Channel estimation for SISO and MIMO OFDM communications systems.

Thesis (Ph.D.)-University of KwaZulu-Natal, Durban, 2010.Telecommunications in the current information age is increasingly relying on the wireless link. This is because wireless communication has made possible a variety of services ranging from voice to data and now to multimedia. Consequently, demand for new wireless capacity is growing rapidly at a very alarming rate. In a bid to cope with challenges of increasing demand for higher data rate, better quality of service, and higher network capacity, there is a migration from Single Input Single Output (SISO) antenna technology to a more promising Multiple Input Multiple Output (MIMO) antenna technology. On the other hand, Orthogonal Frequency Division Multiplexing (OFDM) technique has emerged as a very popular multi-carrier modulation technique to combat the problems associated with physical properties of the wireless channels such as multipath fading, dispersion, and interference. The combination of MIMO technology with OFDM techniques, known as MIMO-OFDM Systems, is considered as a promising solution to enhance the data rate of future broadband wireless communication Systems. This thesis addresses a major area of challenge to both SISO-OFDM and MIMO-OFDM Systems; estimation of accurate channel state information (CSI) in order to make possible coherent detection of the transmitted signal at the receiver end of the system. Hence, the first novel contribution of this thesis is the development of a low complexity adaptive algorithm that is robust against both slow and fast fading channel scenarios, in comparison with other algorithms employed in literature, to implement soft iterative channel estimator for turbo equalizer-based receiver for single antenna communication Systems. Subsequently, a Fast Data Projection Method (FDPM) subspace tracking algorithm is adapted to derive Channel Impulse Response Estimator for implementation of Decision Directed Channel Estimation (DDCE) for Single Input Single Output - Orthogonal Frequency Division Multiplexing (SISO-OFDM) Systems. This is implemented in the context of a more realistic Fractionally Spaced-Channel Impulse Response (FS-CIR) channel model, as against the channel characterized by a Sample Spaced-Channel Impulse Response (SS)-CIR widely assumed by other authors. In addition, a fast convergence Variable Step Size Normalized Least Mean Square (VSSNLMS)-based predictor, with low computational complexity in comparison with others in literatures, is derived for the implementation of the CIR predictor module of the DDCE scheme. A novel iterative receiver structure for the FDPM-based Decision Directed Channel Estimation scheme is also designed for SISO-OFDM Systems. The iterative idea is based on Turbo iterative principle. It is shown that improvement in the performance can be achieved with the iterative DDCE scheme for OFDM system in comparison with the non iterative scheme. Lastly, an iterative receiver structure for FDPM-based DDCE scheme earlier designed for SISO OFDM is extended to MIMO-OFDM Systems. In addition, Variable Step Size Normalized Least Mean Square (VSSNLMS)-based channel transfer function estimator is derived in the context of MIMO Channel for the implementation of the CTF estimator module of the iterative Decision Directed Channel Estimation scheme for MIMO-OFDM Systems in place of linear minimum mean square error (MMSE) criterion. The VSSNLMS-based channel transfer function estimator is found to show improved MSE performance of about -4 MSE (dB) at SNR of 5dB in comparison with linear MMSE-based channel transfer function estimator

Digital Signal Processing for Coherent Transceivers Employing Multilevel Formats

Digital coherent transceivers have revolutionized optical fiber communications due to their superior performance offered compared to intensity modulation and direct detection based alternatives. As systems employing digital coherent transceivers seek to approach their information theoretic capacity, the use of multilevel modulation formats combined with appropriate forward error correction becomes essential. Given this context, in this tutorial paper, we therefore explore the digital signal processing (DSP) utilized in a coherent transceiver with a focus on multilevel modulation formats. By way of an introduction, we open by discussing the photonic technology required to realize a coherent transceiver. After discussing this interface between the analog optical channel and the digital domain, the rest of the paper is focused on DSP. We begin by discussing algorithms that correct for imperfections in the optical to digital conversion, including IQ imbalance and timing skew. Next, we discuss channel equalization including means for their realization for both quasi-static and dynamic channel impairments. Synchronization algorithms that correct for the difference between the transmitter and receiver oscillators both optical and electrical are then discussed and issues associated with symbol decoding highlighted. For most of the cases, we start with polarization division multiplexed quadrature phase-shift keying (PDM-QPSK) format as a basis and then discuss the extension to allow for high order multilevel formats. Finally, we conclude by discussing some of the open research challenges in the field.This work was supported in part by the EU project ICONE (608099) and EPSRC through INSIGHT (EP/L026155/2) and UNLOC (EP/J017582/1)

Compensation of fibre impairments in coherent optical systems

Tese de mestrado integrado. Engenharia Electrotécnica e de Computadores. Faculdade de Engenharia. Universidade do Porto. 201

Contributions to adaptive equalization and timing recovery for optical storage systems

no abstrac

Real-time digital signal processing for new wavelength-to-the-user optical access networks

Nowadays, optical access networks provide high capacity to end users with growing availability of multimedia contents that can be streamed to fixed or mobile devices. In this regard, one of the most flexible and low-cost approaches is Passive Optical Network (PON) that is used in Fiber-to-the-Home (FTTH). Due to the growing of the bandwidth demands, Wavelength Division Multiplexing (WDM), and later on ultra-dense WDM (udWDM) PON, with a narrow channel spacing, to increase the number of users through a single fiber, has been deployed. The udWDM-PON with coherent technology is an attractive solution for the next generation optical access networks with advanced digital signal processing (DSP). Thanks to the higher sensitivity and improved channel selectivity in coherent detection with efficient DSP, optical networks support larger number of users in longer distances. Since the cost is the main concern in the optical access networks, this thesis presents DSP architectures in coherent receiver (Rx), based on low-cost direct phase modulated commercial DFB lasers. The proposals are completely in agreement with consept of wavelength-to-the-user, where each client in optical network is dedicated to an individual wavelength. Next, in a 6.25 GHz spaced udWDM grid with the optimized DSP techniques and phase-shift-keying (PSK) modulation format, the high sensitivity is achieved in real-time field-programmable-gate-array (FPGA) implementations. Moreover, this thesis reduces hardware complexity of optical carrier recovery (CR) with two various strategies. First, based on differential mth-power frequency estimator (FE) by using look-up-tables (LUTs) and second, LUT-free CR architecture, with optimizing the power consumption and hardware resources, as well as improving the channel selectivity in terms of speed and robustness. Furthermore, by designing very simple but efficient clock recovery, a symbol-rate DSP architecture, which process data using only one sample per symbol (1-sps), for polarization diversity (POD) structure, becomes possible. It makes the DSP independent from state-of-polarization (SOP), even in the case of low-cost optical front-end and low-speed analog-to-digital converters (ADCs), keeps the performance high as well as sensitivity in real-time implementations on FPGA.Avui en dia, les xarxes d'accés òptic proporcionen una alta capacitat als usuaris finals amb una creixent disponibilitat de continguts multimèdia que es poden transmetre a dispositius fixos o mòbils. En aquest sentit, un dels enfocaments més flexibles i de baix cost és la Xarxa Òptica Passiva (PON) que s'utilitza a Fibra-fins-la-Llar (FTTH). A causa del creixent requeriment de l'ample de banda, s'ha desplegat la multiplexació de divisió d'ona (WDM) i, posteriorment, el PON amb WDM d'alta densitat (udWDM), amb un espaiat estret de canals, per augmentar el nombre d'usuaris a través d'una sola fibra. L'udWDM-PON amb tecnologia coherent és una solució atractiva per a les xarxes d'accés òptic d'última generació amb processament avançat de senyal digital (DSP). Gràcies a la major sensibilitat i a la selectivitat millorada del canal en la detecció coherent amb DSP eficient, les xarxes òptiques suporten un nombre més gran d'usuaris a distàncies més llargues. Atès que el cost és la principal preocupació en les xarxes d'accés òptic, aquesta tesi presenta arquitectures DSP en receptor coherent (Rx), basades en làsers DFB comercials modulats en fase directa de baix cost. Les propostes estan d'acord amb la asignació de la longitud d'ona a l'usuari, on a cada client de la xarxa òptica se li dedica a una longitud d'ona individual. A continuació, en una graella udWDM espaciada de 6,25 GHz amb les tècniques de DSP optimitzades i el format de modulació de fase (PSK), s'aconsegueix l'alta sensibilitat en implementacions field-programable-gate-array (FPGA) en temps real. A més, aquesta tesi redueix la complexitat del maquinari de recuperació òptica de portadors (CR) amb dues estratègies diverses. Primer, basat en un estimador de freqüència de potència diferencial (FE) mitjançant l'ús de taules de cerca (LUTs) i, en segon lloc, l'arquitectura CR sense LUT, amb l'optimització del consum d'energia i els recursos de maquinari, a més de millorar la selectivitat del canal en termes de velocitat i robustesa. A més, al dissenyar una recuperació de rellotge molt simple, però eficaç, es fa possible una arquitectura DSP a la velocitat dels símbols, que processa dades utilitzant només una mostra per símbol (1-sps) per a l'estructura de la diversitat de polarització òptica (POD). Fa que el DSP sigui independent de l'estat de polarització (SOP), fins i tot en el cas dels analog-to-digital converters (ADC) de front-end òptics de baix cost, i manté el rendiment alt i la sensibilitat en les implementacions en temps real de FPGA