Realizing arbitrary-precision modular multiplication with a fixed-precision multiplier datapath

Within the context of cryptographic hardware, the term scalability refers to the ability to process operands of any size, regardless of the precision of the underlying data path or registers. In this paper we present a simple yet effective technique for increasing the scalability of a fixed-precision Montgomery multiplier. Our idea is to extend the datapath of a Montgomery multiplier in such a way that it can also perform an ordinary multiplication of two n-bit operands (without modular reduction), yielding a 2n-bit result. This conventional (nxn->2n)-bit multiplication is then used as a “sub-routine” to realize arbitrary-precision Montgomery multiplication according to standard software algorithms such as Coarsely Integrated Operand Scanning (CIOS). We show that performing a 2n-bit modular multiplication on an n-bit multiplier can be done in 5n clock cycles, whereby we assume that the n-bit modular multiplication takes n cycles. Extending a Montgomery multiplier for this extra functionality requires just some minor modifications of the datapath and entails a slight increase in silicon area

A high-speed integrated circuit with applications to RSA Cryptography

Merged with duplicate record 10026.1/833 on 01.02.2017 by CS (TIS)The rapid growth in the use of computers and networks in government, commercial and private communications systems has led to an increasing need for these systems to be secure against unauthorised access and eavesdropping. To this end, modern computer security systems employ public-key ciphers, of which probably the most well known is the RSA ciphersystem, to provide both secrecy and authentication facilities. The basic RSA cryptographic operation is a modular exponentiation where the modulus and exponent are integers typically greater than 500 bits long. Therefore, to obtain reasonable encryption rates using the RSA cipher requires that it be implemented in hardware. This thesis presents the design of a high-performance VLSI device, called the WHiSpER chip, that can perform the modular exponentiations required by the RSA cryptosystem for moduli and exponents up to 506 bits long. The design has an expected throughput in excess of 64kbit/s making it attractive for use both as a general RSA processor within the security function provider of a security system, and for direct use on moderate-speed public communication networks such as ISDN. The thesis investigates the low-level techniques used for implementing high-speed arithmetic hardware in general, and reviews the methods used by designers of existing modular multiplication/exponentiation circuits with respect to circuit speed and efficiency. A new modular multiplication algorithm, MMDDAMMM, based on Montgomery arithmetic, together with an efficient multiplier architecture, are proposed that remove the speed bottleneck of previous designs. Finally, the implementation of the new algorithm and architecture within the WHiSpER chip is detailed, along with a discussion of the application of the chip to ciphering and key generation

Low Power and Improved Speed Montgomery Multiplier using Universal Building Blocks

This paper describes the arithmetic blocks based on Montgomery Multiplier (MM), which reduces complexity, gives lower power dissipation and higher operating frequency. The main objective in designing these arithmetic blocks is to use modified full adder structure and carry save adder structure that can be implemented in algorithm based MM circuit. The conventional full adder design acts as a benchmark for comparison, the second is the modified Boolean equation for full adder and third design is the design of full adder consisting of two XOR gate and a 2-to-1 Multiplexer. Besides Universal gates such as NOR gate and NAND gate, full adder circuits are used to further improve the speed of the circuit. The MM circuit is evaluated based on different parameters such as operating frequency, power dissipation and area of occupancy in FPGA board. The schematic designs of the arithmetic components along with the MM architecture are constructed using Quartus II tool, while the simulation is done using Model sim for verification of circuit functionality which has shown improvement on the full adder design with two XOR gate and one 2-to-1 Multiplexer implementation in terms of power dissipation, operating frequency and area

Low Power and Improved Speed Montgomery Multiplier using Universal Building Blocks

This paper describes the arithmetic blocks based on Montgomery Multiplier (MM), which reduces complexity, gives lower power dissipation and higher operating frequency. The main objective in designing these arithmetic blocks is to use modified full adder structure and carry save adder structure that can be implemented in algorithm based MM circuit. The conventional full adder design acts as a benchmark for comparison, the second is the modified Boolean equation for full adder and third design is the design of full adder consisting of two XOR gate and a 2-to-1 Multiplexer. Besides Universal gates such as NOR gate and NAND gate, full adder circuits are used to further improve the speed of the circuit. The MM circuit is evaluated based on different parameters such as operating frequency, power dissipation and area of occupancy in FPGA board. The schematic designs of the arithmetic components along with the MM architecture are constructed using Quartus II tool, while the simulation is done using Model sim for verification of circuit functionality which has shown improvement on the full adder design with two XOR gate and one 2-to-1 Multiplexer implementation in terms of power dissipation, operating frequency and area

Maximizing the Efficiency using Montgomery Multipliers on FPGA in RSA Cryptography for Wireless Sensor Networks

The architecture and modeling of RSA public key encryption/decryption systems are presented in this work. Two different architectures are proposed, mMMM42 (modified Montgomery Modular Multiplier 4 to 2 Carry Save Architecture) and RSACIPHER128 to check the suitability for implementation in Wireless Sensor Nodes to utilize the same in Wireless Sensor Networks. It can easily be fitting into systems that require different levels of security by changing the key size. The processing time is increased and space utilization is reduced in FPGA due to its reusability. VHDL code is synthesized and simulated using Xilinx-ISE for both the architectures. Architectures are compared in terms of area and time. It is verified that this architecture support for a key size of 128bits. The implementation of RSA encryption/decryption algorithm on FPGA using 128 bits data and key size with RSACIPHER128 gives good result with 50% less utilization of hardware. This design is also implemented for ASIC using Mentor Graphics

Performance Analysis of Montgomery Multiplier using 32nm CNTFET Technology

In VLSI design vacillating the parameters results in variation of critical factors like area, power and delay. The dominant sources of power dissipation in digital systems are the digital multipliers. A digital multiplier plays a major role in a mixture of arithmetic operations in digital signal processing applications hinge on add and shift algorithms. In order to accomplish high execution speed, parallel array multipliers are comprehensively put into application. The crucial drawback of these multipliers is that it exhausts more power than any other multiplier architectures. Montgomery Multiplication is the popularly used algorithm as it is the most efficient technique to perform arithmetic based calculations. A high-speed multiplier is greatly coveted for its extraordinary leverage. The primary blocks of a multiplier are basically comprised of adders. Thus, in order to attain a significant reduction in power consumption at the chip level the power utilization in adders can be decreased. To obtain desired results in performance parameters of the multiplier an efficient and dynamic adder is proposed and incorporated in the Montgomery multiplier. The Carbon Nanotube field effect transistor (CNTFET) is a promising new device that may supersede some of the fundamental limitations of a silicon based MOSFET. The architecture has been designed in 130nm and 32nm CMOS and CNTFET technology in Synopsys HSpice. The analysed parameters that are considered in determining the performance are power delay product, power and delay and comparison is made with both the technologies.The simulation results of this paper affirmed the CNTFET based Montgomery multiplier improved power consumption by 76.47% ,speed by 72.67% and overall energy by 67.76% as compared to MOSFET-based Montgomery multiplier

Cryptographic primitives on reconfigurable platforms.

Tsoi Kuen Hung.Thesis (M.Phil.)--Chinese University of Hong Kong, 2002.Includes bibliographical references (leaves 84-92).Abstracts in English and Chinese.Chapter 1 --- Introduction --- p.1Chapter 1.1 --- Motivation --- p.1Chapter 1.2 --- Objectives --- p.3Chapter 1.3 --- Contributions --- p.3Chapter 1.4 --- Thesis Organization --- p.4Chapter 2 --- Background and Review --- p.6Chapter 2.1 --- Introduction --- p.6Chapter 2.2 --- Cryptographic Algorithms --- p.6Chapter 2.3 --- Cryptographic Applications --- p.10Chapter 2.4 --- Modern Reconfigurable Platforms --- p.11Chapter 2.5 --- Review of Related Work --- p.14Chapter 2.5.1 --- Montgomery Multiplier --- p.14Chapter 2.5.2 --- IDEA Cipher --- p.16Chapter 2.5.3 --- RC4 Key Search --- p.17Chapter 2.5.4 --- Secure Random Number Generator --- p.18Chapter 2.6 --- Summary --- p.19Chapter 3 --- The IDEA Cipher --- p.20Chapter 3.1 --- Introduction --- p.20Chapter 3.2 --- The IDEA Algorithm --- p.21Chapter 3.2.1 --- Cipher Data Path --- p.21Chapter 3.2.2 --- S-Box: Multiplication Modulo 216 + 1 --- p.23Chapter 3.2.3 --- Key Schedule --- p.24Chapter 3.3 --- FPGA-based IDEA Implementation --- p.24Chapter 3.3.1 --- Multiplication Modulo 216 + 1 --- p.24Chapter 3.3.2 --- Deeply Pipelined IDEA Core --- p.26Chapter 3.3.3 --- Area Saving Modification --- p.28Chapter 3.3.4 --- Key Block in Memory --- p.28Chapter 3.3.5 --- Pipelined Key Block --- p.30Chapter 3.3.6 --- Interface --- p.31Chapter 3.3.7 --- Pipelined Design in CBC Mode --- p.31Chapter 3.4 --- Summary --- p.32Chapter 4 --- Variable Radix Montgomery Multiplier --- p.33Chapter 4.1 --- Introduction --- p.33Chapter 4.2 --- RSA Algorithm --- p.34Chapter 4.3 --- Montgomery Algorithm - Ax B mod N --- p.35Chapter 4.4 --- Systolic Array Structure --- p.36Chapter 4.5 --- Radix-2k Core --- p.37Chapter 4.5.1 --- The Original Kornerup Method (Bit-Serial) --- p.37Chapter 4.5.2 --- The Radix-2k Method --- p.38Chapter 4.5.3 --- Time-Space Relationship of Systolic Cells --- p.38Chapter 4.5.4 --- Design Correctness --- p.40Chapter 4.6 --- Implementation Details --- p.40Chapter 4.7 --- Summary --- p.41Chapter 5 --- Parallel RC4 Engine --- p.42Chapter 5.1 --- Introduction --- p.42Chapter 5.2 --- Algorithms --- p.44Chapter 5.2.1 --- RC4 --- p.44Chapter 5.2.2 --- Key Search --- p.46Chapter 5.3 --- System Architecture --- p.47Chapter 5.3.1 --- RC4 Cell Design --- p.47Chapter 5.3.2 --- Key Search --- p.49Chapter 5.3.3 --- Interface --- p.50Chapter 5.4 --- Implementation --- p.50Chapter 5.4.1 --- RC4 cell --- p.51Chapter 5.4.2 --- Floorplan --- p.53Chapter 5.5 --- Summary --- p.53Chapter 6 --- Blum Blum Shub Random Number Generator --- p.55Chapter 6.1 --- Introduction --- p.55Chapter 6.2 --- RRNG Algorithm . . --- p.56Chapter 6.3 --- PRNG Algorithm --- p.58Chapter 6.4 --- Architectural Overview --- p.59Chapter 6.5 --- Implementation --- p.59Chapter 6.5.1 --- Hardware RRNG --- p.60Chapter 6.5.2 --- BBS PRNG --- p.61Chapter 6.5.3 --- Interface --- p.66Chapter 6.6 --- Summary --- p.66Chapter 7 --- Experimental Results --- p.68Chapter 7.1 --- Design Platform --- p.68Chapter 7.2 --- IDEA Cipher --- p.69Chapter 7.2.1 --- Size of IDEA Cipher --- p.70Chapter 7.2.2 --- Performance of IDEA Cipher --- p.70Chapter 7.3 --- Variable Radix Systolic Array --- p.71Chapter 7.4 --- Parallel RC4 Engine --- p.75Chapter 7.5 --- BBS Random Number Generator --- p.76Chapter 7.5.1 --- Size --- p.76Chapter 7.5.2 --- Speed --- p.76Chapter 7.5.3 --- External Clock --- p.77Chapter 7.5.4 --- Random Performance --- p.78Chapter 7.6 --- Summary --- p.78Chapter 8 --- Conclusion --- p.81Chapter 8.1 --- Future Development --- p.83Bibliography --- p.8

Montgomery and RNS for RSA Hardware Implementation

There are many architectures for RSA hardware implementation which improve its performance. Two main methods for this purpose are Montgomery and RNS. These are fast methods to convert plaintext to ciphertext in RSA algorithm with hardware implementation. RNS is faster than Montgomery but it uses more area. The goal of this paper is to compare these two methods based on the speed and on the used area. For this purpose the architecture that has a better performance for each method is selected, and some modification is done to enhance their performance. This comparison can be used to select the proper method for hardware implementation in both FPGA and ASIC design