Change blindness: eradication of gestalt strategies

Arrays of eight, texture-defined rectangles were used as stimuli in a one-shot change blindness (CB) task where there was a 50% chance that one rectangle would change orientation between two successive presentations separated by an interval. CB was eliminated by cueing the target rectangle in the first stimulus, reduced by cueing in the interval and unaffected by cueing in the second presentation. This supports the idea that a representation was formed that persisted through the interval before being 'overwritten' by the second presentation (Landman et al, 2003 Vision Research 43149–164]. Another possibility is that participants used some kind of grouping or Gestalt strategy. To test this we changed the spatial position of the rectangles in the second presentation by shifting them along imaginary spokes (by ±1 degree) emanating from the central fixation point. There was no significant difference seen in performance between this and the standard task [F(1,4)=2.565, p=0.185]. This may suggest two things: (i) Gestalt grouping is not used as a strategy in these tasks, and (ii) it gives further weight to the argument that objects may be stored and retrieved from a pre-attentional store during this task

The low-level guidance of an experimental autonomous vehicle

This thesis describes the data processing and the control that constitutes a method of guidance for an autonomous guided vehicle (AGV) operating in a predefined and structured environment such as a warehouse or factory. A simple battery driven vehicle has been constructed which houses an MC68000 based microcomputer and a number of electronic interface cards. In order to provide a user interface, and in order to integrate the various aspects of the proposed guidance method, a modular software package has been developed. This, along with the research vehicle, has been used to support an experimental approach to the research. The vehicle's guidance method requires a series of concatenated curved and straight imaginary Unes to be passed to the vehicle as a representation of a planned path within its environment. Global position specifications for each line and the associated AGV direction and demand speed for each fine constitute commands which are queued and executed in sequence. In order to execute commands, the AGV is equipped with low level sensors (ultrasonic transducers and optical shaft encoders) which allow it to estimate and correct its global position continually. In addition to a queue of commands, the AGV also has a pre-programmed knowledge of the position of a number of correction boards within its environment. These are simply wooden boards approximately 25cm high and between 2 and 5 metres long with small protrusions ("notches") 4cm deep and 10cm long at regular (Im) intervals along its length. When the AGV passes such a correction board, it can measure its perpendicular distance and orientation relative to that board using two sets of its ultrasonic sensors, one set at the rear of the vehicle near to the drive wheels and one set at the front of the vehicle. Data collected as the vehicle moves parallel to a correction board is digitally filtered and subsequently a least squares line fitting procedure is adopted. As well as improving the reliability and accuracy of orientation and distance measurements relative to the board, this provides the basis for an algorithm with which to detect and measure the position of the protrusions on the correction board. Since measurements in three planar, local coordinates can be made (these are: x, the distance travelled parallel to a correction board; and y,the perpendicular distance relative to a correction board; and Ɵ, the clockwise planar orientation relative to the correction board), global position estimation can be corrected. When position corrections are made, it can be seen that they appear as step disturbances to the control system. This control system has been designed to allow the vehicle to move back onto its imaginary line after a position correction in a critically damped fashion and, in the steady state, to track both linear and curved command segments with minimum error

Fusion of Data from Heterogeneous Sensors with Distributed Fields of View and Situation Evaluation for Advanced Driver Assistance Systems

In order to develop a driver assistance system for pedestrian protection, pedestrians in the environment of a truck are detected by radars and a camera and are tracked across distributed fields of view using a Joint Integrated Probabilistic Data Association filter. A robust approach for prediction of the system vehicles trajectory is presented. It serves the computation of a probabilistic collision risk based on reachable sets where different sources of uncertainty are taken into account

Third International Symposium on Artificial Intelligence, Robotics, and Automation for Space 1994

The Third International Symposium on Artificial Intelligence, Robotics, and Automation for Space (i-SAIRAS 94), held October 18-20, 1994, in Pasadena, California, was jointly sponsored by NASA, ESA, and Japan's National Space Development Agency, and was hosted by the Jet Propulsion Laboratory (JPL) of the California Institute of Technology. i-SAIRAS 94 featured presentations covering a variety of technical and programmatic topics, ranging from underlying basic technology to specific applications of artificial intelligence and robotics to space missions. i-SAIRAS 94 featured a special workshop on planning and scheduling and provided scientists, engineers, and managers with the opportunity to exchange theoretical ideas, practical results, and program plans in such areas as space mission control, space vehicle processing, data analysis, autonomous spacecraft, space robots and rovers, satellite servicing, and intelligent instruments

Mechatronic Systems

Mechatronics, the synergistic blend of mechanics, electronics, and computer science, has evolved over the past twenty five years, leading to a novel stage of engineering design. By integrating the best design practices with the most advanced technologies, mechatronics aims at realizing high-quality products, guaranteeing at the same time a substantial reduction of time and costs of manufacturing. Mechatronic systems are manifold and range from machine components, motion generators, and power producing machines to more complex devices, such as robotic systems and transportation vehicles. With its twenty chapters, which collect contributions from many researchers worldwide, this book provides an excellent survey of recent work in the field of mechatronics with applications in various fields, like robotics, medical and assistive technology, human-machine interaction, unmanned vehicles, manufacturing, and education. We would like to thank all the authors who have invested a great deal of time to write such interesting chapters, which we are sure will be valuable to the readers. Chapters 1 to 6 deal with applications of mechatronics for the development of robotic systems. Medical and assistive technologies and human-machine interaction systems are the topic of chapters 7 to 13.Chapters 14 and 15 concern mechatronic systems for autonomous vehicles. Chapters 16-19 deal with mechatronics in manufacturing contexts. Chapter 20 concludes the book, describing a method for the installation of mechatronics education in schools

Intelligent Transportation Related Complex Systems and Sensors

Building around innovative services related to different modes of transport and traffic management, intelligent transport systems (ITS) are being widely adopted worldwide to improve the efficiency and safety of the transportation system. They enable users to be better informed and make safer, more coordinated, and smarter decisions on the use of transport networks. Current ITSs are complex systems, made up of several components/sub-systems characterized by time-dependent interactions among themselves. Some examples of these transportation-related complex systems include: road traffic sensors, autonomous/automated cars, smart cities, smart sensors, virtual sensors, traffic control systems, smart roads, logistics systems, smart mobility systems, and many others that are emerging from niche areas. The efficient operation of these complex systems requires: i) efficient solutions to the issues of sensors/actuators used to capture and control the physical parameters of these systems, as well as the quality of data collected from these systems; ii) tackling complexities using simulations and analytical modelling techniques; and iii) applying optimization techniques to improve the performance of these systems. It includes twenty-four papers, which cover scientific concepts, frameworks, architectures and various other ideas on analytics, trends and applications of transportation-related data

Modeling and Simulation in Engineering

This book provides an open platform to establish and share knowledge developed by scholars, scientists, and engineers from all over the world, about various applications of the modeling and simulation in the design process of products, in various engineering fields. The book consists of 12 chapters arranged in two sections (3D Modeling and Virtual Prototyping), reflecting the multidimensionality of applications related to modeling and simulation. Some of the most recent modeling and simulation techniques, as well as some of the most accurate and sophisticated software in treating complex systems, are applied. All the original contributions in this book are jointed by the basic principle of a successful modeling and simulation process: as complex as necessary, and as simple as possible. The idea is to manipulate the simplifying assumptions in a way that reduces the complexity of the model (in order to make a real-time simulation), but without altering the precision of the results