An introduction to the interim digital SAR processor and the characteristics of the associated Seasat SAR imagery

Basic engineering data regarding the Interim Digital SAR Processor (IDP) and the digitally correlated Seasat synthetic aperature radar (SAR) imagery are presented. The correlation function and IDP hardware/software configuration are described, and a preliminary performance assessment presented. The geometric and radiometric characteristics, with special emphasis on those peculiar to the IDP produced imagery, are described

Highly Resolved Synthetic Aperture Radar with Beam Steering

The present work deals with a highly resolved radar with a synthetic aperture (synthetic aperture radar - SAR), which uses a beam steering to improve performance. The first part of this work deals with the influence of various effects occurring in the hardware of the High-Resolution Wide-Swath SAR (HRWS SAR) system. A special focus was set to single bit quantization in multi-channel receiver. The second part of this work describes SAR processors for Sliding Spotlight mode

Highly Resolved Synthetic Aperture Radar with Beam Steering

Diese Arbeit beschäftigt sich mit einem hochauflösenden Radar mit synthetischer Apertur. Der erste Teil dieser Arbeit beschreibt mögliche Auswirkungen verschiedener Effekte in dem Empfänger des High-Resolution Wide-Swath SAR (HRWS SAR) Systems. Darüber hinaus wird ein Konzept zu Reduktion von Quantisierungsbits in Systemen mit mehreren Empfangskanälen untersucht. Der zweite Teil der Arbeit betrifft die Datenverarbeitung eines hochauflösenden SAR-Systems in Sliding Spotlight Mode

Characterization of the head-related transfer function using chirp and maximum length sequence excitation signals

Both chirp (or sweep) and maximum length sequence (MLS) excitation signals are used to obtain measurements of the head-related transfer function (HRTF) for the Knowles electronic manikin for acoustic research (KEMAR), resulting in remarkably low relative error between the two measurement methods. Due to the low relative error, it is asserted that applying both methods in experiments involving system characterization can be used to confirm the accuracy of individual measurements and reduce the likelihood that erroneous measurements go unnoticed. An MLS burst-augmented excitation signal is presented to compensate for unpredictable delay added in sound-acquisition software that lacks the capability of synchronized record/playback. The HRTF measurements obtained with an external probe microphone are compared with those obtained with the standard in-ear microphones that the KEMAR is equipped with, to reveal that care should be taken to select a probe microphone that has a low susceptibility to multipath interference. An experiment is performed to investigate the feasibility of using two pre-filtered chirp responses to obtain the relative transfer function between the two locations of measurement

Digital Signal Processing Techniques Applied to Radio over Fiber Systems

The dissertation aims to analyze different Radio over Fiber systems for the front-haul applications. Particularly, analog radio over fiber (A-RoF) are simplest and suffer from nonlinearities, therefore, mitigating such nonlinearities through digital predistortion are studied. In particular for the long haul A-RoF links, direct digital predistortion technique (DPDT) is proposed which can be applied to reduce the impairments of A-RoF systems due to the combined effects of frequency chirp of the laser source and chromatic dispersion of the optical channel. Then, indirect learning architecture (ILA) based structures namely memory polynomial (MP), generalized memory polynomial (GMP) and decomposed vector rotation (DVR) models are employed to perform adaptive digital predistortion with low complexities. Distributed feedback (DFB) laser and vertical capacity surface emitting lasers (VCSELs) in combination with single mode/multi-mode fibers have been linearized with different quadrature amplitude modulation (QAM) formats for single and multichannel cases. Finally, a feedback adaptive DPD compensation is proposed. Then, there is still a possibility to exploit the other realizations of RoF namely digital radio over fiber (D-RoF) system where signal is digitized and transmits the digitized bit streams via digital optical communication links. The proposed solution is robust and immune to nonlinearities up-to 70 km of link length. Lastly, in light of disadvantages coming from A-RoF and D-RoF, it is still possible to take only the advantages from both methods and implement a more recent form knows as Sigma Delta Radio over Fiber (S-DRoF) system. Second Order Sigma Delta Modulator and Multi-stAge-noise-SHaping (MASH) based Sigma Delta Modulator are proposed. The workbench has been evaluated for 20 MHz LTE signal with 256 QAM modulation. Finally, The 6x2 GSa/s sigma delta modulators are realized on FPGA to show a real time demonstration of S-DRoF system. The demonstration shows that S-DRoF is a competitive competitor for 5G sub-6GHz band applications

Integrated Bragg gratings in silicon-on-insulator

Dans la littérature, les réseaux de Bragg intégrés sur silicium sont relativement simples par rapport à leurs contreparties fibrées. Cependant, la fabrication de réseaux plus élaborés permettrait d’améliorer la capacité de traitement du signal des circuits sur silicium. Cette thèse s’attarde donc aux difficultés encourues lors de la conception, de la fabrication et de la caractérisation de réseaux de Bragg sur silicium ayant une réponse spectrale élaborée. Tout d'abord, afin de caractériser la réponse spectrale complexe des réseaux, l’utilisation de filtrage temporel est proposée afin de supprimer les réflexions parasites. Cela a permis d’utiliser des algorithmes de reconstruction fournissant une caractérisation complète de ces structures. De plus, l’ajout d’un filtrage des hautes fréquences spatiales a permis de réduire considérablement le bruit des mesures. Par la suite, les principales sources de distorsions de la réponse spectrale des réseaux ont été identifiées, soit la rugosité des guides et la variation de leur épaisseur. L’impact de ces phénomènes a été étudié numériquement et analytiquement et, pour la première fois, la longueur de corrélation de ces sources de bruit a été caractérisée expérimentalement sur une longueur suffisante. Finalement, deux techniques permettant de diminuer l’impact de ces phénomènes ont été proposées, ce qui a permis de fabriquer les réseaux de Bragg sur silicium ayant la plus petite largeur de bande publiée à ce jour. Également, nous avons fait les premières démonstrations d’apodisation de réseaux de Bragg utilisant uniquement la phase de ces derniers (c.-à-d. apodisation en phase et par superposition). Contrairement aux techniques déjà proposées, ces dernières ont l'avantage de ne pas introduire de distorsions de l'indice effectif, ils sont plus robuste aux erreurs de fabrication et sont compatibles avec l’apodisation de réseaux à corrugations de très petites amplitudes. Finalement, afin d'augmenter la longueur des réseaux tout en gardant leur dimension compatible avec la taille des puces de silicium, les réseaux ont été courbés en forme de spirale compacte. Pour ce faire, la période des réseaux a été modifiée afin de compenser l'effet de la courbure sur l'indice effectif. Ainsi, nous avons démontré que des réseaux de 2 mm de long pouvaient être intégrés sur une surface de 200 µm x 190 µm sans ajout de dégradation spectrale et, surtout, sans restriction sur la structure du design. Ces résultats sont significatifs, car un contrôle précis de la phase et de l’amplitude des réseaux combinés avec la capacité de fabriquer de réseaux longs sont nécessaire afin de réaliser des filtres optiques intégrés avec des réponses spectrales élaborées. Ainsi, le travail présenté dans cette thèse ouvre la porte à de nouveaux designs à base de réseaux de Bragg.In the literature, integrated Bragg gratings in Silicon-on-Insulator are relatively simple compared to their fibre Bragg grating counterpart. However, elaborate gratings could improve the signal processing capability of the silicon platform. Thus, this thesis addresses the issues that prevent the design, the fabrication and the characterization of Bragg gratings having elaborate spectral response in the silicon platform. Firstly, in order to precisely characterize Bragg gratings complex spectral response, we proposed to suppress parasitic reflections using temporal filtering. The results obtained with measurement technique, when used with an integral layer peeling algorithm, allowed us to retrieve the amplitude and phase profiles of the grating thus providing a complete characterization of the structure. Moreover, the addition of a low-pass spatial filter allowed improving the characterization process by reducing the measurement noise. Secondly, the main sources of distortion of Bragg gratings spectral response have been identified to be the sidewall roughness and the wafer height fluctuation. An exhaustive study of the impact of these phenomena has been done both numerically and analytically. Furthermore, for the first time, the autocorrelation of these noise sources has been characterized experimentally on a sufficient length. Finally, improvements in the waveguide designs have reduced significantly these effects which allowed the fabrication of Bragg gratings in silicon with the smallest bandwidth published to date. Thirdly, the first demonstration of apodized Bragg gratings using only phase modulation of the structure has been done (i.e. phase apodisation and superposition apodisation). Unlike already published techniques, the later ones have the advantage to be robust to deep-UV lithography and fabrication errors. Furthermore, they do no introduce distortions into the grating phase profile and they are compatible with gratings having small recesses. Finally, in order to increase the grating length while keeping their dimension compatible with the silicon chip size, we proposed to bend them in a compact spiral shape. To do this properly, the curvature impact on the effective index has been modeled and compensated successfully by modifying the grating period. Thus, we have shown that 2 mm long gratings can be integrated on a surface of 200 µm x 190 µm without the addition of spectral degradation and without restrictions on the design structure. These results are of importance because longer grating structures with weaker coupling coefficients and a precise control both on its phase and amplitude are required in order to achieve integrated optical filters with elaborate spectral responses. Thus, we believe that the work presented in this thesis open the door to many new grating-based optical filter designs compatible with integrated optics technologies

Terahertz bandwidth RF spectrum analysis of femtosecond pulses using a chalcogenide chip

We report the first demonstration of the use of an RF spectrum analyser with multi-terahertz bandwidth to measure the properties of femtosecond optical pulses. A low distortion and broad measurement bandwidth of 2.78 THz (nearly two orders of magnitude greater than conventional opto-electronic analyzers) was achieved by using a 6 cm long As2S3 chalcogenide waveguide designed for high Kerr nonlinearity and near zero dispersion. Measurements of pulses as short as 260 fs produced from a soliton-effect compressor reveal features not evident from the pulse’s optical spectrum. We also applied an inverse Fourier transform numerically to the captured data to re-construct a time-domain waveform that resembled pulse measurement obtained from intensity autocorrelation