22 research outputs found
Recommended from our members
Design, Modelling and Implementation of Several Multi-Standard High Performance Single-Wideband and Multi-Wideband Microwave Planar Filters
The objectives of this work are to review, investigate and model the microwave planar filters of the modern wireless communication system. The recent main stream of microwave filters are classified and discussed separately. Various microwave filters with detailed applications are investigated in terms of their geometrical structures and operational performances. A comprehensive theoretical study of microwave filters is presented. The main types of microwave filters including the basic low-pass filters such as Butterworth and Chebyshev filters are fully analysed and described in detail. The transformation from low-pass prototype filters to high-pass filters, band-pass filters and band-stop filters are illustrated and introduced. Research work on stepped impedance resonator (SIR) and asymmetric stepped impedance resonator (ASIR) structure is presented. The characteristics of Ī»g/4, Ī»g/2 and Ī»g (Ī»g is the guided wavelength of the fundamental frequency in the free space) type SIR resonators, and the characteristic of asymmetric SIR resonator are categorized and investigated. Based on the content mentioned above, novel multi-standard high performance asymmetric stepped impedance resonator single-wideband and dual-wideband filters with wide stopbands are proposed. The methodologies to realize wide passband and wide stop-band filters are detailed. In addition, multi-standard high performance triplewideband, quadruple-wideband and quint-wideband filters are suggested and studied. The measurement results for all prototype filters agree well with the theoretical predictions and simulated results from Ansoft HFSS software. The featured broad bandwidths over single/multiple applicable frequency bands and the high performances of the proposed filters make them very promising for applications in future multistandard wireless communication
Review on UWB Bandpass Filters
Rapid development of a number of wireless communication systems imposed an urgent requirement for a technology which contains multi-wireless communication standard. Since the ultra-wideband (UWB) technologies are of advantage in broad bandwidth and high-speed transmission, much attention has been paid to exploiting the UWB bandpass filters. In this chapter, the development process of the UWB bandpass filters and the regulation of the UWB bandpass filter are initially introduced. Subsequently, the application scenarios of UWB filters in UWB communication systems and unique merits of UWB filters were explored. In addition, the primary performance specifications of the UWB filters, including insertion loss, return loss, the level of out-of-band attenuation, and roll-off rate, are also presented. After a brief discussion of microwave network theory, several methods for implementing UWB filters are summarized. Furthermore, the design of the UWB filter with notch band is presented in Section 5. The last section, the Conclusion section, is given at the end of this chapter
Band-pass Filter with Harmonics Suppression Capability
This paper presents a Band-pass Filter (BPF) with a very wide suppressions band. The filter design is based on a modified U-shaped slot. Two pair of U-shaped slots is used to ensure that the filter can suppress the unwanted frequencies up to 4th harmonics. In order to achieve sharp skirt, two transmission zeroes are created near the passband area. Additional transmission zeroes are introduced to deepen the stopband area. Therefore, the passband range starts from 1.3 to 3.3 GHz and the stopband range from 3.3 GHz up to 9 GHz are achieved. The filter performances are verified through simulated and measured results
A Compact Reconfigurable Multi-mode Resonator-based Multi-band Band Pass Filter for Intelligent Transportation Systems Applications
A compact wide band reconfigurable bandpass filter (BPF) which utilises a hemi-circular flower shaped multimode resonator (MMR) is presented. The proposed MMR provides three resonant modes which fall within the broad frequency spectra. Among these, two modes are even and one is odd. These modes are optimised by varying the dimensions so as to obtain the desired frequency response. The fractional bandwidth is more than 96 per cent. The filter can be operated as multi-band BPF. In OFF condition of āPinā diode, the centre frequencies are 2.43 GHz, 3.5 GHz, and 5.9 GHz in ON condition of āPinā diode centre frequencies are 2.43 GHz, 3.5 GHz, 5.9 GHz, 6.5 GHz, and 8.8 GHz which are used for vehicular, WiMAX, intelligent transportation systems and satellite communication respectively. Microstrip filter structures are integrated with āPinā diodes. Appropriate biasing has been provided by choosing lumped components with precise values. The insertion loss in OFF condition are 0.5 dB, 0.67 dB, and 0.8 dB and in ON condition 0.5 dB, 0.7 dB, 1.2 dB, and 1.9 dB. The measured results agree well with the full-wave simulated results
Novel miniature microwave quasi-elliptical function bandpass filters with wideband harmonic suppression
Filters are integral components in all wireless communication systems, and their function is to permit predefined band of frequencies into the system and reject all other signals. The ever-growing demand in the use of the radio frequency (RF) spectrum for new applications has resulted in the need for high performance microwave filters with strict requirements on both inband and out-of-band characteristics. High selectivity, high rejection, low loss and extremely wide spurious-free performance are required for both transmitter and receiver channels. In addition, these devices need to be highly compact, easy to integrate within transceivers and should be amenable to low cost manufacturing. High selectivity is essential to enable the guard band between adjacent channels to be reduced thus improving the efficiency of the RF spectrum and hence increasing the capacity of the system. A low insertion-loss, high return-loss and small group-delay in the passband are necessary to minimize signal degradation. A wide stopband is necessary to suppress spurious passbands outside the filterās bandwidth that may allow spurious emissions from modulation process (harmonic, parasitic, intermodulation and frequency conversion products) and interfere with other systems. The EMC Directive 89/336/EEC mandates that all electronic equipment must comply with the applicable EN specification for EMI.
This thesis presents the research work that has resulted in the development of innovative and compact microstrip bandpass filters that fulfil the above stringent requirements for wireless communication systems. In fact, the proposed highly compact planar microstrip filters provide an alternative solution for existing and next generation of wireless communications systems. In particular, the proposed filters exhibit a low-loss and quasi-elliptic function response that is normally only possible with filter designs using waveguides and high temperature superconductors. The selectivity of the filters has been improved by inserting a pair of transmission zeros between the passband edges, and implementing notched rejection bands in the filterās frequency response to widen its stopband performance. The filter structures have been analysed theoretically and modelled by using Keysight Technologiesā Advanced Design System (ADSā¢) and MomentumĀ® software.
The dissertation is essentially composed of four main sections. In the first section, several compact and quasi-elliptic function bandpass filter structures are proposed and theoretically analysed. Selectivity and stopband performance of these filters is enhanced by loading the input and output feed-lines with inductive stubs that introduce transmission zeros at specified frequencies in the filterās frequency response. This technique is shown to provide a sharp 3-dB roll-off and steep selectivity skirt with high out-of-band rejection over a wide frequency span. In addition, the 3-dB fractional bandwidth of the filters is shown to be controllable by manipulating the filterās geometric parameters.
Traditional microwave bandpass filters are designed using quarter-wavelength distributed transmission-line resonators that are either end-coupled or side-coupled. The sharpness of the filter response is determined by the number of resonators employed which degrades the filterās passband loss performance. This results in a filter with a significantly larger footprint which precludes miniaturization. To circumvent these drawbacks the second section describes the development of a novel and compact wideband bandpass filter with the desired characteristics. The quasi-elliptic function filter comprises open-loop resonators that are coupled to each other using a stub loaded resonator. The proposed filter is shown to achieve a wideband 3-dB fractional bandwidth of 23% with much better loss performance, sharp skirt selectivity and very wide rejection bandwidth.
The third section describes the investigation of novel ultra-wideband (UWB) microstrip bandpass filter designs. Parametric study enabled the optimization of the filterās performance which was verified through practical measurements. The proposed filters meet the stringent characteristics required by modern communications systems, i.e. the filters are highly compact and miniature even when fabricated on a low dielectric constant substrate, possess a sharp quasi-elliptic function bandpass response with low passband insertion-loss, and ultra-wide stopband performance.
With the rapid development of multi-band operation in modern and next generation wireless communication systems, there is a great demand for single frequency discriminating devices that can operate over multiple frequency bands to facilitate miniaturization. These multi-band bandpass filters need to be physically small, have low insertion-loss, high return-loss, and excellent selectivity. In the fourth section two miniature microstrip dual-band and triple-band bandpass filter designs are explored. A detailed parametric study was conducted to fully understand how the geometric parameters of the filters affected their performance. The optimized filters were fabricated and measured to validate their performance
UWB Technology
Ultra Wide Band (UWB) technology has attracted increasing interest and there is a growing demand for UWB for several applications and scenarios. The unlicensed use of the UWB spectrum has been regulated by the Federal Communications Commission (FCC) since the early 2000s. The main concern in designing UWB circuits is to consider the assigned bandwidth and the low power permitted for transmission. This makes UWB circuit design a challenging mission in today's community. Various circuit designs and system implementations are published in this book to give the reader a glimpse of the state-of-the-art examples in this field. The book starts at the circuit level design of major UWB elements such as filters, antennas, and amplifiers; and ends with the complete system implementation using such modules
Recommended from our members
New multi-standard dual-wideband and quad-wideband asymmetric step impedance resonator filters with wide stop band restriction
YesNew multi-standard wide band filters with compact sizes are designed for wireless communication devices. The proposed structures realize dual-wideband and quad-wideband characteristics by using a new skew-symmetrical coupled pair of asymmetric stepped impedance resonators, combined with other structures. The first and second dual-wideband filters realize fractional bandwidths (FBW) of 43.2%/31.9% at the central frequencies (CF) of 1.875/1.63 GHz, and second bandwidths of 580 MHz/1.75 GHz at CF of 5.52/4.46 GHz, respectively. The proposed quad-band filter realizes its first/second/third/fourth pass bands at CF 2.13/5.25/7.685/9.31 GHz with FBW of 46.0%/11.4%/4.6%and 5.4%, respectively. The wide pass bands are attributed to the mutual coupling of the modified ASIR resonators and their bandwidths are controllable by tuning relative parameters while the wide stop band performance is optimized by the novel interdigital cross coupled line structure and parallel uncoupled microstrip line structure. Moreover, the quad band is generated by introducing the novel defected rectangle structure. These multi-standard filters are simulated, fabricated and measured, and measured results agree well with both simulated results and theory predictions. The good in-band and out-of-band performances, the miniaturized sizes and simple structures of the proposed filters make them very promising for applications in future multi-standard wireless communication.Horizon 2020 Framework Programme(European Union), Grant/Award Number:H2020-MSCA-ITN-2016 SECRET-722 42
Novel Topologies Based Rf Filtering Components And Methodologies For Wireless Communication System
Driven by the rapid progress of wireless communication technology in the past several decades, multiple generations of cellular technologies have been developed, deployed, and adopted to provide more convenient communication services to users. Nowadays, the personal hand-held devices, supporting multiple wireless standards, have been a multimedia terminal encompassing elements and functions such as video callers, Internet connectivity, home appliances remote controller, GPS, TV reception, and beyond. In order to accommodate a variety of wireless standards in a single device without imposing a substantial increase in cost and size, current and future RF transceiver front-ends should be designed with more attention. The main objective of this dissertation is to study new design topologies and implement a series of high performance RF filtering components which play critical roles in miniaturized RF transceivers supporting multiple wireless standards. A compact dual-band filter with high selectivity and wide rejection band, a filtering Wilkinson power divider, and balanced filters with fixed/reconfigurable center frequencies are proposed and successfully developed. In addition, an equation-based methodology is also first proposed and fully investigated to r
Extracting dualband antenna response from UWB based on current distribution analysis
An entirely new design approach has been employed to create the printed dualband monopole antenna that was the subject of this investigation. The printed monopole antenna construction is the primary component of the suggested design. CPW transmission lines with 50 Ohm impedance and a relative dielectric constant of 4.6 were used to power the antennas, which were housed in thin substrates with thicknesses of 1.6 millimeters (mm). In this study, the antennas discussed were modeled and analyzed by Computer Simulation Technique (CST) simulator. Using fractal structures on the radiating element of a dualband antenna can improve the resonance of the antenna as well as the coupling of the resonating bands that emerge from the resonance
Review on the Design of the Isolation Techniques for UWB-MIMO Antennas
Ultra wide band - Multiple Input Multiple Output antenna technology provides higher data rates and the combination of the ultra wide band (UWB) and the multiple input multiple output (MIMO) technologies provides a solution for the demand of still higher data rates i.e. in excess of 3 Gb/sec in the future. As the antenna technologies are improving, the size of the MIMO antenna is growing smaller and smaller. Placing the antenna elements in such close proximity increases the coupling between them. Various isolation techniques have to be introduced between the antenna elements to decrease the coupling and to improve the isolation. A study of the various isolation enhancement techniques have been made in this review. It analyses the various isolation enhancement methods such as using orthogonal polarization, parasitic elements, varied decoupling structures, defected ground structures (DGS), neutralization line (NL) and finally by using metamaterials. Metamaterials is a technology to perk up the isolation between the antenna elements. Split ring resonator (SRR) behaves as a metamaterial and it is used as an isolation mechanism in this study. The antennas are simulated and the results are compared. The method using parasitic elements gives the highest isolation of 35 dB and it is 5 dB better than the methods using orthogonal polarization and using the decoupling structure. The performance of all the antennas satisfies the conditions for minimum isolation. The envelope correlation coefficient is nearly zero in all the antennas and it implies good diversity performance. The diversity gain is also calculated for the various antennas and it satisfies good diversity performance. The bandwidth of the antennas is in the UWB frequency range and they have a fractional bandwidth above the required value of 1.09. The capacity loss for all the antennas is very low and the antennas using defected ground structure and the decoupling structure gives very low capacity loss