Contribution to the optimization of 4G mobile communications by means of advanced carrier aggregation strategies

Mobile broadband subscriptions and data traffic have increasingly grown in the past years with the deployment of the 3G and 4G technologies and the massive use of mobile devices. In this sense, LTE-A has been presented as the next step in wireless communications where higher data rates are targeted and fully packet switched services are held. The ultimate goal of 4G and the forthcoming 5G technology is to increase the Quality of Experience (QoE) of users. In this context, several challenges open up to face the increased bandwidth demands in both uplink (UL) and downlink (DL). To this end, LTE-A has proposed the use of Carrier Aggregation (CA) which allows the simultaneous data transmission in separate fragments of spectrum. The improvements brought by CA in the DL can be almost straightforward appreciable, since the evolved Node B (eNB) is in charge of transmissions, and power availability is not typically an issue. Conversely, the UL presents many open challenges to introduce aggregated transmissions, since it relies on the user terminal for transmission procedures. Lower transmission power and increased interference variability turn the UL more complex than the DL. For this reason, this Ph.D. thesis provides a contribution to the field of CA for UL mobile systems. The novelties here presented address the main limitations the UL encounters when introducing CA; new methods and strategies are proposed with the final aim of enhancing the UL communications with the use of increased bandwidth transmissions, and reducing the unbalanced data rate between the UL and DL. Throughout an exhaustive literature review, the main research opportunities to successfully implement CA in the UL were identified. In particular, three main blocks can be recognized. First, the need for introducing intelligent Radio Resource Management procedures that provide the user with increased QoE, specially in the cell edge, where users are more likely to be power limited, and CA is typically discarded. Consequently, the first part of this dissertation places emphasis on topics related to scheduling and the power limitations to face the increased bandwidth. In this sense, mechanisms that tackle the throughput improvement are proposed and scheduling schemes that specifically assess the gain or deterioration of CA are designed. Indeed, these strategies strongly rely on an accurate Channel State Information (CSI); it is of utmost importance to possess precise CSI to effectively support these assessments. In this line, the second part deals with the imperfect CSI where the efficient use of reference signals provides a high value. Channel prediction techniques have been proposed with the use of the splines method. However, the increased variability of interferences and the high delay in measurements still impairs the CSI accuracy. In this manner, interference management methods are introduced to support the CSI acquisition process. Finally, since CA constitutes the most transverse topic of the new features added to the 4G standard, the last block of research focuses on the opportunities that emerge with the use of CA in the context of heterogeneous networks, and new system designs are addressed. It is proposed to use dual connectivity in the form of decoupled uplink and downlink connections in a CA context, where aggregated carriers may have different coverage footprints. An analysis of two different cell association cases that arise has been driven. Stochastic geometry is used to study the system analytically, propagation conditions in the different tiers and frequencies are considered and the different association cases are compared to a classical downlink received power association rule. Conclusions show that decoupling the uplink provides the system with outstanding gains, however, being connected to the cell that receives the highest received power may not always be profitable, since issues like interferences or load conditions shall be also considered.El número de usuarios móviles y el tráfico de datos generado han aumentado en los últimos años con el despliegue de redes 3G y 4G y el uso masivo de dispositivos móviles. De este modo, LTE-A surge como el siguiente escalón de las comunicaciones móviles, dónde se apunta a mayores velocidades de transmisión y los servicios se basan en la conmutación de paquetes. El objetivo principal de las redes 4G y de la inminente red 5G es mejorar la experiencia del usuario. En este contexto, se presentan nuevos retos para hacer frente a las demandas de incrementar el ancho de banda en ambos enlaces: ascendente (UL) y descendente (DL). Por ello, LTE-A propone el uso de portadoras agregadas (Carrier Aggregation (CA)), tecnología que permite la transmisión simultánea en dos fragmentos del espectro. Las mejoras que aporta CA en el DL son casi inmediatas dado que las transmisiones corren a cargo de la base, la cual no sufre la falta de potencia. Al contrario, el UL presenta más retos para introducir CA, ya que es el terminal quién se encarga de la transmisión. La baja disponibilidad de potencia y la alta variabilidad de la interferencia lo convierten en un entorno mucho más complejo. Por ello, esta disertación presenta una contribución al campo de CA en el UL de comunicaciones móviles. Las novedades presentadas tratan las principales limitaciones para incorporar CA; se proponen nuevos métodos y estrategias con el objetivo de mejorar las comunicaciones en el UL mediante el uso de CA; todo ello, para reducir el desajuste que existe entre la velocidad de transmisión del UL y DL. Mediante una extensa revisión de la literatura, se han detectado las principales líneas de investigación y potenciales mejoras para incorporar CA exitosamente. Se han identificado tres grandes bloques de investigación. Primero, la necesidad de introducir estrategias de gestión de recursos inteligentes, que proporcionen al usuario una mejora de la experiencia, especialmente en el límite de la celda. Es allí donde los usuarios tienen una mayor probabilidad de estar limitados en potencia, razón por la que se les aparta de CA. Consecuentemente, la primera parte de esta tesis pone énfasis en la asignación de recursos y las limitaciones en potencia por parte del usuario para hacer frente a un incremento del ancho de banda. Se proponen mecanismos que mejoran la velocidad de transmisión evaluando las ganancias o pérdidas de incorporar CA a la transmisión. Para apoyar el funcionamiento de estas estrategias de asignación, y asegurar su máximo rendimiento, es necesario un método que proporcione un conocimiento preciso y fidedigno del estado del canal (Channel State Information (CSI)). De este modo, la segunda parte de la investigación lidia con el CSI, donde el uso eficiente de las señales de referencia es de gran importancia. Se proponen técnicas de predicción de señal mediante el uso de Splines; sin embargo, la alta variabilidad de las interferencias y el gran retardo entre dos muestras de CSI perjudican la precisión. Por ello, se introducen métodos de gestión de interferencias que apoyan el proceso de adquisición del CSI. Finalmente, dado que CA es una de las funciones más transversales de las introducidas por el estándar 4G, la última parte de investigación se centra en las oportunidades que surgen con su uso en las redes heterogéneas. Se propone el uso de la conectividad dual, desacoplando el UL del DL junto con CA, donde el área de cobertura de las portadoras puede ser diferente. Se analizan dos escenarios de asociación posibles. Con el uso de geometría estocástica se estudia analíticamente el sistema, considerando diferentes condiciones de propagación en los distintos tipos de celda y frecuencias; los escenarios de asociación se comparan a uno tradicional, en el cual los usuarios se asocian en función de la potencia recibida de las bases. Las conclusiones destacan que el desacoplo aporta mejoras en el UL. Sin embargo, temas como interferencias o carga deben también considera

Informe bibliomètric bimestral

Informe bibliomètric bimestral Campus Baix Llobregat. Base de dades Scopus. Data de la cerca 01/03/2017Postprint (published version

Towards addressing training data scarcity challenge in emerging radio access networks: a survey and framework

The future of cellular networks is contingent on artificial intelligence (AI) based automation, particularly for radio access network (RAN) operation, optimization, and troubleshooting. To achieve such zero-touch automation, a myriad of AI-based solutions are being proposed in literature to leverage AI for modeling and optimizing network behavior to achieve the zero-touch automation goal. However, to work reliably, AI based automation, requires a deluge of training data. Consequently, the success of the proposed AI solutions is limited by a fundamental challenge faced by cellular network research community: scarcity of the training data. In this paper, we present an extensive review of classic and emerging techniques to address this challenge. We first identify the common data types in RAN and their known use-cases. We then present a taxonomized survey of techniques used in literature to address training data scarcity for various data types. This is followed by a framework to address the training data scarcity. The proposed framework builds on available information and combination of techniques including interpolation, domain-knowledge based, generative adversarial neural networks, transfer learning, autoencoders, fewshot learning, simulators and testbeds. Potential new techniques to enrich scarce data in cellular networks are also proposed, such as by matrix completion theory, and domain knowledge-based techniques leveraging different types of network geometries and network parameters. In addition, an overview of state-of-the art simulators and testbeds is also presented to make readers aware of current and emerging platforms to access real data in order to overcome the data scarcity challenge. The extensive survey of training data scarcity addressing techniques combined with proposed framework to select a suitable technique for given type of data, can assist researchers and network operators in choosing the appropriate methods to overcome the data scarcity challenge in leveraging AI to radio access network automation

Decentralized Ultra-Reliable Low-Latency Communications through Concurrent Cooperative Transmission

Emerging cyber-physical systems demand for communication technologies that enable seamless interactions between humans and physical objects in a shared environment. This thesis proposes decentralized URLLC (dURLLC) as a new communication paradigm that allows the nodes in a wireless multi-hop network (WMN) to disseminate data quickly, reliably and without using a centralized infrastructure. To enable the dURLLC paradigm, this thesis explores the practical feasibility of concurrent cooperative transmission (CCT) with orthogonal frequency-division multiplexing (OFDM). CCT allows for an efficient utilization of the medium by leveraging interference instead of trying to avoid collisions. CCT-based network flooding disseminates data in a WMN through a reception-triggered low-level medium access control (MAC). OFDM provides high data rates by using a large bandwidth, resulting in a short transmission duration for a given amount of data. This thesis explores CCT-based network flooding with the OFDM-based IEEE 802.11 Non-HT and HT physical layers (PHYs) to enable interactions with commercial devices. An analysis of CCT with the IEEE 802.11 Non-HT PHY investigates the combined effects of the phase offset (PO), the carrier frequency offset (CFO) and the time offset (TO) between concurrent transmitters, as well as the elapsed time. The analytical results of the decodability of a CCT are validated in simulations and in testbed experiments with Wireless Open Access Research Platform (WARP) v3 software-defined radios (SDRs). CCT with coherent interference (CI) is the primary approach of this thesis. Two prototypes for CCT with CI are presented that feature mechanisms for precise synchronization in time and frequency. One prototype is based on the WARP v3 and its IEEE 802.11 reference design, whereas the other prototype is created through firmware modifications of the Asus RT-AC86U wireless router. Both prototypes are employed in testbed experiments in which two groups of nodes generate successive CCTs in a ping-pong fashion to emulate flooding processes with a very large number of hops. The nodes stay synchronized in experiments with 10 000 successive CCTs for various modulation and coding scheme (MCS) indices and MAC service data unit (MSDU) sizes. The URLLC requirement of delivering a 32-byte MSDU with a reliability of 99.999 % and with a latency of 1 ms is assessed in experiments with 1 000 000 CCTs, while the reliability is approximated by means of the frame reception rate (FRR). An FRR of at least 99.999 % is achieved at PHY data rates of up to 48 Mbit/s under line-of-sight (LOS) conditions and at PHY data rates of up to 12 Mbit/s under non-line-of-sight (NLOS) conditions on a 20 MHz wide channel, while the latency per hop is 48.2 µs and 80.2 µs, respectively. With four multiple input multiple output (MIMO) spatial streams on a 40 MHz wide channel, a LOS receiver achieves an FRR of 99.5 % at a PHY data rate of 324 Mbit/s. For CCT with incoherent interference, this thesis proposes equalization with time-variant zero-forcing (TVZF) and presents a TVZF receiver for the IEEE 802.11 Non-HT PHY, achieving an FRR of up to 92 % for CCTs from three unsyntonized commercial devices. As CCT-based network flooding allows for an implicit time synchronization of all nodes, a reception-triggered low-level MAC and a reservation-based high-level MAC may in combination support various applications and scenarios under the dURLLC paradigm

Cubic spline extrapolation for uplink channel quality prediction in LTE-A with carrier aggregation

This is the peer reviewed version of the following article: Lema, M. A., García-Lozano, M., and Ruiz, S. (2015), Cubic spline extrapolation for uplink channel quality prediction in LTE-A with carrier aggregation. Trans. Emerging Tel. Tech., doi: 10.1002/ett.2950., which has been published in final form at http://onlinelibrary.wiley.com/doi/10.1002/ett.2950/epdf. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving.In the context of wireless communications, an accurate channel state information is the key to a correct radio resource management. In the uplink of long-term evolution advanced, obtaining up-to-date channel state information relies on user equipments that send sounding signals throughout the available bandwidth. This procedure is quite challenging when considering the ever increasing bandwidth demands and the introduction of carrier aggregation. Information from many radio resource blocks becomes outdated and unreliable for scheduling operations. Besides, interference values are much more variant than in the downlink due to changes in the position of interferers and their transmission power. This work proposes the introduction of a cubic spline extrapolation method to obtain a prediction horizon that allows extending the reliability of the channel quality evaluation along time. Although very high interference levels and variations thereof imply no gains, the mechanism succeeds with moderate interference, situation that can be provided by interference cancellation strategies.Peer Reviewe

XVIII International Coal Preparation Congress

Changes in economic and market conditions of mineral raw materials in recent years have greatly increased demands on the ef fi ciency of mining production. This is certainly true of the coal industry. World coal consumption is growing faster than other types of fuel and in the past year it exceeded 7.6 billion tons. Coal extraction and processing technology are continuously evolving, becoming more economical and environmentally friendly. “ Clean coal ” technology is becoming increasingly popular. Coal chemistry, production of new materials and pharmacology are now added to the traditional use areas — power industry and metallurgy. The leading role in the development of new areas of coal use belongs to preparation technology and advanced coal processing. Hi-tech modern technology and the increasing interna- tional demand for its effectiveness and ef fi ciency put completely new goals for the University. Our main task is to develop a new generation of workforce capacity and research in line with global trends in the development of science and technology to address critical industry issues. Today Russia, like the rest of the world faces rapid and profound changes affecting all spheres of life. The de fi ning feature of modern era has been a rapid development of high technology, intellectual capital being its main asset and resource. The dynamics of scienti fi c and technological development requires acti- vation of University research activities. The University must be a generator of ideas to meet the needs of the economy and national development. Due to the high intellectual potential, University expert mission becomes more and more called for and is capable of providing professional assessment and building science-based predictions in various fi elds. Coal industry, as well as the whole fuel and energy sector of the global economy is growing fast. Global multinational energy companies are less likely to be under state in fl uence and will soon become the main mechanism for the rapid spread of technologies based on new knowledge. Mineral resources will have an even greater impact on the stability of the economies of many countries. Current progress in the technology of coal-based gas synthesis is not just a change in the traditional energy markets, but the emergence of new products of direct consumption, obtained from coal, such as synthetic fuels, chemicals and agrochemical products. All this requires a revision of the value of coal in the modern world economy

Safety and Reliability - Safe Societies in a Changing World

The contributions cover a wide range of methodologies and application areas for safety and reliability that contribute to safe societies in a changing world. These methodologies and applications include: - foundations of risk and reliability assessment and management - mathematical methods in reliability and safety - risk assessment - risk management - system reliability - uncertainty analysis - digitalization and big data - prognostics and system health management - occupational safety - accident and incident modeling - maintenance modeling and applications - simulation for safety and reliability analysis - dynamic risk and barrier management - organizational factors and safety culture - human factors and human reliability - resilience engineering - structural reliability - natural hazards - security - economic analysis in risk managemen