50,823 research outputs found
Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration in mmWave Cellular Networks
MmWave communications are expected to play a major role in the Fifth
generation of mobile networks. They offer a potential multi-gigabit throughput
and an ultra-low radio latency, but at the same time suffer from high isotropic
pathloss, and a coverage area much smaller than the one of LTE macrocells. In
order to address these issues, highly directional beamforming and a very
high-density deployment of mmWave base stations were proposed. This Thesis aims
to improve the reliability and performance of the 5G network by studying its
tight and seamless integration with the current LTE cellular network. In
particular, the LTE base stations can provide a coverage layer for 5G mobile
terminals, because they operate on microWave frequencies, which are less
sensitive to blockage and have a lower pathloss. This document is a copy of the
Master's Thesis carried out by Mr. Michele Polese under the supervision of Dr.
Marco Mezzavilla and Prof. Michele Zorzi. It will propose an LTE-5G tight
integration architecture, based on mobile terminals' dual connectivity to LTE
and 5G radio access networks, and will evaluate which are the new network
procedures that will be needed to support it. Moreover, this new architecture
will be implemented in the ns-3 simulator, and a thorough simulation campaign
will be conducted in order to evaluate its performance, with respect to the
baseline of handover between LTE and 5G.Comment: Master's Thesis carried out by Mr. Michele Polese under the
supervision of Dr. Marco Mezzavilla and Prof. Michele Zorz
CAN Fieldbus Communication in the CSP-based CT Library
In closed-loop control systems several realworld entities are simultaneously communicated to through a multitude of spatially distributed sensors and actuators. This intrinsic parallelism and complexity motivates implementing control software in the form of concurrent processes deployed on distributed hardware architectures. A CSP based occam-like architecture seems to be the most convenient for such a purpose. Many, often conflicting, requirements make design and implementation of distributed real-time control systems an extremely difficult task. The scope of this paper is limited to achieving safe and real-time communication over a CAN fieldbus for an\ud
existing CSP-based framework
Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration
Communications at frequencies above 10 GHz (the mmWave band) are expected to
play a major role for the next generation of cellular networks (5G), because of
the potential multi-gigabit, ultra-low latency performance of this technology.
mmWave frequencies however suffer from very high isotropic pathloss, which may
result in cells with a much smaller coverage area than current LTE macrocells.
High directionality techniques will be used to improve signal quality and
extend coverage area, along with a high density deployment of mmWave base
stations (BS). However, when propagation conditions are hard and it is
difficult to provide high quality coverage with mmWave BS, it is necessary to
rely on previous generation LTE base stations, which make use of lower
frequencies (900 MHz - 3.5 GHz), which are less sensitive to blockage and
experience lower pathloss. In order to provide ultra-reliable services to
mobile users there is a need for network architectures that tightly and
seamlessly integrate the LTE and mmWave Radio Access Technologies. In this
paper we will present two possible alternatives for this integration and show
how simulation tools can be used to assess and compare their performance.Comment: This paper was accepted for presentation at the ninth EAI SIMUtools
2016 conference, August 22 - 23, 2016, Prague, Czech Republi
Future benefits and applications of intelligent on-board processing to VSAT services
The trends and roles of VSAT services in the year 2010 time frame are examined based on an overall network and service model for that period. An estimate of the VSAT traffic is then made and the service and general network requirements are identified. In order to accommodate these traffic needs, four satellite VSAT architectures based on the use of fixed or scanning multibeam antennas in conjunction with IF switching or onboard regeneration and baseband processing are suggested. The performance of each of these architectures is assessed and the key enabling technologies are identified
Deliverable JRA1.1: Evaluation of current network control and management planes for multi-domain network infrastructure
This deliverable includes a compilation and evaluation of available control and management architectures and protocols applicable to a multilayer infrastructure in a multi-domain Virtual Network environment.The scope of this deliverable is mainly focused on the virtualisation of the resources within a network and at processing nodes. The virtualization of the FEDERICA infrastructure allows the provisioning of its available resources to users by means of FEDERICA slices. A slice is seen by the user as a real physical network under his/her domain, however it maps to a logical partition (a virtual instance) of the physical FEDERICA resources. A slice is built to exhibit to the highest degree all the principles applicable to a physical network (isolation, reproducibility, manageability, ...). Currently, there are no standard definitions available for network virtualization or its associated architectures. Therefore, this deliverable proposes the Virtual Network layer architecture and evaluates a set of Management- and Control Planes that can be used for the partitioning and virtualization of the FEDERICA network resources. This evaluation has been performed taking into account an initial set of FEDERICA requirements; a possible extension of the selected tools will be evaluated in future deliverables. The studies described in this deliverable define the virtual architecture of the FEDERICA infrastructure. During this activity, the need has been recognised to establish a new set of basic definitions (taxonomy) for the building blocks that compose the so-called slice, i.e. the virtual network instantiation (which is virtual with regard to the abstracted view made of the building blocks of the FEDERICA infrastructure) and its architectural plane representation. These definitions will be established as a common nomenclature for the FEDERICA project. Other important aspects when defining a new architecture are the user requirements. It is crucial that the resulting architecture fits the demands that users may have. Since this deliverable has been produced at the same time as the contact process with users, made by the project activities related to the Use Case definitions, JRA1 has proposed a set of basic Use Cases to be considered as starting point for its internal studies. When researchers want to experiment with their developments, they need not only network resources on their slices, but also a slice of the processing resources. These processing slice resources are understood as virtual machine instances that users can use to make them behave as software routers or end nodes, on which to download the software protocols or applications they have produced and want to assess in a realistic environment. Hence, this deliverable also studies the APIs of several virtual machine management software products in order to identify which best suits FEDERICA’s needs.Postprint (published version
Recommended from our members
Computing infrastructure issues in distributed communications systems : a survey of operating system transport system architectures
The performance of distributed applications (such as file transfer, remote login, tele-conferencing, full-motion video, and scientific visualization) is influenced by several factors that interact in complex ways. In particular, application performance is significantly affected both by communication infrastructure factors and computing infrastructure factors. Several communication infrastructure factors include channel speed, bit-error rate, and congestion at intermediate switching nodes. Computing infrastructure factors include (among other things) both protocol processing activities (such as connection management, flow control, error detection, and retransmission) and general operating system factors (such as memory latency, CPU speed, interrupt and context switching overhead, process architecture, and message buffering). Due to a several orders of magnitude increase in network channel speed and an increase in application diversity, performance bottlenecks are shifting from the network factors to the transport system factors.This paper defines an abstraction called an "Operating System Transport System Architecture" (OSTSA) that is used to classify the major components and services in the computing infrastructure. End-to-end network protocols such as TCP, TP4, VMTP, XTP, and Delta-t typically run on general-purpose computers, where they utilize various operating system resources such as processors, virtual memory, and network controllers. The OSTSA provides services that integrate these resources to support distributed applications running on local and wide area networks.A taxonomy is presented to evaluate OSTSAs in terms of their support for protocol processing activities. We use this taxonomy to compare and contrast five general-purpose commercial and experimental operating systems including System V UNIX, BSD UNIX, the x-kernel, Choices, and Xinu
- …