208 research outputs found

    A review article of multi-band, multi-mode microstrip filters for RF, WLAN, WiMAX, and wireless communication by using stepped impedance resonator (SIR)

    Get PDF
    Filters are the basic part in wired, and wireless telecommunications and radar system circuits and they play an important role in determining the cost and performance of a system. The increasing demand for high performance in the fields of RF, WLAN, WiMAX and other wireless communications led to the great revolution in the advancement of the development of a compact microstrip resonator filter design. All these have made a vital contribution to both the required performance specifications for filters and other commercial requirements in terms of low cost, large storage capacity and high-speed performance. This review paper presents several design examples for multi-band, multi - mode microstrip filter resonators to satisfy RF, WLAN, WiMAX, UWB and other wireless communication frequency bands. To analyse the resonant frequencies odd - mode and even -modes can be used for the symmetrical structure. In general, the multi-mode resonators can be designed by using different methods like cross-coupling resonators Structure, and the allocation of the fundamental resonant frequencies of the resonator as stated by the Chebyshev's insertion loss function

    Multi mode Resonator based Concurrent Triple band Band pass Filter with Six Transmission Zeros for Defence Intelligent Transportation Systems Application

    Get PDF
    A compact and highly selective triple-band bandpass filter (BPF) is designed and presented in this paper. Proposed filter offers low insertion loss, and passband characteristics is achieved by using two coupled MMR multi-mode resonators (MMR1 and MMR2) and an inverted T and circular shape MMRs. The filter operates at frequency 2.43 GHz (Vehicular Communication), 5.91 GHz (ITS band), and 8.86 GHz (satellite communication band). The simulation and measurement results show a minimum insertion loss of 1.6 dB, 0.73 dB, and 2.8 dB for triple-band BPF. The return loss is found to be greater than 13.06 dB, 28.6 dB, and 21.55 dB. It is noted that measurement results are in accordance with the result of electromagnetic simulation. Desired triple-band multi-mode resonators (MMRs) filter characteristics are achieved with six transmission zeroes (TZs). The filter comprises of MMRs which provide small size and control over the spurious frequency. By using a parallel-coupled microstrip line, the first and third passbands are realised. Whereas by using an end-coupled microstrip line, the second passband is recognised. At the input and output ports, the resonator coupling technique is used. By using the anti-parallel microstrip line arrangement, the transmission zero is acquired. The dimensions of the designed filter are 25×16 mm 2

    Novel miniature microwave quasi-elliptical function bandpass filters with wideband harmonic suppression

    Get PDF
    Filters are integral components in all wireless communication systems, and their function is to permit predefined band of frequencies into the system and reject all other signals. The ever-growing demand in the use of the radio frequency (RF) spectrum for new applications has resulted in the need for high performance microwave filters with strict requirements on both inband and out-of-band characteristics. High selectivity, high rejection, low loss and extremely wide spurious-free performance are required for both transmitter and receiver channels. In addition, these devices need to be highly compact, easy to integrate within transceivers and should be amenable to low cost manufacturing. High selectivity is essential to enable the guard band between adjacent channels to be reduced thus improving the efficiency of the RF spectrum and hence increasing the capacity of the system. A low insertion-loss, high return-loss and small group-delay in the passband are necessary to minimize signal degradation. A wide stopband is necessary to suppress spurious passbands outside the filter’s bandwidth that may allow spurious emissions from modulation process (harmonic, parasitic, intermodulation and frequency conversion products) and interfere with other systems. The EMC Directive 89/336/EEC mandates that all electronic equipment must comply with the applicable EN specification for EMI. This thesis presents the research work that has resulted in the development of innovative and compact microstrip bandpass filters that fulfil the above stringent requirements for wireless communication systems. In fact, the proposed highly compact planar microstrip filters provide an alternative solution for existing and next generation of wireless communications systems. In particular, the proposed filters exhibit a low-loss and quasi-elliptic function response that is normally only possible with filter designs using waveguides and high temperature superconductors. The selectivity of the filters has been improved by inserting a pair of transmission zeros between the passband edges, and implementing notched rejection bands in the filter’s frequency response to widen its stopband performance. The filter structures have been analysed theoretically and modelled by using Keysight Technologies’ Advanced Design System (ADS™) and Momentum® software. The dissertation is essentially composed of four main sections. In the first section, several compact and quasi-elliptic function bandpass filter structures are proposed and theoretically analysed. Selectivity and stopband performance of these filters is enhanced by loading the input and output feed-lines with inductive stubs that introduce transmission zeros at specified frequencies in the filter’s frequency response. This technique is shown to provide a sharp 3-dB roll-off and steep selectivity skirt with high out-of-band rejection over a wide frequency span. In addition, the 3-dB fractional bandwidth of the filters is shown to be controllable by manipulating the filter’s geometric parameters. Traditional microwave bandpass filters are designed using quarter-wavelength distributed transmission-line resonators that are either end-coupled or side-coupled. The sharpness of the filter response is determined by the number of resonators employed which degrades the filter’s passband loss performance. This results in a filter with a significantly larger footprint which precludes miniaturization. To circumvent these drawbacks the second section describes the development of a novel and compact wideband bandpass filter with the desired characteristics. The quasi-elliptic function filter comprises open-loop resonators that are coupled to each other using a stub loaded resonator. The proposed filter is shown to achieve a wideband 3-dB fractional bandwidth of 23% with much better loss performance, sharp skirt selectivity and very wide rejection bandwidth. The third section describes the investigation of novel ultra-wideband (UWB) microstrip bandpass filter designs. Parametric study enabled the optimization of the filter’s performance which was verified through practical measurements. The proposed filters meet the stringent characteristics required by modern communications systems, i.e. the filters are highly compact and miniature even when fabricated on a low dielectric constant substrate, possess a sharp quasi-elliptic function bandpass response with low passband insertion-loss, and ultra-wide stopband performance. With the rapid development of multi-band operation in modern and next generation wireless communication systems, there is a great demand for single frequency discriminating devices that can operate over multiple frequency bands to facilitate miniaturization. These multi-band bandpass filters need to be physically small, have low insertion-loss, high return-loss, and excellent selectivity. In the fourth section two miniature microstrip dual-band and triple-band bandpass filter designs are explored. A detailed parametric study was conducted to fully understand how the geometric parameters of the filters affected their performance. The optimized filters were fabricated and measured to validate their performance

    Review on UWB Bandpass Filters

    Get PDF
    Rapid development of a number of wireless communication systems imposed an urgent requirement for a technology which contains multi-wireless communication standard. Since the ultra-wideband (UWB) technologies are of advantage in broad bandwidth and high-speed transmission, much attention has been paid to exploiting the UWB bandpass filters. In this chapter, the development process of the UWB bandpass filters and the regulation of the UWB bandpass filter are initially introduced. Subsequently, the application scenarios of UWB filters in UWB communication systems and unique merits of UWB filters were explored. In addition, the primary performance specifications of the UWB filters, including insertion loss, return loss, the level of out-of-band attenuation, and roll-off rate, are also presented. After a brief discussion of microwave network theory, several methods for implementing UWB filters are summarized. Furthermore, the design of the UWB filter with notch band is presented in Section 5. The last section, the Conclusion section, is given at the end of this chapter

    Recent Trends on Dual- and Triple-Band Microwave Filters for Wireless Communications

    Get PDF
    In the past few years, several designs of dual- and triple-band microwave filters satisfying various objectives have been proposed for wireless communication. Several designs are new concepts, whereas others are inspired from previous works. The development trends of these designs can be reviewed from this compilation of studies. This paper begins with an explanation of dual- and triple-band microwave filters, followed by a discussion on several designs in terms of size, measurement, performance, and technology use. Among various designs, microstrip band-pass filters are extensively used because of their simple design procedures and because they can be integrated into circuits easily. Furthermore, most researchers use low frequencies in their designs because of the demands of current wireless applications. Finally, designs are proposed to produce compact microwave filters with good performance

    Compact Dual-band Parallel Coupled T-shaped SIR Filter for WLAN Applications

    Get PDF
    In this article, a new compact dual-band bandpass filter was introduced. The filter utilized two operating bands centered at 2.45 GHz and 5 GHz widely used for wireless local area network applications. The filter consists of T-shaped sections of step impedance resonator. The structure is an even symmetrical around electrical or magnetic wall, so the operation mechanism of the filter can be analyzed by an even- and odd-mode transmission line theory. The resonator structure is parallel coupled to a pair of 50 Ω input/output ports. Proper feeding and coupling structures can realize at least two transmission zeros around each of the operating band. To enhance the spurs rejection in the out of the band response of the filter, additive transmission zero at 10 GHz was created by adding stub of quarter guided wavelength at a selected distant from the output port edge. The filter is designed and optimized using the full wave Electromagnetic simulator. The center frequency of the designed bands can be easily refined by the filter dimensions. The overall dimension of the filter is (where  is the guided wavelength at the frequency of 2.45 GHz) corresponding to 14.3 mm x 22 mm

    Compact dual-mode triple-band bandpass filters using three pairs of degenerate modes in a ring resonator

    Get PDF
    In this paper, a class of triple-band bandpass filters with two transmission poles in each passband is proposed using three pairs of degenerate modes in a ring resonator. In order to provide a physical insight into the resonance movements, the equivalent lumped circuits are firstly developed, where two transmission poles in the first and third passbands can be distinctly tracked as a function of port separation angle. Under the choice of 135° and 45° port separations along a ring, four open-circuited stubs are attached symmetrically along the ring and they are treated as perturbation elements to split the two second-order degenerate modes, resulting in a two-pole second passband. To verify the proposed design concept, two filter prototypes on a single microstrip ring resonator are finally designed, fabricated, and measured. The three pairs of transmission poles are achieved in all three passbands, as demonstrated and verified in simulated and measured results. © 2011 IEEE.published_or_final_versio

    UWB Technology

    Get PDF
    Ultra Wide Band (UWB) technology has attracted increasing interest and there is a growing demand for UWB for several applications and scenarios. The unlicensed use of the UWB spectrum has been regulated by the Federal Communications Commission (FCC) since the early 2000s. The main concern in designing UWB circuits is to consider the assigned bandwidth and the low power permitted for transmission. This makes UWB circuit design a challenging mission in today's community. Various circuit designs and system implementations are published in this book to give the reader a glimpse of the state-of-the-art examples in this field. The book starts at the circuit level design of major UWB elements such as filters, antennas, and amplifiers; and ends with the complete system implementation using such modules

    A Compact Triple Band Metamaterial Inspired Bandpass Filter Using Inverted S-shape Resonator

    Get PDF
    This paper represents the compact metamaterial inspired triple-band filter using two inverted S-shape resonator and two C-shape stub with via. Proposed filter is printed on FR-4 epoxy glass substrate with 1.6 mm thickness. The measured 3 dB fractional bandwidth of 40 % (1.6-2.4 GHz), 16.5 % (3.9-4.6 GHz) and 14.3 % (5.2-6.0 GHz) at centre frequencies 2.0 GHz, 4.25 GHz and 5.6 GHz respectively. This filter offers electrical circuit size of 0.22λg × 0.16λg, where given λg is the guided wavelength at centre frequency of first passband 2.0 GHz. The performance parameter of designed filter have characterized by fractional bandwidth, insertion loss, dielectric constant, return loss, circuit size and group delay. Both simulated and measured results are shown to validate the proposed filter. Finally, the MTM properties of proposed filter has been verified by extracting its dispersion diagram. It is suitable for GSM 1800, LTE 2300 and WiMAX (5.2-5.8 GHz) application

    Miniaturised and reconfigurable planar filters for ultra-wideband applications

    Get PDF
    An increasing demand for electromagnetic spectrum has resulted from the emergence of feature-rich and faster throughputs wireless applications. This necessitates the developments of dynamic reconfigurable or multifunctional systems to better exploit the existing spectrum. Future wireless devices will be expected to communicate over several bands with various other devices in order to fine tune the services they provide to the user. Each band may require a separate RF transceiver and such modern wireless multi-band multi-mode communication systems call for high performance, highly integrated compact modules. Since the Federal Communications Commission (FCC) released the unlicensed frequency band 3.1-10.6 GHz for ultra-wideband (UWB) commercial communications, the development race for commercialising UWB technology has seen a dramatic increase around the world. The aim of this research is to develop reconfigurable planar microwave filters for ultrawideband applications. The project investigates some key design issues of reconfigurable filters, which are being observed constantly in the latest development and realisation of microwave filters. Both analytical and numerical methods are performed to construct a realistic and functional design. Two different types of frequency reconfigurability are investigated in this thesis: discrete (e.g. PIN diode, Optical switch) and continuous (e.g. varactor diode). Using the equivalent circuits and considering the direct coupled filter structure in most cases, several topologies with attractive features are developed for future communication systems. The proposed works may be broadly categorised into three sections as follows. The first section explores a square ring shape close loop resonator along with an opencircuited stub in the symmetry plane. To realise a reconfigurable frequency states within the same spectrum, an innovative approach is developed for this case. An optical or photoconductive switch, comprised of a silicon die activated using near infrared light is investigated as a substitute of PIN diode and performances are evaluated to compare the feasibilities. In addition, a in-band interference rejection technique via externally coupled Tshape resonator is shown. However, it is observed that both structures achieve significant size reductions by utilising the inner part of the resonators. To improve the filter selectivity, a convenient design approach generating a pair of transmission zeros between both passband edges and a single zero in the stop band for harmonic suppression is discussed in the second section. Moreover, the development of notched rejection bands are studied and several novel methods to create a single and multiple notched bands employing the square ring shape structure are proposed. On inspection, it is found that the notch structure can be implemented without deteriorating the filter performances. The discussions are supplemented with detailed design examples which are accompanied by theoretical, simulated and experimental results in order to illustrate the filter development process and showcase practical filter performance. The third section reveals a novel highly compact planar dual-mode resonator with sharp rejections characteristics for UWB applications. A bandwidth reconfiguring technique is demonstrated by splitting its even-mode resonance. Filter structure with the dual-mode resonator is shown to have a relatively wide tuning range, significantly low insertion loss and a constant selectivity along with frequency variations in comparison to similar published works. Finally, the earlier dual-mode structure are modified to realise a dual wideband behaviour. A detail analysis with comprehensive design procedures is outlined and a solution for controlling the frequency bandwidths independently according to the application interest is provided. In line with the previous section, experimental verification is presented to support and supplement the discussions
    corecore