Ocean Energy in Belgium - 2019

B

Deployment characterization of a floatable tidal energy converter on a tidal channel, Ria Formosa, Portugal

This paper presents the results of a pilot experiment with an existing tidal energy converter (TEC), Evopod 1 kW floatable prototype, in a real test case scenario (Faro Channel, Ria Formosa, Portugal). A baseline marine geophysical, hydrodynamic and ecological study based on the experience collected on the test site is presented. The collected data was used to validate a hydro-morphodynamic model, allowing the selection of the installation area based on both operational and environmental constraints. Operational results related to the description of power generation capacity, energy capture area and proportion of energy flux are presented and discussed, including the failures occurring during the experimental setup. The data is now available to the scientific community and to TEC industry developers, enhancing the operational knowledge of TEC technology concerning efficiency, environmental effects, and interactions (i.e. device/environment). The results can be used by developers on the licensing process, on overcoming the commercial deployment barriers, on offering extra assurance and confidence to investors, who traditionally have seen environmental concerns as a barrier, and on providing the foundations whereupon similar deployment areas can be considered around the world for marine tidal energy extraction.Acknowledgements The paper is a contribution to the SCORE project, funded by the Portuguese Foundation for Science and Technology (FCT e PTDC/ AAG-TEC/1710/2014). Andre Pacheco was supported by the Portu- guese Foundation for Science and Technology under the Portuguese Researchers' Programme 2014 entitled “Exploring new concepts for extracting energy from tides” (IF/00286/2014/CP1234). Eduardo GGorbena has received funding for the OpTiCA project from the ~ Marie Skłodowska-Curie Actions of the European Union's H2020- MSCA-IF-EF-RI-2016/under REA grant agreement n [748747]. The authors would like to thank to the Portuguese Maritime Authorities and Sofareia SA for their help on the deployment.info:eu-repo/semantics/publishedVersio

New steps in the development of the second generation TEC GESMEY

The paper shows the results of the new steps that have been done in the development of the tidal energy converter GESMEY. These are the design, construction and trials into the sea of a 1/10 scale prototype and also the construction with the same scale of the buoy BOSCEM, that anchors the device and lets it in the correct work position and depth, along the two directions of the flow that the daily tidal cycle have. Inside the paper is described the objectives and the methodology of the experimental trials that were ca rry out the last summer with the scale prototype. GESMEY is a new type of tidal energy converter (TEC) that has the capability to exploit currents in waters over forty meters by itself and it gets only using its internal ballast system the necessary equilibrium between hy drostatics and hydrodynamics forces to make the emersion and the immersion procedures without any other help. Finally the paper shows the description of the results obtained over the performance of the devices along the immersion, emersion and floating transport manoeuvres and afterwards the results, that were obtained along the generation power tests that were carried out, are shown

Experimental evaluation of a mixer-ejector hydrokinetic turbine at two open-water test sites and in a tow tank

For marine hydrokinetic energy to become viable it is essential to develop energy conversion devices that extract energy with high efficiency, and to field-test them in an environment similar to the one in which they are designed to eventually operate. FloDesign Inc., with FloDesign Wind Turbine Corp., developed a Mixer-Ejector Hydrokinetic Turbine (MEHT) that encloses the turbine in a specially designed shroud to increase mass flow through the turbine rotor. A scaled version of this turbine was evaluated experimentally at two open-water tidal energy test sites, and in a tow tank. State-of-the-art instrumentation was used to measure free stream and wake velocities, turbine power extraction, test platform loadings and platform motion induced by sea state. The MEHT was able to generate power from tidal currents over a wide range of conditions, with low-velocity start-up. The decay of the wake velocity deficit was found to improve with increasing free stream turbulence

Levelized Cost of Energy: A First Evaluation for a Self Balancing Kinetic Turbine

Abstract Since 2009, the team DIMEG Unical and SintEnergy srl have been developing an innovative kinetic turbine able to produce energy form tidal currents. The machine is able to maintain the frontal position to the flow only thanks to its geometry and technical solutions. This turbine doesn't need any concrete structure, nor pylons or floating devices; in terms of energy conversion, it doesn't use any nacelle, gearbox, external generator, but only a little stabilizer, a permanent magnetic generator and a coast anchoring system able to retain the machine during the working operations. A first cost evaluation has been performed in this work, together with an approximate LCOE calculation, in order to compare this device to the other ones in the pre commercialization phase. The project is in an early stage of the development, but quite ready for a prototype realization

ADV preview based nonlinear predictive control for maximizing power generation of a tidal turbine with hydrostatic transmission

As the development of tidal turbines attracts more and more attention in recent years, reliable design and efficient control of tidal turbines are becoming increasingly important. However, the majority of existing tidal turbines still utilize traditional fixed ratio geared transmissions and the associated control designs focus on simple feedback controllers that use measurements or possibly estimates of the turbine itself or current local tidal profile. Therefore, the measurement and control are inevitably affected by the inherent delay with respect to the current tidal speeds. This paper proposes a novel tidal turbine with continuously variable speed hydrostatic transmissions and a nonlinear predictive controller that uses short-term predictions of the approaching tidal speed field to enhance the maximum tidal power generations when the tidal speed is below the rated value. The controller is designed based on an offline finite-horizon continuous time minimization of a cost function, and an integral action is incorporated into the control loop to increase the robustness against parameter variations and uncertainties. A smooth second order sliding mode observer is also designed for parameter estimations in the control loop. A 150 kW tidal turbine with hydrostatic transmission is designed and implemented. The results demonstrate that the averaged generator power increases by 6.76% with this preview based nonlinear predictive controller compared with a classical non-predictive controller

Assessment and Nonlinear Modeling of Wave, Tidal and Wind Energy Converters and Turbines

The Special Issue “Assessment and Nonlinear Modeling of Wave, Tidal, and Wind Energy Converters and Turbines” contributes original research to stimulate the continuing progress of the offshore renewable energy (ORE) field, with a focus on state-of-the-art numerical approaches developed for the design and analysis of ORE devices. Particularly, this collection provides new methodologies, analytical/numerical tools, and theoretical methods that deal with engineering problems in the ORE field of wave, wind, and current structures. This Special Issue covers a wide range of multidisciplinary aspects, such as the 1) study of generalized interaction wake model systems with elm variation for offshore wind farms; 2) a flower pollination method based on global maximum power point tracking strategy for point-absorbing type wave energy converters; 3) performance optimization of a Kirsten–Boeing turbine using a metamodel based on neural networks coupled with CFD; 4) proposal of a novel semi-submersible floating wind turbine platform composed of inclined columns and multi-segmented mooring lines; 5) reduction of tower fatigue through blade back twist and active pitch-to-stall control strategy for a semi-submersible floating offshore wind turbine; 6) assessment of primary energy conversion of a closed-circuit OWC wave energy converter; 7) development and validation of a wave-to-wire model for two types of OWC wave energy converters; 8) assessment of a hydrokinetic energy converter based on vortex-induced angular oscillations of a cylinder; 9) application of wave-turbulence decomposition methods on a tidal energy site assessment; 10) parametric study for an oscillating water column wave energy conversion system installed on a breakwater; 11) optimal dimensions of a semisubmersible floating platform for a 10 MW wind turbine; 12) fatigue life assessment for power cables floating in offshore wind turbines

Assessment and Nonlinear Modeling of Wave, Tidal and Wind Energy Converters and Turbines

Offshore renewable energy (ORE) sources, such as offshore wind turbines, wave energy converters, and tidal and current turbines, have experienced rapid growth in the past decade. The combination of wave, wind, and current energy devices in hybrid marine platforms that use synergies through proper combinations has been a recent scientific focus. The new concepts and structures being investigated require developing new design and analysis approaches that implement novel numerical modeling tools and simulation methods, thus advancing science, technology, and engineering. ORE structures may be subject to complex loads and load effects, which demand comprehensive and accurate numerical modeling representations of the physics underpinning the problem. Important factors that affect design, functionality, structural integrity, and performance of offshore structures include (but are not limited to): fluid–structure interactions, controller actions, intense dynamic effects, nonlinear loadings, extreme and harsh weather conditions, and impact pressure loads. Furthermore, these factors cannot be considered in isolation, since each factor is potentially coupled with another, requiring fully coupled models. To enable further growth in reliable ORE technologies, more advanced numerical tools and nonlinear modeling are needed