Electronic Systems : Noteboook of Lab Activities

Notebook of Lab Activities in english.Dossier de pràctiques en català.2015/201

Mixed-signal integrated circuits design and validation for automotive electronics applications

Automotive electronics is a fast growing market. In a field primarily dominated by mechanical or hydraulic systems, over the past few decades there has been exponential growth in the number of electronic components incorporated into automobiles. Partly thanks to the advance in high voltage smart power processes in nowadays cars is possible to integrate both power/high voltage electronics and analog/digital signal processing circuitry thus allowing to replace a lot of mechanical systems with electro-mechanical or fully electronic ones. High level modeling of complex electronic systems is gaining importance relatively to design space exploration, enabling shorter design and verification cycles, allowing reduced time-to-market. A high level model of a resistor string DAC to evaluate nonlinearities has been developed in MATLAB environment. As a test case for the model, a 10 bit resistive DAC in 0.18um is designed and the results were compared with the traditional transistor level approach. Then we face the analysis and design of a fundamental block: the bandgap voltage reference. Automotive requirements are tough, so the design of the voltage reference includes a pre-regulation part of the battery voltage that allows to enhance overall performances. Moreover an analog integrated driver for an automotive application whose architecture exploits today’s trends of analog-digital integration allowing a greater range of flexibility allowing high configurability and fast prototipization is presented. We covered also the mixed-signal verification approach. In fact, as complexity increases and mixed-signal systems become more and more pervasive, test and verification often tend to be the bottleneck in terms of time effort. A complete flow for mixed-signal verification using VHDL-AMS modeling and Python scripting is presented as an alternative to complex transistor level simulations. Finally conclusions are drawn

Analysis and design of a digital proportional-resonant controller for a single-phase bidirectional LC rectifier

Nowadays, bidirectional rectifiers with near unity power factor (PF) are used extensively. This work studies a quite singular topology: a dc-dc boost converter connected to the ac grid through a series capacitor. The capacitor function is biasing the ac network voltage to obtain a positive voltage for any time feeding the dc-dc boost converter. This approach can be used with any of the basic dc-dc topologies although, in this work, only the boost topology is considered. The converter dynamics is analyzed in open loop and a controller is proposed to obtain the desired valueA boost high-power-factor ac/dc converter is designed. The converter presents a bi-directional power flow capability. A bias capacitor connected in series with the ac source provides a dc voltage boost at the input. Accordingly, a voltage that is always positive is applied at the input of a conventional boost dc/dc converter. A bi-directional dc/dc boost converter is employed to couple the ac side with the dc output. The converter can be controlled with a sinusoidal average current at the ac side that is either in phase or 180o out of phase with the ac source. Therefore, this design can works with an unity power factor in rectification mode or inversion mode. The topology was employed for the design of an ac/dc battery charger with a unity power factor for rated power of 2 kVA. IGBT devices with anti-parallel diodes are used as switches. Replacing the diode bridge it can eliminates crossover distortions that are inevitable in a conventional Active Power Factor Correction (APFC) circuit with diode rectification bridge at its front end. Removing the diode bridge and usage of two bi-directional switches allows for bi-directional instantaneous power flow which makes possible operation in the inversion mode, in which power is transferred from the dc source to the ac source. At any instance of time only one semiconductor device conducts (as opposed to three or two in conventional rectifiers), which results in higher efficiency. The proper design of the control loops guaranties the output voltage regulation and operation with a unity power factor and low harmonic distortion despite to the load variations or the grid harmonic contents

INVESTIGATION OF STARTING BEHAVIOUR OF A FREE PISTON LINEAR GENERATOR ENGINE

The current global crisis is now wrapped around the transportation industry whereby emissions and fuel prices are increasing. It is clear that the transportation system have polluted globally with CO, NOx and soot. Due to the reasons mentioned, environmental policymakers have created laws that limit the emission level produced by the internal combustion engine. As a result, it pushes researchers to develop new methods and technologies to tackle this problem and to come up with a highly efficient internal combustion engine with lower emissions. A two-stroke free piston linear-generator engine (FPLG) as prime mover for electric power generation has been developed to address these issues. A linear engine coupled to a permanentmagnet assembly becomes a linear-generator (LG) which can produce electrical power. Its working principle is based on the free-piston two-stroke engine with direct injection

Advancement on the Susceptibility of Analog Front-Ends to EMI

L'abstract è presente nell'allegato / the abstract is in the attachmen

Silicon carbide technology for extreme environments

PhD ThesisWith mankind’s ever increasing curiosity to explore the unknown, including a variety of hostile environments where we cannot tread, there exists a need for machines to do work on our behalf. For applications in the most extreme environments and applications silicon based electronics cannot function, and there is a requirement for circuits and sensors to be built from wide band gap materials capable of operation in these domains. This work addresses the initial development of silicon carbide circuits to monitor conditions and transmit information from such hostile environments. The characterisation, simulation and implementation of silicon carbide based circuits utilising proprietary high temperature passives is explored. Silicon carbide is a wide band gap semiconductor material with highly suitable properties for high-power, high frequency and high temperature applications. The bandgap varies depending on polytype, but the most commonly used polytype 4H, has a value of 3.265 eV at room temperature, which reduces as the thermal ionization of electrons from the valence band to the conduction band increases, allowing operation in ambient up to 600°C. Whilst silicon carbide allows for the growth of a native oxide, the quality has limitations and therefore junction field effect transistors (JFETs) have been utilised as the switch in this work. The characteristics of JFET devices are similar to those of early thermionic valve technology and their use in circuits is well known. In conjunction with JFETs, Schottky barrier diodes (SBDs) have been used as both varactors and rectifiers. Simulation models for high temperature components have been created through their characterisation of their electrical parameters at elevated temperatures. The JFETs were characterised at temperatures up to 573K, and values for TO V , β , λ , IS , RS and junction capacitances were extracted and then used to mathematically describe the operation of circuits using SPICE. The transconductance of SiC JFETs at high temperatures has been shown to decrease quadratically indicating a strong dependence upon carrier mobility in the channel. The channel resistance also decreased quadratically as a direct result of both electric field and temperature enhanced trap emission. The JFETs were tested to be operational up to 775K, where they failed due to delamination of an external passivation layer. ii Schottky diodes were characterised up to 573K, across the temperature range and values for ideality factor, capacitance, series resistance and forward voltage drop were extracted to mathematically model the devices. The series resistance of a SiC SBD exhibited a quadratic relationship with temperature indicating that it is dominated by optical phonon scattering of charge carriers. The observed deviation from a temperature independent ideality factor is due to the recombination of carriers in the depletion region affected by both traps and the formation of an interfacial layer at the SiC/metal interface. To compliment the silicon carbide active devices utilised in this work, high temperature passive devices and packaging/circuit boards were developed. Both HfO2 and AlN materials were investigated for use as potential high temperature capacitor dielectrics in metal-insulator-metal (MIM) capacitor structures. The different thicknesses of HfO2 (60nm and 90nm) and 300nm for AlN and the relevance to fabrication techniques are examined and their effective capacitor behaviour at high temperature explored. The HfO2 based capacitor structures exhibited high levels of leakage current at temperatures above 100°C. Along with elevated leakage when subjected to higher electric fields. This current leakage is due to the thin dielectric and high defect density and essentially turns the capacitors into high value resistors in the order of MΩ. This renders the devices unsuitable as capacitors in hostile environments at the scales tested. To address this issue AlN capacitors with a greater dielectric film thickness were fabricated with reduced leakage currents in comparison even at an electric field of 50MV/cm at 600K. The work demonstrated the world’s first high temperature wireless sensor node powered using energy harvesting technology, capable of operation at 573K. The module demonstrated the world’s first amplitude modulation (AM) and frequency modulation (FM) communication techniques at high temperature. It also demonstrated a novel high temperature self oscillating boost converter cable of boosting voltages from a thermoelectric generator also operating at this temperature. The AM oscillator operated at a maximum temperature of 553K and at a frequency of 19.4MHz with a signal amplitude 65dB above background noise. Realised from JFETs and HfO2 capacitors, modulation of the output signal was achieved by varying the load resistance by use of a second SiC JFET. By applying a negative signal voltage of between -2.5 and -3V, a 50% reduction in the signal amplitude and therefore Amplitude Modulation was achieved by modulating the power within the oscillator through the use of this secondary JFET. Temperature drift in the characteristics were also observed, iii with a decrease in oscillation frequency of almost 200 kHz when the temperature changed from 300K to 573K. This decrease is due to the increase in capacitance density of the HfO2 MIM capacitors and increasing junction capacitances of the JFET used as the amplifier within the oscillator circuit. Direct frequency modulation of a SiC Voltage Controlled Oscillator was demonstrated at a temperature of 573K with a oscillation frequency of 17MHz. Realised from an SiC JFET, AlN capacitors and a SiC SBD used as a varactor. It was possible to vary the frequency of oscillations by 100 kHz with an input signal no greater than 1.5V being applied to the SiC SBD. The effects of temperature drift were more dramatic in comparison to the AM circuit at 400 kHz over the entire temperature range, a result of the properties of the AlN film which causes the capacitors to increase in capacitance density by 10%. A novel self oscillating boost converter was commissioned using a counter wound transformer on high temperature ferrite, a SiC JFET and a SiC SBD. Based upon the operation of a free running blocking oscillator, oscillatory behaviour is a result of the electric and magnetic variations in the winding of the transformer and the amplification characteristics of a JFET. It demonstrated the ability to boost an input voltage of 1.3 volts to 3.9 volts at 573K and exhibited an efficiency of 30% at room temperature. The frequency of operation was highly dependent upon the input voltage due to the increased current flow through the primary coil portion of the transformer and the ambient temperature causing an increase in permeability of the ferrite, thus altering the inductance of both primary and secondary windings. However due its simplicity and its ability to boost the input voltage by 250% meant it was capable of powering the transmitters and in conjunction with a Themoelectric Generator so formed the basis for a self powered high temperature silicon carbide sensor node. The demonstration of these high temperature circuits provide the initial stages of being able to produce a high temperature wireless sensor node capable of operation in hostile environments. Utilising the self oscillating boost converter and a high temperature Thermoelectric Generator these prototype circuits were showed the ability to harvest energy from the high temperature ambient and power the silicon carbide circuitry. Along with appropriate sensor technology it demonstrated the feasibility of being able to monitor and transmit information from hazardous locations which is currently unachievable

An Assessment of Integrated Flywheel System Technology

The current state of the technology in flywheel storage systems and ancillary components, the technology in light of future requirements, and technology development needs to rectify these shortfalls were identified. Technology efforts conducted in Europe and in the United States were reviewed. Results of developments in composite material rotors, magnetic suspension systems, motor/generators and electronics, and system dynamics and control were presented. The technology issues for the various disciplines and technology enhancement scenarios are discussed. A summary of the workshop, and conclusions and recommendations are presented

Improving RF Localization Through Measurement and Manipulation of the Channel Impulse Response

For over twenty years, global navigation satellite systems like GPS have provided an invaluable navigation, tracking, and time synchronization service that is used by people, wildlife, and machinery. Unfortunately, the coverage and accuracy of GPS is diminished or lost when brought indoors since GPS signals experience attenuation and distortion after passing through and reflecting off of building materials. This disparity in coverage coupled with growing demands for indoor positioning, navigation, and tracking has led to a plethora of research in localization technologies. To date, however, no single system has emerged as a clear solution to the indoor localization and navigation problem because the myriad of potential applications have widely varying performance requirements and design constraints that no system satisfies. Fortunately, recently-introduced commercial ultra-wideband RF hardware offers excellent ranging accuracy in difficult indoor settings, but these systems lack the robustness and simplicity needed for many indoor applications. We claim that an asymmetric design that separates transmit and receive functions can enable many of the envisioned applications not currently realizable with an integrated design. This separation of functionality allows for a flexible architecture which is more robust to the in-band interference and heavy multipath commonly found in indoor environments. In this dissertation, we explore the size, weight, accuracy, and power requirements imposed on tracked objects (tags) for three broadly representative applications and propose the design of fixed-location infrastructure (anchors) that accurately and robustly estimate a tag’s location, while minimizing deployment complexity and adhering to a unified system architecture. Enabled applications range from 3D tracking of small, fast-moving micro-quadrotors to 2D personal navigation across indoor maps to tracking objects that remain stationary for long periods of time with near-zero energy cost. Each application requires careful measurement of the ultra-wideband channel impulse response, and an augmented narrowband receiver is proposed to perform these measurements. The key design principle is to offload implementation complexity to static infrastructure where an increase in cost and complexity can be more easily absorbed and amortized. Finally, with an eye towards the future, we explore how the increasingly crowded RF spectrum impacts current ultra-wideband system design, and propose an alternative architecture that enables improved coexistence of narrowband and ultra-wideband transmissions.PHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/138642/1/bpkempke_1.pd

Integrated RF oscillators and LO signal generation circuits

This thesis deals with fully integrated LC oscillators and local oscillator (LO) signal generation circuits. In communication systems a good-quality LO signal for up- and down-conversion in transmitters is needed. The LO signal needs to span the required frequency range and have good frequency stability and low phase noise. Furthermore, most modern systems require accurate quadrature (IQ) LO signals. This thesis tackles these challenges by presenting a detailed study of LC oscillators, monolithic elements for good-quality LC resonators, and circuits for IQ-signal generation and for frequency conversion, as well as many experimental circuits. Monolithic coils and variable capacitors are essential, and this thesis deals with good structures of these devices and their proper modeling. As experimental test devices, over forty monolithic inductors and thirty varactors have been implemented, measured and modeled. Actively synthesized reactive elements were studied as replacements for these passive devices. At first glance these circuits show promising characteristics, but closer noise and nonlinearity analysis reveals that these circuits suffer from high noise levels and a small dynamic range. Nine circuit implementations with various actively synthesized variable capacitors were done. Quadrature signal generation can be performed with three different methods, and these are analyzed in the thesis. Frequency conversion circuits are used for alleviating coupling problems or to expand the number of frequency bands covered. The thesis includes an analysis of single-sideband mixing, frequency dividers, and frequency multipliers, which are used to perform the four basic arithmetical operations for the frequency tone. Two design cases are presented. The first one is a single-sideband mixing method for the generation of WiMedia UWB LO-signals, and the second one is a frequency conversion unit for a digital period synthesizer. The last part of the thesis presents five research projects. In the first one a temperature-compensated GaAs MESFET VCO was developed. The second one deals with circuit and device development for an experimental-level BiCMOS process. A cable-modem RF tuner IC using a SiGe process was developed in the third project, and a CMOS flip-chip VCO module in the fourth one. Finally, two frequency synthesizers for UWB radios are presented

Design and Development of a Multi-Frequency System for Microwave Heating

[ES] La utilización de sistemas de microondas para aplicaciones de calentamiento está muy extendida, principalmente por su uso en el calentamiento doméstico. El volumen de ventas del horno de microondas doméstico refleja un dato curioso: es el electrodoméstico más vendido en el mundo cada año. Por ello, el coste de producción del elemento principal, el magnetrón, presenta unos márgenes de beneficio imbatibles. Sin embargo, los avances en la fabricación de generadores de RF de alta potencia de estado sólido han puesto de manifiesto no solo las limitaciones de los sistemas basados en magnetrón sino también las grandes ventajas de la tecnología de transistores. Actualmente, los amplificadores de potencia de estado sólido han alcanzado una madurez suficiente como para competir en eficiencia, coste y calidad de la onda generada con el magnetrón. Las principales ventajas de los transistores son un reducido tamaño, tensiones de alimentación bajas, un espectro puro en frecuencia, un mayor tiempo de vida y el control digital directo. Los sistemas de microondas con esta tecnología están siendo introducidos en el mercado desde hace diez años, aunque las aplicaciones reales que los utilizan son escasas. La principal razón es la falta de diseños de aplicadores específicos para sacar el máximo provecho a las fuentes de estado sólido. , por tanto, es éste el objetivo de la tesis doctoral. Los sistemas S2MH (Solid-State Microwave Heating) se presentan en esta disertación doctoral como una alternativa que ofrece un calentamiento mejorado. La posibilidad de seleccionar la frecuencia exacta, ajustar la potencia de salida y realizar barridos de fase de forma coherente con múltiples iluminadores proporcionan al sistema un control preciso del proceso de calentamiento. El resultado directo de éste es un calentamiento homogéneo y el uso de la tecnología de microondas en procesos de alto valor añadido y fuerte dependencia con la temperatura. Esta tesis doctoral presenta el trabajo realizado en el diseño y fabricación de dos sistemas S2MH: el primero es un horno estático versátil para diferentes procesos químicos, y el segundo un horno de transporte para el secado de almendras. Estos dos sistemas están formados por el SSMGS (Solid-State Microwave Generator System), que incluye cuatro amplificadores de estado sólido (SSPA) con una generación de la onda coherente, y el aplicador. Para el diseño del SSMGS se han tenido en cuenta los requisitos de potencia y frecuencia de cada aplicación. Se ha utilizado un SSMGS con cuatro PA de 250 W a 2,450 MHz para el horno de aplicaciones químicas, mientras que el secado de almendras necesita cuatro PA de 500 W a 915 MHz. Los dos sistemas de generación de microondas permiten un control individual o combinado de los parámetros de los cuatro módulos amplificadores, i.e., potencia, frecuencia y fase. Todo el proceso de diseño ha sido llevado a cabo mediante modelado multi-físico, poniendo un especial cuidado en las propiedades termofísicas y dieléctricas de los alimentos y soluciones acuosas que tienen una importante dependencia con la temperatura. El comportamiento completo del sistema aplicador se ha estudiado con estas herramientas. Tras la fabricación de los dos prototipos o pruebas de concepto (PoC), los resultados obtenidos presentan un comportamiento similar al modelo y muestran, además, prometedoras mejoras frente a los sistemas actuales. El sistema de aplicaciones químicas presenta mejoras en la distribución de campo, independientemente de la aplicación y la carga. Y el sistema de secado de almendras proporciona un mayor control sobre el proceso evitando la pérdida de material por sobrecalentamiento.[CA] La utilització de sistemes de microones en aplicacions d'escalfament està molt estesa, principalment pel seu us en escalfament domèstic. El volum de ventes del forn de microones domèstic reflexa una informació curiosa: es l'electrodomèstic més venut anualment al món. Per això, el cost de producció del seu element principal, el magnetró, presenta uns marges de benefici imbatibles. No obstant això, els avanços en la fabricació de generadors de RF d'alta potencia d'estat sòlid han posat de manifest tant les limitacions dels sistemes basats en magnetró, com els grans avantatges de la tecnologia de transistors. Actualment, els amplificadors de potència d'estat sòlid son el suficientment madurs com per competir en eficiència, cost i qualitat de l'ona generada amb el magnetró. Els principals avantatges dels transistors son les dimensions reduïdes, tensions d'alimentació baixes, un espectre pur en freqüència, major temps de vida i el control digital directe. Els sistemes de microones amb aquesta tecnologia estan sent introduïts al mercat des de fa deu anys, malgrat les aplicacions reals son escasses. El principal motiu és la falta de dissenys de aplicadors específics per obtindré el màxim profit de les fonts d'estat sòlid. , por tanto, es éste el objetivo de la tesis doctoral. Els sistemes S2MH es presenten en esta dissertació doctoral com una alternativa que ofereix un escalfament millorat. La possibilitat de seleccionar la freqüència exacta, ajustar la potència d'eixida i realitzar un rastreig de fase de forma coherent amb molts il·luminadors proporcionen al sistema un control precís del procés d'escalfament. El resultat directe d'aquest es un escalfament homogeni i el us de la tecnologia de microones en processos d'alt valor afegit i alta sensibilitat a la temperatura. Aquesta dissertació doctoral presenta el treball realitzat en el disseny i fabricació de dos sistemes S2MH: el primer és un forn estàtic i versàtil per a diferent processos químics, i el segon es tracta d'un forn de transport per l'assecatge d'ametles. Tots dos sistemes estan formats pel SSMGS, que inclou quatre amplificadors d'estat sòlid (SSPA) amb generació coherent de l'ona, i l'aplicador. Per al disseny del SSMGS s'han tingut en compte els requisits de potència i freqüència de cada aplicació. S'ha utilitzat un SSMGS amb quatre PA de 250 W a 2,450 MHz per al forn d'aplicacions químiques, mentre que per al d'assecat d'ametla es necessita quatre PA de 500 W a 915 MHz. Ambdós sistemes de generació de microones permeten un control individual o combinat dels paràmetres dels quatre mòduls amplificadors, i.e., potència, freqüència i fase. Tot el procés de disseny ha sigut realitzat amb l'ajuda del modelat multi-físic, prestant una especial atenció a les propietats termofísiques i dielèctriques dels aliments i solucions aquoses, que tenen una important dependència de la temperatura. El comportament complet del sistema aplicador ha sigut estudiat amb estes ferramentes digitals. Després de la fabricació dels dos prototips o proves de concepte (PoC), els resultats obtinguts presenten un comportament similar al model i, a més a més, mostren millores prometedores front als sistemes actuals. El sistema d'aplicacions químiques presenta millores en la distribució de camp, independentment de l'aplicació i la càrrega. I el sistema d'assecatge d'ametlles proporciona un major control sobre el procés, evitant la pèrdua de material per sobreescalfament.[EN] Microwave systems are widely used for heating applications, mainly domestic food heating. The microwave oven sales figures place it as the first domestic appliance, giving its core element, the magnetron, an unbeatable production cost margin. However, recent improvements in RF high-power generator manufacturing have pointed out not only the limitations of these systems based on the magnetron but also the main benefits of the transistors technology. Nowadays, solid-state power amplifiers are mature enough to compete in efficiency, cost and quality with the magnetron. Transistors' main benefits are their reduced size, low operation voltages, pure frequency spectrum, lifetime, and straightforward digital control. Microwave systems based on solid-state power amplifiers have been recently introduced, although the real applications making use of them are rare. The main issue is the lack of applicator designs for specific solid-state sources that fully exploit the mentioned advantages; therefore, this is the main objective of the present PhD thesis. Solid-State Microwave Heating (S2MH) systems are presented in this PhD dissertation as an alternative that offers enhanced heating. Fine frequency selection, adjustable output power and coherent phase sweep in multiple outputs provide the system with accurate control over the heating process. The direct outcome of this control is the production of homogeneous heating and the application of microwave technology into high-added-value temperature-sensitive processes. The complete design and manufacture of two S2MH systems have been carried out and presented in this PhD thesis. The two designed systems are a multi-process chemical lab batch oven and an almond drying conveyorized oven. These two systems are composed of the Solid-State Microwave Generator System (SSMGS), consisting of four Solid-State Power Amplifiers (SSPA) with coherent wave generation, and the applicator. The design of the SSMGS has been carried out according to the power and frequency requirements of the application. A 4 x 250 W SSPA at 2,450 MHz SSMGS has been used for the chemical processes oven, while the almond drying application needs 4 x 500 W SSPA at 915 MHz. Both SSMGS allow the individual or combined digital control of the parameters of the four amplifying modules, i.e., power, frequency and phase. Multiphysics modelling has been thoroughly studied with special attention to the temperature-dependent thermophysical and dielectric properties of food and liquid solutions. The overall applicators' behaviour has been analysed with this tool. After completing the two PoC (Proof of Concept), the results show good agreement with the models. Both PoCs have shown promising improvements to the current state-of-the-art systems. The chemical applications PoC shows electromagnetic field distribution improvements, independent of the application or load. On the other hand, the almonds drying system provides increased control over the process avoiding material losses through overheating.Santón Pons, P. (2022). Design and Development of a Multi-Frequency System for Microwave Heating [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/19132