On Modeling Geometric Joint Sink Mobility with Delay-Tolerant Cluster-less Wireless Sensor Networks

Moving Sink (MS) in Wireless Sensor Networks (WSNs) has appeared as a blessing because it collects data directly from the nodes where the concept of relay nodes is becomes obsolete. There are, however, a few challenges to be taken care of, like data delay tolerance and trajectory of MS which is NP-hard. In our proposed scheme, we divide the square field in small squares. Middle point of the partitioned area is the sojourn location of the sink, and nodes around MS are in its transmission range, which send directly the sensed data in a delay-tolerant fashion. Two sinks are moving simultaneously; one inside and having four sojourn locations and other in outer trajectory having twelve sojourn locations. Introduction of the joint mobility enhances network life and ultimately throughput. As the MS comes under the NP-hard problem, we convert it into a geometric problem and define it as, Geometric Sink Movement (GSM). A set of linear programming equations has also been given in support of GSM which prolongs network life time

A practical framework for data collection in wireless sensor networks

Optimizing energy consumption for extending the lifetime in wireless sensor networks is of dominant importance. Groups of autonomous robots and unmanned aerial vehicles (UAVs) acting as mobile data collectors are utilized to minimize the energy expenditure of the sensor nodes by approaching the sensors and collecting their buffers via single hop communication, rather than using multihop routing to forward the buffers to the base station. This paper models the sensor network and the mobile collectors as a system-of-systems, and defines all levels and types of interactions. A practical framework that facilitates deploying heterogeneous mobiles without prior knowledge about the sensor network is presented. Realizing the framework is done through simulation experiments and tested against several performance metrics.<br /

Using mobile sinks in wireless sensor networks to improve building emergency response.

We propose an opportunistic routing scheme for wireless sensor networks operating in volatile environments. In particular, we consider a sensor field for sensing and reporting on buildings during fires, where sensors are progressively being destroyed by the fire. We envisage firefighters equipped with small computers which can act as mobile sink nodes, offering transient shorter routes for relaying data, and offering connectivity to disconnected areas of the network. We examine different ways in which these uncontrolled mobile sinks could enhance performance, and develop protocols for advertising the presence of the mobile sinks, gathering data for forwarding, and prioritising disconnected regions. We evaluate the performance in simulation, and on randomly damaged networks, we show that we can increase the data delivery by up to 50%

Examination of Wireless Body Area Network Using Mobile Sinks

In the last few years, postural mobility has been seen as a significant barrier to the successful deployment of Wireless Body Area Networks (WBAN), and several mobility models have been put out to overcome this problem. Due to the sink node's fixed location in such topologies, WBAN performance was declining. The domains of other wireless networks including MANET, VANET, and FANET have successfully used Mobile Sink as a solution. The network lifespan and other QoS metrics like average end-to-end latency, PDR, throughput and energy consumption are significantly influenced by sink mobility. The random movement of the sink node is taken into account in this study effort to cope with the heterogeneity of network nodes and their movement pattern. Static and mobile sinks (Controlled and Random movements) are used to test both mobility models using Network Simulator NS2.35, and it was shown that mobile sinks improved WBAN performance for all QoS criteria

A Review of Energy Conservation in Wireless Sensor Networks

In wireless sensor networks, energy efficiency plays a major role to determine the lifetime of the network. The network is usually powered by a battery which is hard to recharge. Hence, one major challenge in wireless sensor networks is the issue of how to extend the lifetime of sensors to improve the efficiency. In order to reduce the rate at which the network consumes energy, researchers have come up with energy conservation techniques, schemes and protocols to solve the problem. This paper presents a brief overview of wireless sensor networks, outlines some causes of its energy loss and some energy conservation schemes based on existing techniques used in solving the problem of power management. Keywords: Wireless sensor network, Energy conservation, Duty cycling and Energy efficiency

Fast restoration of Connectivity for Wireless Sensor Networks

International audienceNode failures represent a fundamental problem in wireless sensor networks. Such failures may result in partitioned networks and lose of sensed information. A network recovery approach is thus necessary in order to ensure continuous network operations. In this paper, we propose CoMN2 a scalable and distributed approach for network recovery from node failures in wireless sensor networks. CoMN2 relies on a new concept called network mapping which consists in partitioning the network into several regions of increasing criticality. The criticality is set according to the energy, the traffic distribution and the deployment of nodes. Using this network mapping, our solution CoMN2 ensures the continuous network activity by efficiently swapping nodes from low critical area to highly critical area when required. Simulation results prove the effectiveness of our approach and show that the obtained improve-ment in terms of lifetime is in the order of 40%

Incorporate ACO routing algorithm and mobile sink in wireless sensor networks

Today, science and technology is developing, particularly the internet of things (IoT), there is an increasing demand in the sensor field to serve the requirements of individuals within modern life. Wireless sensor networks (WSNs) was created to assist us to modernize our lives, saving labor, avoid dangers, and that bring high efficiency at work. There are many various routing protocols accustomed to increase the ability efficiency and network lifetime. However, network systems with one settled sink frequently endure from a hot spots issue since hubs close sinks take a lot of vitality to forward information amid the transmission method. In this paper, the authors proposed combining the colony optimization algorithm ant colony optimization (ACO) routing algorithm and mobile sink to deal with that drawback and extend the network life. The simulation results on MATLAB show that the proposed protocol has far better performance than studies within the same field

Optimization of Energy Efficient Advance Leach Protocol

In WSNs, the only source to save life for the node is the battery consumption. During communication with other area nodes or sensing activities consumes a lot of power energy in processing the data and transmitting the collected/selected data to the sink. In wireless sensor networks, energy conservation is directly to the network lifetime and energy plays an important role in the cluster head selection. A new threshold has been formulated for cluster head selection, which is based on remaining energy of the sensor node and the distance from the base station. Proposed approach selects the cluster head nearer to base station having maximum remaining energy than any other sensor node in multi-hop communication. The multi hop approach minimizing the inter cluster communication without effecting the data reliability

Coordinated movement of multiple mobile sinks in a wireless sensor network for improved lifetime

Sink mobility is one of the most effective solutions for improving lifetime and has been widely investigated for the last decade. Algorithms for single-sink mobility are not directly applied to the multiple-sink case due to the latter’s specific challenges. Most of the approaches proposed in the literature use mathematical programming techniques to solve the multiple-sink mobility problem. However, doing so leads to higher complexities when traffic flow information for any possible sink-site combinations is included in the model. In this paper, we propose two algorithms that do not consider all possible sink-site combinations to determine migration points. We first present a centralized movement algorithm that uses an energy-cost matrix for a user-defined threshold number of combinations to coordinate multiple-sink movement. We also give a distributed algorithm that does not use any prior network information and has a low message exchange overhead. Our simulations show that the centralized algorithm gives better network lifetime performance compared to previously proposed MinDiff-RE, random movement, and static-sink algorithms. Our distributed algorithm has a lower network lifetime than centralized algorithms; sinks travel significantly less than in all the other schemes. © 2015, Koç and Korpeoglu

A Hybrid Adaptive Protocol for Reliable Data Delivery in WSNs with Multiple Mobile Sinks

In this paper we deal with reliable and energy-efficient data delivery in sparse Wireless Sensor Networks with multiple Mobile Sinks (MSs). This is a critical task, especially when MSs move randomly, as interactions with sensor nodes are unpredictable, typically of short duration, and affected by message losses. In this paper we propose an adaptive data delivery protocol that combines efficiently erasure coding with an ARQ scheme. The key features of the proposed protocol are: (i) the use of redundancy to cope efficiently with message losses, and (ii) the ability of adapting the level of redundancy based on feedbacks sent back by MSs through ACKs. We observed by simulation that our protocol outperforms an alternative protocol that relies only on an ARQ scheme, even when there is a single MS. We also validated our simulation results through a set of experimental measurements based on real sensor nodes. Our results show that the adoption of encoding techniques is beneficial to energy-efficient (and reliable) data delivery in WSNs with Mobile Sinks