both dynamical and constraint equations. They are simplified such that a fully dynamical representation can be derived. The fully dynamical representation is beneficial for real-time application since it does not require solving the constraint equation at every time iteration while solving the dynamical equations. Next, the electrochemical equations can be transformed into the general state space form studied in this thesis. Finally, an adaptive EKF observer is designed via the low-order model for SOC estimation. The electrochemical model employed here is a variable solid-state diffusivity model. Compared to other models, the variable solid-state diffusivity model is more accurate for cells with Lithium ion phosphate positive electrode, which are considered here, than others. The adaptive observer is constructed based on considering an adaptive model for the open circuit potential term in the electrochemical equations. The parameters of this model are identified simultaneously with the state estimation. Compared to the experimental data, simulation results show the efficiency of the designed observer in the existence of modeling inaccuracy

Controllers, observers, and applications thereof

Controller scaling and parameterization are described. Techniques that can be improved by employing the scaling and parameterization include, but are not limited to, controller design, tuning and optimization. The scaling and parameterization methods described here apply to transfer function based controllers, including PID controllers. The parameterization methods also apply to state feedback and state observer based controllers, as well as linear active disturbance rejection (ADRC) controllers. Parameterization simplifies the use of ADRC. A discrete extended state observer (DESO) and a generalized extended state observer (GESO) are described. They improve the performance of the ESO and therefore ADRC. A tracking control algorithm is also described that improves the performance of the ADRC controller. A general algorithm is described for applying ADRC to multi-input multi-output systems. Several specific applications of the control systems and processes are disclosed