4,179 research outputs found
Improved dynamical particle swarm optimization method for structural dynamics
A methodology to the multiobjective structural design of buildings based on an improved particle swarm optimization algorithm is presented, which has proved to be very efficient and robust in nonlinear problems and when the optimization objectives are in conflict. In particular, the behaviour of the particle swarm optimization (PSO) classical algorithm is improved by dynamically adding autoadaptive mechanisms that enhance the exploration/exploitation trade-off and diversity of the proposed algorithm, avoiding getting trapped in local minima. A novel integrated optimization system was developed, called DI-PSO, to solve this problem which is able to control and even improve the structural behaviour under seismic excitations. In order to demonstrate the effectiveness of the proposed approach, the methodology is tested against some benchmark problems. Then a 3-story-building model is optimized under different objective cases, concluding that the improved multiobjective optimization methodology using DI-PSO is more efficient as compared with those designs obtained using single optimization.Peer ReviewedPostprint (published version
Statistical and Computational Tradeoff in Genetic Algorithm-Based Estimation
When a Genetic Algorithm (GA), or a stochastic algorithm in general, is
employed in a statistical problem, the obtained result is affected by both
variability due to sampling, that refers to the fact that only a sample is
observed, and variability due to the stochastic elements of the algorithm. This
topic can be easily set in a framework of statistical and computational
tradeoff question, crucial in recent problems, for which statisticians must
carefully set statistical and computational part of the analysis, taking
account of some resource or time constraints. In the present work we analyze
estimation problems tackled by GAs, for which variability of estimates can be
decomposed in the two sources of variability, considering some constraints in
the form of cost functions, related to both data acquisition and runtime of the
algorithm. Simulation studies will be presented to discuss the statistical and
computational tradeoff question.Comment: 17 pages, 5 figure
An Analysis on Selection for High-Resolution Approximations in Many-Objective Optimization
This work studies the behavior of three elitist multi- and many-objective
evolutionary algorithms generating a high-resolution approximation of the
Pareto optimal set. Several search-assessment indicators are defined to trace
the dynamics of survival selection and measure the ability to simultaneously
keep optimal solutions and discover new ones under different population sizes,
set as a fraction of the size of the Pareto optimal set.Comment: apperas in Parallel Problem Solving from Nature - PPSN XIII,
Ljubljana : Slovenia (2014
Improved sampling of the pareto-front in multiobjective genetic optimizations by steady-state evolution: a Pareto converging genetic algorithm
Previous work on multiobjective genetic algorithms has been focused on preventing genetic drift and the issue of convergence has been given little attention. In this paper, we present a simple steady-state strategy, Pareto Converging Genetic Algorithm (PCGA), which naturally samples the solution space and ensures population advancement towards the Pareto-front. PCGA eliminates the need for sharing/niching and thus minimizes heuristically chosen parameters and procedures. A systematic approach based on histograms of rank is introduced for assessing convergence to the Pareto-front, which, by definition, is unknown in most real search problems.
We argue that there is always a certain inheritance of genetic material belonging to a population, and there is unlikely to be any significant gain beyond some point; a stopping criterion where terminating the computation is suggested. For further encouraging diversity and competition, a nonmigrating island model may optionally be used; this approach is particularly suited to many difficult (real-world) problems, which have a tendency to get stuck at (unknown) local minima. Results on three benchmark problems are presented and compared with those of earlier approaches. PCGA is found to produce diverse sampling of the Pareto-front without niching and with significantly less computational effort
Optimization techniques in respiratory control system models
One of the most complex physiological systems whose modeling is still an open study is the respiratory control system where different models have been proposed based on the criterion of minimizing the work of breathing (WOB). The aim of this study is twofold: to compare two known models of the respiratory control system which set the breathing pattern based on quantifying the respiratory work; and to assess the influence of using direct-search or evolutionary optimization algorithms on adjustment of model parameters. This study was carried out using experimental data from a group of healthy volunteers under CO2 incremental inhalation, which were used to adjust the model parameters and to evaluate how much the equations of WOB follow a real breathing pattern. This breathing pattern was characterized by the following variables: tidal volume, inspiratory and expiratory time duration and total minute ventilation. Different optimization algorithms were considered to determine the most appropriate model from physiological viewpoint. Algorithms were used for a double optimization: firstly, to minimize the WOB and secondly to adjust model parameters. The performance of optimization algorithms was also evaluated in terms of convergence rate, solution accuracy and precision. Results showed strong differences in the performance of optimization algorithms according to constraints and topological features of the function to be optimized. In breathing pattern optimization, the sequential quadratic programming technique (SQP) showed the best performance and convergence speed when respiratory work was low. In addition, SQP allowed to implement multiple non-linear constraints through mathematical expressions in the easiest way. Regarding parameter adjustment of the model to experimental data, the evolutionary strategy with covariance matrix and adaptation (CMA-ES) provided the best quality solutions with fast convergence and the best accuracy and precision in both models. CMAES reached the best adjustment because of its good performance on noise and multi-peaked fitness functions. Although one of the studied models has been much more commonly used to simulate respiratory response to CO2 inhalation, results showed that an alternative model has a more appropriate cost function to minimize WOB from a physiological viewpoint according to experimental data.Postprint (author's final draft
Exploring Task Mappings on Heterogeneous MPSoCs using a Bias-Elitist Genetic Algorithm
Exploration of task mappings plays a crucial role in achieving high
performance in heterogeneous multi-processor system-on-chip (MPSoC) platforms.
The problem of optimally mapping a set of tasks onto a set of given
heterogeneous processors for maximal throughput has been known, in general, to
be NP-complete. The problem is further exacerbated when multiple applications
(i.e., bigger task sets) and the communication between tasks are also
considered. Previous research has shown that Genetic Algorithms (GA) typically
are a good choice to solve this problem when the solution space is relatively
small. However, when the size of the problem space increases, classic genetic
algorithms still suffer from the problem of long evolution times. To address
this problem, this paper proposes a novel bias-elitist genetic algorithm that
is guided by domain-specific heuristics to speed up the evolution process.
Experimental results reveal that our proposed algorithm is able to handle large
scale task mapping problems and produces high-quality mapping solutions in only
a short time period.Comment: 9 pages, 11 figures, uses algorithm2e.st
Properties of Nucleon Resonances by means of a Genetic Algorithm
We present an optimization scheme that employs a Genetic Algorithm (GA) to
determine the properties of low-lying nucleon excitations within a realistic
photo-pion production model based upon an effective Lagrangian. We show that
with this modern optimization technique it is possible to reliably assess the
parameters of the resonances and the associated error bars as well as to
identify weaknesses in the models. To illustrate the problems the optimization
process may encounter, we provide results obtained for the nucleon resonances
(1230) and (1700). The former can be easily isolated and thus
has been studied in depth, while the latter is not as well known
experimentally.Comment: 12 pages, 10 figures, 3 tables. Minor correction
Multi-objective evolutionary optimization of sandwich structures: An evaluation by elitist non-dominated sorting evolution strategy
In this study, an application of evolutionary multi-objective optimization algorithms on the optimization of sandwich structures is presented. The solution strategy is known as Elitist Non-Dominated Sorting Evolution Strategy (ENSES) wherein Evolution Strategies (ES) as Evolutionary Algorithm (EA) in the elitist Non-dominated Sorting Genetic algorithm (NSGA-II) procedure. Evolutionary algorithm seems a compatible approach to resolve multi-objective optimization problems because it is inspired by natural evolution, which closely linked to Artificial Intelligence (AI) techniques and elitism has shown an important factor for improving evolutionary multi-objective search. In order to evaluate the notion of performance by ENSES, the well-known study case of sandwich structures are reconsidered. For Case 1, the goals of the multi-objective optimization are minimization of the deflection and the weight of the sandwich structures. The length, the core and skin thicknesses are the design variables of Case 1. For Case 2, the objective functions are the fabrication cost, the beam weight and the end deflection of the sandwich structures. There are four design variables i.e., the weld height, the weld length, the beam depth and the beam width in Case 2. Numerical results are presented in terms of Paretooptimal solutions for both evaluated cases
- …