Optimal operation of hybrid AC/DC microgrids under uncertainty of renewable energy resources : A comprehensive review

The hybrid AC/DC microgrids have become considerably popular as they are reliable, accessible and robust. They are utilized for solving environmental, economic, operational and power-related political issues. Having this increased necessity taken into consideration, this paper performs a comprehensive review of the fundamentals of hybrid AC/DC microgrids and describes their components. Mathematical models and valid comparisons among different renewable energy sources’ generations are discussed. Subsequently, various operational zones, control and optimization methods, power flow calculations in the presence of uncertainties related to renewable energy resources are reviewed.fi=vertaisarvioitu|en=peerReviewed

Development Schemes of Electric Vehicle Charging Protocols and Implementation of Algorithms for Fast Charging under Dynamic Environments Leading towards Grid-to-Vehicle Integration

This thesis focuses on the development of electric vehicle (EV) charging protocols under a dynamic environment using artificial intelligence (AI), to achieve Vehicle-to-Grid (V2G) integration and promote automobile electrification. The proposed framework comprises three major complementary steps. Firstly, the DC fast charging scheme is developed under different ambient conditions such as temperature and relative humidity. Subsequently, the transient performance of the controller is improved while implementing the proposed DC fast charging scheme. Finally, various novel techno-economic scenarios and case studies are proposed to integrate EVs with the utility grid. The proposed novel scheme is composed of hierarchical stages; In the first stage, an investigation of the temperature or/and relative humidity impact on the charging process is implemented using the constant current-constant voltage (CC-CV) protocol. Where the relative humidity impact on the charging process was not investigated or mentioned in the literature survey. This was followed by the feedforward backpropagation neural network (FFBP-NN) classification algorithm supported by the statistical analysis of an instant charging current sample of only 10 seconds at any ambient condition. Then the FFBP-NN perfectly estimated the EV’s battery terminal voltage, charging current, and charging interval time with an error of 1% at the corresponding temperature and relative humidity. Then, a nonlinear identification model of the lithium-polymer ion battery dynamic behaviour is introduced based on the Hammerstein-Wiener (HW) model with an experimental error of 1.1876%. Compared with the CC-CV fast charging protocol, intelligent novel techniques based on the multistage charging current protocol (MSCC) are proposed using the Cuckoo optimization algorithm (COA). COA is applied to the Hierarchical technique (HT) and the Conditional random technique (CRT). Compared with the CC-CV charging protocol, an improvement in the charging efficiency of 8% and 14.1% was obtained by the HT and the CRT, respectively, in addition to a reduction in energy losses of 7.783% and 10.408% and a reduction in charging interval time of 18.1% and 22.45%, respectively. The stated charging protocols have been implemented throughout a smart charger. The charger comprises a DC-DC buck converter controlled by an artificial neural network predictive controller (NNPC), trained and supported by the long short-term memory neural network (LSTM). The LSTM network model was utilized in the offline forecasting of the PV output power, which was fed to the NNPC as the training data. The NNPC–LSTM controller was compared with the fuzzy logic (FL) and the conventional PID controllers and perfectly ensured that the optimum transient performance with a minimum battery terminal voltage ripple reached 1 mV with a very high-speed response of 1 ms in reaching the predetermined charging current stages. Finally, to alleviate the power demand pressure of the proposed EV charging framework on the utility grid, a novel smart techno-economic operation of an electric vehicle charging station (EVCS) in Egypt controlled by the aggregator is suggested based on a hierarchical model of multiple scenarios. The deterministic charging scheduling of the EVs is the upper stage of the model to balance the generated and consumed power of the station. Mixed-integer linear programming (MILP) is used to solve the first stage, where the EV charging peak demand value is reduced by 3.31% (4.5 kW). The second challenging stage is to maximize the EVCS profit whilst minimizing the EV charging tariff. In this stage, MILP and Markov Decision Process Reinforcement Learning (MDP-RL) resulted in an increase in EVCS revenue by 28.88% and 20.10%, respectively. Furthermore, the grid-to-vehicle (G2V) and vehicle-to-grid (V2G) technologies are applied to the stochastic EV parking across the day, controlled by the aggregator to alleviate the utility grid load demand. The aggregator determined the number of EVs that would participate in the electric power trade and sets the charging/discharging capacity level for each EV. The proposed model minimized the battery degradation cost while maximizing the revenue of the EV owner and minimizing the utility grid load demand based on the genetic algorithm (GA). The implemented procedure reduced the degradation cost by an average of 40.9256%, increased the EV SOC by 27%, and ensured an effective grid stabilization service by shaving the load demand to reach a predetermined grid average power across the day where the grid load demand decreased by 26.5% (371 kW)

Recent Advances in Model-Based Fault Diagnosis for Lithium-Ion Batteries: A Comprehensive Review

Lithium-ion batteries (LIBs) have found wide applications in a variety of fields such as electrified transportation, stationary storage and portable electronics devices. A battery management system (BMS) is critical to ensure the reliability, efficiency and longevity of LIBs. Recent research has witnessed the emergence of model-based fault diagnosis methods in advanced BMSs. This paper provides a comprehensive review on the model-based fault diagnosis methods for LIBs. First, the widely explored battery models in the existing literature are classified into physics-based electrochemical models and electrical equivalent circuit models. Second, a general state-space representation that describes electrical dynamics of a faulty battery is presented. The formulation of the state vectors and the identification of the parameter matrices are then elaborated. Third, the fault mechanisms of both battery faults (incl. overcharege/overdischarge faults, connection faults, short circuit faults) and sensor faults (incl. voltage sensor faults and current sensor faults) are discussed. Furthermore, different types of modeling uncertainties, such as modeling errors and measurement noises, aging effects, measurement outliers, are elaborated. An emphasis is then placed on the observer design (incl. online state observers and offline state observers). The algorithm implementation of typical state observers for battery fault diagnosis is also put forward. Finally, discussion and outlook are offered to envision some possible future research directions.Comment: Submitted to Renewable and Sustainable Energy Reviews on 09-Jan-202

Optimal Planning of PV and Battery Resources in Remote Microgrids Considering Degradation Costs: An Iterative Post-Optimization Correction-based Approach

The benefits of shifting to renewable energy sources have granted microgrids considerable attention, especially photovoltaic (PV) systems. However, given the inherent variable and intermittent nature of solar power, battery energy storage systems (BESS) are pivotal for a reliable and cost-effective microgrid. The optimal sizing and energy scheduling of PV and BESS pose significant importance for minimal investment and operational cost. The associated costs of degradation for both these sources further add complexity to the overall planning problem. This paper proposes a microgrid resource planning model for determining the optimal PV and BESS sizes in combination with natural gas generators, considering their technical and financial characteristics as well as the degradation costs of both PV and BESS. Its objective is to minimize the microgrid-wide total operational and capital cost. The optimization model is formulated using mixed-integer linear programming to ensure the resource sizing problem converges with a reasonably small optimality gap. In addition, an iterative post-optimization BESS degradation cost correction algorithm is proposed for enhanced accuracy. The results showcase the savings in the overall objective cost and reductions in solar energy curtailment upon BESS's inclusion

Control Analysis for Grid Tied Battery Energy Storage System for SOC and SOH Management

Frequency regulation is an important part of grid ancillary services in the UK power system to mitigate the impacts of variable energy resources and uncertainty of load on system frequency. The National Grid Electricity Transmission (NGET), the primary electricity transmission network operator in the UK, is introduced various frequency response services such as firm frequency response (FFR) and the new fast enhanced frequency response (EFR), which are designed to provide real-time response to deviations in the grid frequency. Flexible and fast response capabilities of battery energy storage systems (BESSs) make them an ideal choice to provide grid frequency regulation. This thesis presents control algorithms for a BESS to deliver a charge/discharge power output in response to deviations in the grid frequency with respect to the requisite service specifications, while managing the state-of-charge (SOC) of the BESS to optimize the availability of the system. Furthermore, this thesis investigates using the BESS in order to maximize triad avoidance benefit revenues while layering UK grid frequency response services. Using historical UK electricity prices, a balancing service scheduling approach is introduced to maximize energy arbitrage revenue by layering different types of grid balancing services, including EFR and FFR, throughout the day. Simulation results demonstrate that the proposed algorithm delivers both dynamic and non-dynamic FFR and also EFR to NGET required service specifications while generating arbitrage revenue as well as service availability payments in the balancing market. In this thesis, a new fast cycle counting method (CCM) considering the effect of current rate (C-rate), SOC and depth-of-discharge (DOD) on battery lifetime for grid-tied BESS is presented. The methodology provides an approximation for the number of battery charge-discharge cycles based on historical microcyling SOC data typical of BESS frequency regulation operation. The EFR and FFR algorithms are used for analysis. The obtained historical SOC data from the analysis are then considered as an input for evaluating the proposed CCM. Utilizing the Miner Rule’s degradation analysis method, lifetime analysis based on battery cycling is also provided for a lithium-titanate (LTO) and lithium-nickel-manganese-cobalt-oxide (NMC) battery. The work in this thesis is supported by experimental results from the 2MW/1MWh Willenhall Energy Storage System (WESS) to validate the models and assess the accuracy of the simulation results

A critical review of online battery remaining useful lifetime prediction methods.

Lithium-ion batteries play an important role in our daily lives. The prediction of the remaining service life of lithium-ion batteries has become an important issue. This article reviews the methods for predicting the remaining service life of lithium-ion batteries from three aspects: machine learning, adaptive filtering, and random processes. The purpose of this study is to review, classify and compare different methods proposed in the literature to predict the remaining service life of lithium-ion batteries. This article first summarizes and classifies various methods for predicting the remaining service life of lithium-ion batteries that have been proposed in recent years. On this basis, by selecting specific criteria to evaluate and compare the accuracy of different models, find the most suitable method. Finally, summarize the development of various methods. According to the research in this article, the average accuracy of machine learning is 32.02% higher than the average of the other two methods, and the prediction cycle is 9.87% shorter than the average of the other two methods

Critical review on improved electrochemical impedance spectroscopy-cuckoo search-elman neural network modeling methods for whole-life-cycle health state estimation of lithium-ion battery energy storage systems.

Efficient and accurate health state estimation is crucial for lithium-ion battery (LIB) performance monitoring and economic evaluation. Effectively estimating the health state of LIBs online is the key but is also the most difficult task for energy storage systems. With high adaptability and applicability advantages, battery health state estimation based on data-driven techniques has attracted extensive attention from researchers around the world. Artificial neural network (ANN)-based methods are often used for state estimations of LIBs. As one of the ANN methods, the Elman neural network (ENN) model has been improved to estimate the battery state more efficiently and accurately. In this paper, an improved ENN estimation method based on electrochemical impedance spectroscopy (EIS) and cuckoo search (CS) is established as the EIS-CS-ENN model to estimate the health state of LIBs. Also, the paper conducts a critical review of various ANN models against the EIS-CS-ENN model. This demonstrates that the EIS-CS-ENN model outperforms other models. The review also proves that, under the same conditions, selecting appropriate health indicators (HIs) according to the mathematical modeling ability and state requirements are the keys in estimating the health state efficiently. In the calculation process, several evaluation indicators are adopted to analyze and compare the modeling accuracy with other existing methods. Through the analysis of the evaluation results and the selection of HIs, conclusions and suggestions are put forward. Also, the robustness of the EIS-CS-ENN model for the health state estimation of LIBs is verified

Battery Systems and Energy Storage beyond 2020

Currently, the transition from using the combustion engine to electrified vehicles is a matter of time and drives the demand for compact, high-energy-density rechargeable lithium ion batteries as well as for large stationary batteries to buffer solar and wind energy. The future challenges, e.g., the decarbonization of the CO2-intensive transportation sector, will push the need for such batteries even more. The cost of lithium ion batteries has become competitive in the last few years, and lithium ion batteries are expected to dominate the battery market in the next decade. However, despite remarkable progress, there is still a strong need for improvements in the performance of lithium ion batteries. Further improvements are not only expected in the field of electrochemistry but can also be readily achieved by improved manufacturing methods, diagnostic algorithms, lifetime prediction methods, the implementation of artificial intelligence, and digital twins. Therefore, this Special Issue addresses the progress in battery and energy storage development by covering areas that have been less focused on, such as digitalization, advanced cell production, modeling, and prediction aspects in concordance with progress in new materials and pack design solutions