Chipless-RFID : a review and recent developments

In this paper, a review of the state-of-the-art chipless radiofrequency identification (RFID) technology is carried out. This recent technology may provide low cost tags as long as these tags are not equipped with application specific integrated circuits (ASICs). Nevertheless, chipless-RFID presents a series of technological challenges that have been addressed by different research groups in the last decade. One of these challenges is to increase the data storage capacity of tags, in order to be competitive with optical barcodes, or even with chip-based RFID tags. Thus, the main aim of this paper is to properly clarify the advantages and disadvantages of chipless-RFID technology. Moreover, since the coding information is an important aspect in such technology, the di_erent coding techniques, as well as the main figures of merit used to compare di_erent chipless-RFID tags, will be analyzed

Novel Butterfly Slot Based Chipless RFID Tag

A compact chipless RFID tag with robust readable features is presented in this paper. The tag is made up of novel concentric butterfly slot resonators. Bit data is encoded in the frequency signature of the tag. Each slot corresponds to a resonance peak representing a bit '1', whereas an absence of the peak signifies a bit '0'. Proposed resonator design demonstrates insensitivity to different polarization and incident angles of the linearly polarized impinging electromagnetic wave. The tag operates in the frequency band of 4.7-9.7 GHz, limited within the license free ultra wide-band. Rogers RT/duroid (R) 5880 substrate is used to realize a 10-bit capacity design that spans 14 x 14 mm(2) resulting in a bit density of 5.1 bits/cm(2)

Microwave encoders for chipless RFID and angular velocity sensors based on S-shaped split ring resonators

In this paper, it is demonstrated that a chain of S-shaped split ring resonators (S-SRRs) etched on a dielectric substrate can modulate the amplitude of a carrier signal injected to a transmission line (a coplanar waveguide (CPW). To this end, the S-SRR chain must be transversally displaced above the CPW, in close proximity to it. By this means, the transmission coefficient of the line is modulated by the time-varying electromagnetic (inductive) coupling between the line and the S-SRRs of the chain, related to their relative motion. Based on this principle, two different applications can be envisaged: 1) angular velocity sensors and 2) near-field chipless radiofrequency identification (chipless-RFID) tags. In the former application, the S-SRR chain is circularly shaped and the S-SRRs are distributed uniformly along the perimeter of the rotor, at equidistant positions. By this means, the amplitude-modulated signal generated by rotor motion exhibits envelope peaks, whose distance is related to the angular velocity of the rotor. In the use of S-SRRs as microwave encoders for chipless RFID tags, not all the S-SRRs of the chain are present. Their presence or absence at the predefined (equidistant) positions is related to the logic state "1" or "0." Tag reading is sequential, and it is achieved through tag motion (at constant velocity) above the reader, a CPW transmission line fed by a carrier signal. The ID code is contained in the envelope function of the resulting amplitude modulated signal, which can be obtained by means of an envelope detector. With the proposed approach, a high number of pulses in angular velocity sensors can be achieved (with direct impact on angle resolution and sensitivity to changes in instantaneous rotation speed). Moreover, chipless-RFID tags with unprecedented number of bits can be obtained. The proposed angular velocity sensors can be useful in space environments, whereas the chipless-RFID systems based on the proposed tags are useful in applications where reading range can be sacrificed in favor of high data capacity (large number of bits), e.g., security and authentication

Chipless RFID sensor tag system with microstrip transmissionline based ID generation schemes

This dissertation presents a chipless radio frequency identification (RFID) sensor tag system consisting of passive chipless RFID sensor tags and specialized reader. The chipless sensor tags are fabricated on a flexible substrate and contain an ID generation circuit, a sensor, and a microstrip antenna. The ID generation circuit consists of meandered microstrip transmission lines and uses a novel reflection and delay based ID generation scheme. The scheme, using an input RF pulse, constructs an on-off keying (OOK) or pulse position modulated (PPM) signal pattern representing a unique ID code. Two transmission lines and OOK representation are used and the generation of ten different ID codes are demonstrated. The integrated ID generation circuit, sensor, and antenna use a single transmission line and PPM representation, and demonstrate the generation of eight different ID codes. However, the presented schemes allow the generation of higher combinations of bits. A practical method to measure radar cross section (RCS) parameters of antennas that provides complete and more accurate information on scattering properties of antennas, essential for chipless sensor tag design, is presented. The new method uses minimum mean square error estimation solution of a derived received backscattered signal power equation and provides load independent structural-mode RCS, antenna-mode RCS, and relative phase factor of the measured antenna. Two configurations of the chipless sensor tags configuration-I (conf-I) and configuration-II (conf-II) are presented. In conf-I tags, sensors are connected as a load to the antenna and the sensor information is amplitude modulated in the backscattered signal. The testing with conf-I temperature sensor tag resulted in a 28% amplitude change when the temperature at the tag changes from 27°C to 140°C. In conf-II tags, sensors are connected as load to the ID generation circuit and the sensor information is phase modulated in the antenna-mode scattered signal. With the conf-II ethylene sensor tag, a phase change of 33° is observed when the ethylene concentration at the tag changes from 0 to 100 ppm. The specialized reader system is comprised of an analog reader that wirelessly communicates with the sensor tags and a single board computer that computes the sensor information from the received signal. The reader system constructs a 96 bit serialized global trade item number (SGTIN-96) electronic product code (EPC) format unique RFID tag data frame, including 16 bit sensor information, and makes the information available on a secure web interface accessible from cyberspace. The presented sensor tag system has the advantages of passive and chipless sensor tag operation, while offering a wide range of sensors types for integration. Moreover, it offers a viable alternative solution to existing active as well as passive RFID sensor tag systems (eg. SAW based RFID sensor tag systems)

Application of Ultra-Wideband Technology to RFID and Wireless Sensors

Aquesta Tesi Doctoral estudia l'ús de tecnologia de ràdio banda ultraampla (UWB) per sistemes de identificació per radiofreqüència (RFID) i sensors sense fils. Les xarxes de sensors sense fils (WSNs), ciutats i llars intel•ligents, i, en general, l'Internet de les coses (IoT) requereixen interfícies de ràdio simples i de baix consum i cost per un número molt ampli de sensors disseminats. UWB en el domini temporal es proposa aquí com una tecnologia de radio habilitant per aquestes aplicacions. Un model circuital s'estudia per RFID d'UWB codificat en el temps. Es proposen lectors basats en ràdars polsats comercials amb tècniques de processat de senyal. Tags RFID sense xip (chipless) codificats en el temps son dissenyats i caracterizats en termes de número d'identificacions possible, distància màxima de lectura, polarització, influència de materials adherits, comportament angular i corbatura del tag. Es proposen sensors chipless de temperatura i composició de ciment (mitjançant detecció de permitivitat). Dos plataformes semipassives codificades en temps (amb un enllaç paral•lel de banda estreta per despertar el sensor i estalviar energia) es proposen com solucions més complexes i robustes, amb una distància de lectura major. Es dissenya un sensor de temperatura (alimentat per energia solar) i un sensor de diòxid de nitrogen (mitjançant nanotubs de carboni i alimentat per una petita bateria), ambdòs semipassius amb circuiteria analògica. Es dissenya un multi-sensor semipassiu capaç de mesurar temperatura, humitat, pressió i acceleració, fent servir un microcontrolador de baix consum digital. Combinant els tags RFID UWB codificats en temps amb tecnologia de ràdar de penetració del terra (GPR), es deriva una aplicació per localització en interiors amb terra intel•ligent. Finalment, dos sistemes actius RFID UWB codificats en el temps s'estudien per aplicacions de localització de molt llarg abast.Esta Tesis Doctoral estudia el uso de tecnología de radio de banda ultraancha (UWB) para sistemas de identificación por radiofrecuencia (RFID) y sensores inalámbricos. Las redes de sensores inalámbricas (WSNs), ciudades y casas inteligentes, y, en general, el Internet de las cosas (IoT) requieren de interfaces de radio simples y de bajo consumo y coste para un número muy amplio de sensores diseminados. UWB en el dominio temporal se propone aquí como una tecnología de radio habilitante para dichas aplicaciones. Un modelo circuital se estudia para RFID de UWB codificado en tiempo. Configuraciones de lector, basadas en rádar pulsados comerciales, son propuestas, además de técnicas de procesado de señal. Tags RFID sin chip (chipless) codificados en tiempo son diseñados y caracterizados en términos de número de identificaciones posible, distancia máxima de lectura, polarización, influencia de materiales adheridos, comportamiento angular y curvatura del tag. Se proponen sensores chipless de temperatura y composición de cemento (mediante detección de permitividad). Dos plataformas semipasivas codificadas en tiempo (con un enlace paralelo de banda estrecha para despertar el sensor y ahorrar energía) se proponen como soluciones más complejas y robustas, con una distancia de lectura mayor. Se diseña un sensor de temperatura (alimentado por energía solar) y un sensor de dióxido de nitrógeno (mediante nanotubos de carbono y alimentado por una batería pequeña), ambos semipasivos con circuitería analógica. Se diseña un multi-sensor semipasivo capaz de medir temperatura, humedad, presión y aceleración, usando un microcontrolador digital de bajo consumo. Combinando los tags RFID UWB codificados en tiempo y tecnología de radar de penetración de suelo (GPR), se deriva una aplicación para localización en interiores con suelo inteligente. Finalmente, dos sistemas activos RFID UWB codificados en tiempo se estudian para aplicaciones de localización de muy largo alcance.This Doctoral Thesis studies the use of ultra-wideband (UWB) radio technology for radio-frequency identification (RFID) and wireless sensors. Wireless sensor networks (WSNs) for smart cities, smart homes and, in general, Internet of Things (IoT) applications require low-power, low-cost and simple radio interfaces for an expected very large number of scattered sensors. UWB in time domain is proposed here as an enabling radio technology. A circuit model is studied for time-coded UWB RFID. Reader setups based on commercial impulse radars are proposed, in addition to signal processing techniques. Chipless time-coded RFID tags are designed and characterized in terms of number of possible IDs, maximum reading distance, polarization, influence of attached materials, angular behaviour and bending. Chipless wireless temperature sensors and chipless concrete composition sensors (enabled by permittivity sensing) are proposed. Two semi-passive time-coded RFID sensing platforms are proposed as more complex, more robust, and longer read-range solutions. A wake-up link is used to save energy when the sensor is not being read. A semi-passive wireless temperature sensor (powered by solar energy) and a wireless nitrogen dioxide sensor (enabled with carbon nanotubes and powered by a small battery) are developed, using analog circuitry. A semi-passive multi-sensor tag capable of measuring temperature, humidity, pressure and acceleration is proposed, using a digital low-power microcontroller. Combining time-coded UWB RFID tags and ground penetrating radar, a smart floor application for indoor localization is derived. Finally, as another approach, two active time-coded RFID systems are developed for very long-range applications

Conception de tags d'identification sans puce dans le domaineTHz

This thesis work deals with the development of a new generation of low-cost Chipless tags operating in the THz frequency domain, it has been supported by the french national agency for research (ANR-09-VERS-013 « THID » ). It covers a wide area of applications such as the identification and/or unitary authentication of commercial items, identity papers, access control…To manufacture these tags, we proposed to use a periodic stack of dielectric material layers with different refractive index and whose thickness is of the order of the wavelength, commonly known as a one dimensional photonic crystal. The electromagnetic signature of such a structure exhibits photonic bandgaps (PBG), i.e. frequency windows in which light propagation is prohibited. We suggested modifying the periodicity of the crystal to create defect levels (peaks) for example in the 1st PBG to encode binary information. This particular structure allows to precisely tuned an electromagnetic signature. To ensure a mass and cost effective industrialization, we retained basic materials which are widely used in the pulp and paper industry: paper and polyethylene. The choice of these materials, which must combine high index contrast and low absorption, represents the first and a crucial step in this work. We characterize a wide range of materials using classical THz time domain spectroscopy (THz-TDS) and we propose two families of tags based on paper and polyethylene. Furthermore, we developed two methods to encode binary information, both based on the absence or presence of peaks in a PBG, peaks whose number and position depend on the introduced defects of periodicity. In a real identification test, a coding capacity of nearly 20-bit has been demonstrated. We also showed that the information contained in the electromagnetic response of these THz tags can be used for other applications related to the unitary authentication and by using the correlation coefficient as criterion for discrimination of the different signatures. Therefore, we evaluate the performance of an authentication test based on this criterion in various analysis domains: time, frequency and time-frequency. We showed that a study of the spectrogram (combining time and frequency representation) is much more relevant than a study in the only time or frequency domain.Ce travail de thèse a été réalisé dans le cadre d'un contrat avec l'ANR (ANR-09-VERS-013 « THID ») et porte sur le développement d'une nouvelle génération de tags Chipless à bas coûts fonctionnant dans le domaine THz, pour des applications d'identification et/ou authentification unitaire des articles commerciaux, des papiers d'identités, des personnes pour le contrôle d'accès... Les structures proposées, constituées d'un empilement périodique de couches diélectriques d'indices de réfraction différents, utilisent les propriétés particulières des cristaux photoniques 1D de présenter une réponse électromagnétique entrecoupée de bandes interdites photoniques (BIP). Toute perturbation de la périodicité de la structure engendre des pics dans les bandes interdites qui sont utilisés pour coder une information binaire. Cette structuration particulière des matériaux permet donc de manipuler précisément une signature électromagnétique. Pour des raisons liées à l'industrialisation (facilité de fabrication en masse) et aussi de coût, nous avons retenu des matériaux de base déjà couramment utilisés dans l'industrie papetière : le papier et le polyéthylène. Le choix de ces matériaux, qui doivent allier contraste d'indice élevé et faible absorption, représente une étape cruciale dans ce travail. Ainsi, à partir des résultats expérimentaux obtenus par spectroscopie THz dans le domaine temporel (THz-TDS) sur un grand nombre de matériaux, nous avons pu concevoir deux familles de tags sur la base de ces différents matériaux. Par ailleurs, nous avons développé deux méthodes de codage d'une information binaire, toutes deux basées sur l'absence ou la présence de pics dans une BIP, pics dont la position et le nombre dépendent bien évidemment des défauts de périodicité introduits. Pour des applications liées à l'identification, des capacités de codage de près de 20 bits ont été démontrées. Nous avons aussi montré que la richesse d'information contenue dans la réponse électromagnétique de ces Tags THz peut être utilisée pour les applications liées à l'authentification unitaire, en utilisant comme critère de discrimination le coefficient d'autocorrélation. Nous avons ainsi pu évaluer les performances d'un test d'authentification basé sur ce critère dans différents domaines d'analyse : temporel, fréquentiel et temps-fréquence. Nous avons montré qu'une étude du spectrogramme (combinant temps et fréquence) est ainsi bien plus pertinente qu'une étude dans les seuls domaines temporel ou fréquentiel

A Novel Long-Range Passive UHF RFID System over Twisted-pair Cable

Radio Frequency Identification (RFID) is one of the most representative, rapidly growing, and highly extendable technologies, which uses electromagnetic waves in accordance with specific communications standards and regulations to identify, track, or even localise desired objects. However, due to its high cost, limited read range, and uncertain reliability, its adoption still lags, especially in large-scale organisations. Even though an RFID distributed antenna system (DAS) can greatly improve the detection range and read rate of a single reader when system uses different combinations of antenna states with frequency and phase hopping, the lossy and heavy coaxial cables between reader and antennas still limits the system coverage and design flexibility for wide-area passive UHF RFID applications. In order to develop a cost-efficient and flexibly-installed passive RFID DAS, a novel large-range passive UHF RFID system over twisted-pair cable is proposed in this dissertation. This new system consists of one baseband central controller and one antenna subsystem, connected by a commonly used twisted-pair cable. It is shown that transmitting/receiving low frequency baseband signals over a twisted-pair cable can significantly reduce cable attenuation and extend the communication distance. A simulation is conducted to demonstrate that frequency and phase hopping can also be remotely controlled to fit this system structure by slightly varying the frequency or phase of the input reference signal of the frequency synthesis system. The features of twisted-pair cable in terms of its low cost, light weight, and bend radius greatly improve the design and installation flexibility of an RFID system. The implemented system is designed based on the ISO 18000-6C and EPC Class 1 Generation 2 standards, and can operate according to FCC (902-928 MHz) and ETSI (865-868MHz) regulations. The results of the measurement show the reader can achieve a sensitivity of - 94.5 dBm over 30 m Cat5e cable, and its sensitivity can still remain at around -94.2 dBm over 150 m Cat5e cable. The experimental results of tag detection show that the passive tags can be successfully detected over a 6 m wireless range following a 300 m of twisted-pair cable between the central controller and antenna. This detection range cannot be achieved by existing commercial RFID systems. Since the transmission and reception in a RFID system are simultaneous, finite isolation of the circulator/directional coupler and environmentally dependent reflection ratio of the antenna lead to serious leakage problems. Leakage can directly cause sensitivity degradation due to saturation of the RF components. A fast leakage suppression block is developed in efforts to solve this problem. Measurements show that this new canceller can deliver an average suppression of 36.9 dB, and this excellent performance remains when the system uses frequency hopping. With help of an improved scanning algorithm, this canceller can find its optimal status within 38 ms, and this settling time is short enough for most commercial RFID readers. By reducing the number of voltage samples taken, the convergence time can be further improved. To fully investigate this new passive UHF RFID system value, a comparison study between the new system and a commercial system is conducted. This new automatic passive UHF RFID system is confirmed to deliver high performance long-range passive tag detection. Particular advantages are shown in the fast tag read rate and capability of uplink SNR improvement. This novel system is also superior to conventional RFID systems in terms of link distance, link cost, and installation flexibility

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium