New Technology and Techniques for Needle-Based Magnetic Resonance Image-Guided Prostate Focal Therapy

The most common diagnosis of prostate cancer is that of localized disease, and unfortunately the optimal type of treatment for these men is not yet certain. Magnetic resonance image (MRI)-guided focal laser ablation (FLA) therapy is a promising potential treatment option for select men with localized prostate cancer, and may result in fewer side effects than whole-gland therapies, while still achieving oncologic control. The objective of this thesis was to develop methods of accurately guiding needles to the prostate within the bore of a clinical MRI scanner for MRI-guided FLA therapy. To achieve this goal, a mechatronic needle guidance system was developed. The system enables precise targeting of prostate tumours through angulated trajectories and insertion of needles with the patient in the bore of a clinical MRI scanner. After confirming sufficient accuracy in phantoms, and good MRI-compatibility, the system was used to guide needles for MRI-guided FLA therapy in eight patients. Results from this case series demonstrated an improvement in needle guidance time and ease of needle delivery compared to conventional approaches. Methods of more reliable treatment planning were sought, leading to the development of a systematic treatment planning method, and Monte Carlo simulations of needle placement uncertainty. The result was an estimate of the maximum size of focal target that can be confidently ablated using the mechatronic needle guidance system, leading to better guidelines for patient eligibility. These results also quantified the benefit that could be gained with improved techniques for needle guidance

Image Guided Robots for Urology

This dissertation addresses the development of medical image-guided robots and their applications in urology. Image-guided robots integrate medical image information with robotic precision to assist the planning and execution of the image-guided interventions. Robots guided by two different image modalities, ultrasound and MR image, were developed. Ultrasound image-guided robots manipulate an ultrasound probe and a needle-guide that are calibrated with respect to the robot for image-guided targeting. A method for calibration was developed and verified through the image-guided targeting experiments. Robotic manipulation of the calibrated probe allows acquisition of image slices at precise location, which can be combined to generate a 3D ultrasound image. Software for 3D ultrasound image acquisition, processing, and segmentation was developed as a part of the image-guided robot system. The feasibility of several image-guided intervention procedures using the ultrasound image-guided robot system was tested. The robot was used in a clinical trial of intraoperative transrectal ultrasound (TRUS) guided prostatectomy. The accuracy of TRUS-guided prostate biopsy using the robot was evaluated in a comparative study versus the classic human operation of the probe. Robot controlled palpation and image processing methods were developed for ultrasound elastography imaging of the prostate. An ultrasound to CT image-fusion method using the robot as a common reference was developed for percutaneous access of the kidney. MRI-guided robots were developed for transrectal and transperineal prostate biopsy. Extensive in-vitro tests were performed to ensure MRI compatibility and image-guided accuracy of the robots. The transrectal robot was evaluated in an animal study and the transperineal robot is undergoing a clinical trial. The collection of methods and algorithms presented in this dissertation can contribute to the development of image-guided robots that may provide less invasive and more precise interventions in urology, interventional radiology, and other fields

Image-Guided Robot-Assisted Needle Intervention Devices and Methods to Improve Targeting Accuracy

This dissertation addresses the development of medical devices, image-guided robots, and their application in needle-based interventions, as well as methods to improve accuracy and safety in clinical procedures. Needle access is an essential component of minimally invasive diagnostic and therapeutic procedures. Image-guiding devices are often required to help physicians handle the needle based on the images. Integrating robotic accuracy and precision with digital medical imaging has the potential to improve the clinical outcomes. The dissertation presents two robotic devices for interventions under Magnetic Resonance Imaging (MRI) respectively Computed Tomography (CT) – Ultrasound(US) cross modality guidance. The MRI robot is a MR Safe Remote Center of Motion (RCM) robot for direct image-guided needle interventions such as brain surgery. The dissertation also presents the integration of the robot with an intraoperative MRI scanner, and preclinical tests for deep brain needle access. The CT-Ultrasound guidance uses a robotic manipulator to handle an US probe within a CT scanner. The dissertation presents methods related to the co-registration of multi-image spaces with an intermediary frame, experiments for needle targeting. The dissertation also presents method on using optical tracking measurements specifically for medical robots. The method was derived to test the robots presented above. With advanced image-guidance, such as the robotic approaches, needle targeting accuracy may still be deteriorated by errors related to needle defections. Methods and associated devices for needle steering on the straight path are presented. These are a robotic approach that uses real-time ultrasound guidance to steer the needle; Modeling and testing of a method to markedly reduce targeting errors with bevel-point needles; Dynamic design, manufacturing, and testing of a novel core biopsy needle with straighter path, power assistance, reduced noise, and safer operation. Overall, the dissertation presents several developments that contribute to the field of medical devices, image-guided robots, and needle interventions. These include robot testing methods that can be used by other researchers, needle steering methods that can be used directly by physicians or for robotic devices, as well as several methods to improve the accuracy in image-guided interventions. Collectively, these contribute to the field and may have a significant clinical impact

Minimally invasive therapies for the brain using magnetic particles

Delivering a therapy with precision, while reducing off target effects is key to the success of any novel therapeutic intervention. This is of most relevance in the brain, where the preservation of surrounding healthy tissue is crucial in reducing the risk of cognitive impairment and improving patient prognosis. Our scientific understanding of the brain would also benefit from minimally invasive investigations of specific cell types so that they may be observed in their most natural physiological environment. Magnetic particles based techniques have the potential to deliver cellular precision in a minimally invasive manner. When inside the body, Magnetic particles can be actuated remotely using externally applied magnetic fields while their position can be detected non-invasively using MRI. The magnetic forces applied to the particles however, rapidly decline with increasing distance from the magnetic source. It is therefore critical to understand the amount of force needed for a particular application. The properties of the magnetic particle such as the size, shape and magnetic content, as well as the properties of the applied magnetic field, can then be tailored to that application. The aim of this thesis was to develop magnetic particle based techniques for precise manipulation of cells in the brain. Two different approaches were explored, utilising the versatile nature of magnetic actuation for two different applications. The first approach uses magnetic nanoparticles to mechanically stimulate a specific cell type. Magnetic particles conjugated with the antibody ACSA-1 would selectively bind to astrocytes to evoke the controlled release of ATP and induce a calcium flux which are used for communication with neighbouring cells. This approach allows for the investigation into the role of astrocytes in localised brain regions using a naturally occurring actuation process (mechanical force) without effecting their natural environment. The second approach uses a millimetre sized magnetic particle which can be navigated through the brain and ablate localised regions of cells using a magnetic resonance imaging system. The magnetic particle causes a distinct contrast in MRI images, allowing for precise detection of its location so that it may be iteratively guided along a pre-determined path to avoid eloquent brain regions. Once at the desired location, an alternating magnetic field can be applied causing the magnetic particle to heat and deliver controllable, well defined regions of cell death. The forces needed for cell stimulation are orders of magnitude less than the forces needed to guide particles through the brain. Chapters 4 and 5 use external magnets to deliver forces in the piconewton range. While stimulation was demonstrated in small animals, scaling up this technique to human proportions remains a challenge. Chapters 6 and 7 use a preclinical MRI system to generate forces in the millinewton range, allowing the particle to be moved several centimetres through the brain within a typical surgical timescale. When inside the scanner, an alternating magnetic field causes the particle to heat rapidly, enabling the potential for multiple ablations within a single surgery. For clinical translation of this technique, MRI scanners would require a dedicated propulsion gradient set and heating coil

Design and Development of a Surgical Robot for Needle-Based Medical Interventions

Lung cancer is the leading cause of cancer related deaths. If diagnosed in a timely manner, the treatment of choice is surgical resection of the cancerous lesions followed by radiotherapy. However, surgical resection may be too invasive for some patients due to old age or weakness. An alternative is minimally invasive needle-based interventions for cancer diagnosis and treatment. This project describes the design, analysis, development and experimental evaluation of a modular, compact, patient-mounted robotic manipulator for lung cancer diagnosis and treatment. In this regard, a novel parallel Remote Centre of Motion (RCM) mechanism is proposed for minimally invasive delivery of needle-based interventions. The proposed robot provides four degrees of freedom (DOFs) to orient and move a surgical needle within a spherical coordinate system. There is an analytical solution for the kinematics of the proposed parallel mechanism and the end-effectors motion is well-conditioned within the required workspace. The RCM is located beneath the skin surface to minimize the invasiveness of the surgical procedure while providing the required workspace to target the cancerous lesions. In addition, the proposed robot benefits from a design capable of measuring the interaction forces between the needle and the tissue. The experimental evaluation of the robot has proved its capability to accurately orient and move a surgical needle within the required workspace. Although this robotic system has been designed for the treatment of lung cancer, it is capable of performing other procedures in the thoracic or abdominal cavity such as liver cancer diagnosis and treatment

Image-guided robots for dot-matrix tumor ablation

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2010.Cataloged from PDF version of thesis.Includes bibliographical references (p. 203-208).Advances in medical imaging now provides detailed images of solid tumors inside the body and miniaturized energy delivery systems enable tumor destruction through local heating powered by a thin electrode. However, the use of thermal ablation as a first line of treatment is limited due to the difficulty in accurately matching a desired treatment and a limited region of active heating around an electrode. The purpose of this research is to identify and quantify the current limitations of image-guided interventional procedures and subsequently develop a procedure and devices to enable accurate and efficient execution of image-based interventional plans and thus ablation of a tumor of any shape with minimal damage to surrounding tissue. Current limitations of probe placement for ablation therapy were determined by a detailed retrospective study of 50 representative CT-guided procedures. On average, 21 CT scans were performed for a given procedure (range 11-38), with the majority devoted to needle orientation and insertion (mean number of scans was 54%) and trajectory planning (mean number of scans was 19%). A regression analysis yielded that smaller and deeper lesions were associated with a higher number of CT scans for needle orientation and insertion; highlighting the difficulty in targeting. Another challenge identified was repositioning the instrument distal tip within tissue. The first robot is a patient-mounted device that aligns an instrument along a desired trajectory via two motor-actuated concentric, crossed, and partially nested hoops. A carriage rides in the hoops and grips and inserts an instrument via a two degree-of-freedom friction drive. An imagebased point-and-click user interface relates appropriate clicks on the medical images to robot commands. Mounting directly on the patient provides a sufficiently stable and safe platform for actuation and eliminates the need to compensate for chest motion; thereby reducing the cost and complexity compared to other devices. Phantom experiments in a realistic clinical setting demonstrated a mean targeting accuracy of 3.5 mm with an average of five CT scans. The second robot is for repositioning the distal tip of a medical instrument to adjacent points within tissue. The steering mechanism is based on the concept of substantially straightening a pre-curved Nitinol stylet by retracting it into a concentric outer cannula, and re-deploying it at different axial and rotational cannula positions. The proximal end of the cannula is attached to the distal end of a screw-spline that enables it to be translated and rotated with respect to the casing. Translation of the stylet relative to the cannula is achieved with a second concentric, nested smaller diameter screw that is constrained to rotate with the cannula. The robot mechanism is compatible with the CT images, light enough to be supported on a patient's chest or attached to standard stereotactic frames. Targeting experiments in a gelatin phantom demonstrated a mean targeting error of 1.8 mm between the stylet tip and that predicted with a kinematic model. Ultimately, these types of systems are envisioned being used together as part of a highly dexterous patient-mounted positioning platform that can accurately perform ablation of large and irregularly shaped tumors inside medical imaging machines - offering the potential to replace expensive and traumatic surgeries with minimally invasive out-patient procedures.by Conor James Walsh.Ph.D

Intraoperative Navigation Systems for Image-Guided Surgery

Recent technological advancements in medical imaging equipment have resulted in a dramatic improvement of image accuracy, now capable of providing useful information previously not available to clinicians. In the surgical context, intraoperative imaging provides a crucial value for the success of the operation. Many nontrivial scientific and technical problems need to be addressed in order to efficiently exploit the different information sources nowadays available in advanced operating rooms. In particular, it is necessary to provide: (i) accurate tracking of surgical instruments, (ii) real-time matching of images from different modalities, and (iii) reliable guidance toward the surgical target. Satisfying all of these requisites is needed to realize effective intraoperative navigation systems for image-guided surgery. Various solutions have been proposed and successfully tested in the field of image navigation systems in the last ten years; nevertheless several problems still arise in most of the applications regarding precision, usability and capabilities of the existing systems. Identifying and solving these issues represents an urgent scientific challenge. This thesis investigates the current state of the art in the field of intraoperative navigation systems, focusing in particular on the challenges related to efficient and effective usage of ultrasound imaging during surgery. The main contribution of this thesis to the state of the art are related to: Techniques for automatic motion compensation and therapy monitoring applied to a novel ultrasound-guided surgical robotic platform in the context of abdominal tumor thermoablation. Novel image-fusion based navigation systems for ultrasound-guided neurosurgery in the context of brain tumor resection, highlighting their applicability as off-line surgical training instruments. The proposed systems, which were designed and developed in the framework of two international research projects, have been tested in real or simulated surgical scenarios, showing promising results toward their application in clinical practice

Investigating Ultrasound-Guided Autonomous Assistance during Robotic Minimally Invasive Surgery

Despite it being over twenty years since the first introduction of robotic surgical systems in common surgical practice, they are still far from widespread across all healthcare systems, surgical disciplines and procedures. At the same time, the systems that are used act as mere tele-manipulators with motion scaling and have yet to make use of the immense potential of their sensory data in providing autonomous assistance during surgery or perform tasks themselves in a semi-autonomous fashion. Equivalently, the potential of using intracorporeal imaging, particularly Ultrasound (US) during surgery for improved tumour localisation remains largely unused. Aside from the cost factors, this also has to do with the necessity of adequate training for scan interpretation and the difficulty of handling an US probe near the surgical sight. Additionally, the potential for automation that is being explored in extracorporeal US using serial manipulators does not yet translate into ultrasound-enabled autonomous assistance in a surgical robotic setting. Motivated by this research gap, this work explores means to enable autonomous intracorporeal ultrasound in a surgical robotic setting. Based around the the da Vinci Research Kit (dVRK), it first develops a surgical robotics platform that allows for precise evaluation of the robot’s performance using Infrared (IR) tracking technology. Based on this initial work, it then explores the possibility to provide autonomous ultrasound guidance during surgery. Therefore, it develops and assesses means to improve kinematic accuracy despite manipulator backlash as well as enabling adequate probe position with respect to the tissue surface and anatomy. Founded on the acquired anatomical information, this thesis explores the integration of a second robotic arm and its usage for autonomous assistance. Starting with an autonomously acquired tumor scan, the setup is extended and methods devised to enable the autonomous marking of margined tumor boundaries on the tissue surface both in a phantom as well as in an ex-vivo experiment on porcine liver. Moving towards increased autonomy, a novel minimally invasive High Intensity Focused Ultrasound (HIFUS) transducer is integrated into the robotic setup including a sensorised, water-filled membrane for sensing interaction forces with the tissue surface. For this purpose an extensive material characterisation is caried out, exploring different surface material pairings. Finally, the proposed system, including trajectory planning and a hybrid-force position control scheme are evaluated in a benchtop ultrasound phantom trial

下腹部を対象とした極細針によるCTガイド下高正確度穿刺プランニング

早大学位記番号:新8149早稲田大

Development of positioning devices for MRI-guided high intensity focused ultrasound (HIFU) for abdominal, thyroid and brain, tumours

High intensity focused ultrasound (HIFU) is a promising technology for a variety of therapeutic applications. This concept initiated in 1942 by Lynn Zwemer [1]. HIFU has long been known as a minimal invasive or non-invasive procedure that destroys tissue through ablation. However, it is only in recent years that clinical applications are becoming feasible, with the development of high power ultrasound transducers compatible with the MRI scanner which is used to monitor these non-invasive HIFU applications. New technologies, combined with more sophisticated treatment methods and monitoring methods allow non-invasive procedures in many areas such as the brain, eye, breast, kidney, liver, pancreas, thyroid, uterine fibroids and pancreas. Meanwhile, new investigations are underway for treading cardiac arithmia, strokes, palliative pain treatment of bone metastases and brain disorders such as Parkinson’s disease, essential tremor, and neuropathic pain. These optimistic investigations have encouraged physicians and provided them new valuable tools for medical research