Integration of a mean-torque diesel engine model into a hardware-in-the-loop shipboard network simulation using lambda tuning

This study describes the creation of a hardware-in-the-loop (HIL) environment for use in evaluating network architecture, control concepts and equipment for use within marine electrical systems. The environment allows a scaled hardware network to be connected to a simulation of a multi-megawatt marine diesel prime mover, coupled via a synchronous generator. This allows All-Electric marine scenarios to be investigated without large-scale hardware trials. The method of closing the loop between simulation and hardware is described, with particular reference to the control of the laboratory synchronous machine, which represents the simulated generator(s). The fidelity of the HIL simulation is progressively improved in this study. First, a faster and more powerful field drive is implemented to improve voltage tracking. Second, the phase tracking is improved by using two nested proportional–integral–derivative–acceleration controllers for torque control, tuned using lambda tuning. The HIL environment is tested using a scenario involving a large constant-power load step. This provides a very severe test of the HIL environment, and also reveals the potentially adverse effects of constant-power loads within marine power systems

Impact of marine power system architectures on IFEP vessel availability and survivability

In recent years integrated full electric propulsion (IFEP) has become a popular power system concept within the marine community, both for the naval and the commercial community. In this paper the authors discuss the need for a detailed investigation into the impact of different IFEP power system architectures on the availability of power and hence on the survivability of the vessel. The power system architectures considered here could relate to either a commercial or a naval vessel and include radial, ring and hybrid AC/DC arrangements. Comparative fault studies of the architectures were carried out in an attempt to make valuable observations on the survivability of a vessel. Simulation results demonstrate that the ring and hybrid AC/DC architectural contribute to a higher survivability than the radial architecture. However, there are still challenges that need to be addressed and therefore potential solutions such as fault current limiters will be considered

On Small Satellites for Oceanography: A Survey

The recent explosive growth of small satellite operations driven primarily from an academic or pedagogical need, has demonstrated the viability of commercial-off-the-shelf technologies in space. They have also leveraged and shown the need for development of compatible sensors primarily aimed for Earth observation tasks including monitoring terrestrial domains, communications and engineering tests. However, one domain that these platforms have not yet made substantial inroads into, is in the ocean sciences. Remote sensing has long been within the repertoire of tools for oceanographers to study dynamic large scale physical phenomena, such as gyres and fronts, bio-geochemical process transport, primary productivity and process studies in the coastal ocean. We argue that the time has come for micro and nano satellites (with mass smaller than 100 kg and 2 to 3 year development times) designed, built, tested and flown by academic departments, for coordinated observations with robotic assets in situ. We do so primarily by surveying SmallSat missions oriented towards ocean observations in the recent past, and in doing so, we update the current knowledge about what is feasible in the rapidly evolving field of platforms and sensors for this domain. We conclude by proposing a set of candidate ocean observing missions with an emphasis on radar-based observations, with a focus on Synthetic Aperture Radar.Comment: 63 pages, 4 figures, 8 table

Design of a Hybrid Propulsion Architecture for Midsize Boats

Abstract This paper presents preliminary evaluations on the design of hybrid propulsion architectures related to midsize boats. The analysis is carried out for the case study of a retrofit operation proposed for an oceanographic ship, which is used by the researchers of the National Research Council of Italy for experimental campaigns in the Mediterranean Sea. Starting from the information obtained on the existing architecture by means of various on-board inspections, an experimental set-up is proposed for the monitoring and acquisition of the main electrical and mechanical parameters of the ship, during her navigation campaigns. Different possible hybrid configurations are also proposed, identifying the main advantages and drawbacks of each configuration for the considered application. The proposed set-up allows obtaining experimental information, about the behaviour of the ship in a large variety of operative conditions, which will be useful to support the choice of a proper hybrid propulsion architecture and the optimal design of components

Index to NASA Tech Briefs, 1975

This index contains abstracts and four indexes--subject, personal author, originating Center, and Tech Brief number--for 1975 Tech Briefs

Electric propulsion for near-Earth space missions

A set of missions was postulated that was considered to be representative of those likely to be desirable/feasible over the next three decades. The characteristics of these missions, and their payloads, that most impact the choice/design of the requisite propulsion system were determined. A system-level model of the near-Earth transportation process was constructed, which incorporated these mission/system characteristics, as well as the fundamental parameters describing the technology/performance of an ion bombardment based electric propulsion system. The model was used for sensitivity studies to determine the interactions between the technology descriptors and program costs, and to establish the most cost-effective directions for technology advancement. The most important factor was seen to be the costs associated with the duration of the mission, and this in turn makes the development of advanced electric propulsion systems having moderate to high efficiencies ( 50 percent) at intermediate ranges of specific impulse (approximately 1000 seconds) very desirable

Concept design of a fast sail assisted feeder container ship

A fast sail assisted feeder container ship concept has been developed for the 2020 container market in the South East Asian and Caribbean regions.The design presented has met the requirements of an initial economic study, with a cargo capacity of 1270 twenty-foot equivalent unit containers, meeting the predictions of container throughput derived from historical data. In determining suitable vessel dimensions, account has also been taken for port and berthing restrictions, and considering hydrodynamic performance. The vessel has been designed for a maximum speed of 25 knots, allowing it to meet the demand for trade whilst reducing the number of ships operating on the routes considered.The design development of the fast feeder concept has involved rigorous analyses in a number of areas to improve the robustness of the final design. Model testing has been key to the development of the concept, by increasing confidence in the final result. This is due to the fact that other analysis techniques are not always appropriate or accurate. Two hull forms have been developed to meet requirements whilst utilising different propulsor combinations. This has enabled evaluation of efficiency gains resulting from different hydrodynamic phenomena for each design. This includes an evaluation of the hydrodynamic performance when utilising the sail system. This has been done using a combination of model test results and data from regression analysis. The final propulsor chosen is a contra-rotating podded drive arrangement. Wind tunnel testing has been used to maximise the performance of a Multi-wing sail system by investigating the effects of wing spacing, stagger and sail-container interactions. This has led to an increase in lift coefficient of 32% from initial predictions. The savings in power requirement due to the sail system are lower than initially predicted. However, another benefit of their installation, motion damping, has been identified. Whilst this has not been fully investigated, additional fuel savings are possible as well as improved seakeeping performance.The design is shown to be environmentally sustainable when compared to existing vessels operating on the proposed routes. This is largely due to the use of low-carbon and zero-sulphur fuel (liquefied natural gas) and improvements in efficiency regarding operation. This especially relates to cargo handling and scheduling. Green house gas emissions have been predicted to fall by 42% and 40% in the two regions should the design be adopted. These savings are also due to the use of the Multi-wing sail system, which contributes to reductions in power requirement of up to 6% when the vessel operates at its lower speed of 15 knots. It is demonstrated that the fast feeder is also economically feasible, with predicted daily cost savings of 27% and 33% in the South East Asian and Caribbean regions respectively. Thus the fast feeder container ship concept is a viable solution for the future of container transhipment. <br/

Fault detection and location in DC systems from initial di/dt measurement

The use of DC for primary power distribution has the potential to bring significant design, cost and efficiency benefits to a range of power transmission and distribution applications. The use of active converter technologies within these networks is a key enabler for these benefits to be realised, however their integration can lead to exceptionally demanding electrical fault protection requirements, both in terms of speed and fault discrimination. This paper describes a novel fault detection method which exceeds the capability of many current protection methods in order to meet these requirements. The method utilises fundamental characteristics of the converter filter capacitance’s response to electrical system faults to estimate fault location through a measurement of fault path inductance. Crucially, the method has the capability to detect and discriminate fault location within microseconds of the fault occurring, facilitating its rapid removal from the network