System Identification of Bipedal Locomotion in Robots and Humans

The ability to perform a healthy walking gait can be altered in numerous cases due to gait disorder related pathologies. The latter could lead to partial or complete mobility loss, which affects the patients’ quality of life. Wearable exoskeletons and active prosthetics have been considered as a key component to remedy this mobility loss. The control of such devices knows numerous challenges that are yet to be addressed. As opposed to fixed trajectories control, real-time adaptive reference generation control is likely to provide the wearer with more intent control over the powered device. We propose a novel gait pattern generator for the control of such devices, taking advantage of the inter-joint coordination in the human gait. Our proposed method puts the user in the control loop as it maps the motion of healthy limbs to that of the affected one. To design such control strategy, it is critical to understand the dynamics behind bipedal walking. We begin by studying the simple compass gait walker. We examine the well-known Virtual Constraints method of controlling bipedal robots in the image of the compass gait. In addition, we provide both the mechanical and control design of an affordable research platform for bipedal dynamic walking. We then extend the concept of virtual constraints to human locomotion, where we investigate the accuracy of predicting lower limb joints angular position and velocity from the motion of the other limbs. Data from nine healthy subjects performing specific locomotion tasks were collected and are made available online. A successful prediction of the hip, knee, and ankle joints was achieved in different scenarios. It was also found that the motion of the cane alone has sufficient information to help predict good trajectories for the lower limb in stairs ascent. Better estimates were obtained using additional information from arm joints. We also explored the prediction of knee and ankle trajectories from the motion of the hip joints

Hybrid Zero Dynamics of Planar Biped Walkers

Planar, underactuated, biped walkers form an important domain of applications for hybrid dynamical systems. This paper presents the design of exponentially stable walking controllers for general planar bipedal systems that have one degree-of-freedom greater than the number of available actuators. The within-step control action creates an attracting invariant set—a two-dimensional zero dynamics submanifold of the full hybrid model—whose restriction dynamics admits a scalar linear time-invariant return map. Exponentially stable periodic orbits of the zero dynamics correspond to exponentially stabilizable orbits of the full model. A convenient parameterization of the hybrid zero dynamics is imposed through the choice of a class of output functions. Parameter optimization is used to tune the hybrid zero dynamics in order to achieve closed-loop, exponentially stable walking with low energy consumption, while meeting natural kinematic and dynamic constraints. The general theory developed in the paper is illustrated on a five link walker, consisting of a torso and two legs with knees

Metastable legged-robot locomotion

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2008.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Includes bibliographical references (p. 195-215).A variety of impressive approaches to legged locomotion exist; however, the science of legged robotics is still far from demonstrating a solution which performs with a level of flexibility, reliability and careful foot placement that would enable practical locomotion on the variety of rough and intermittent terrain humans negotiate with ease on a regular basis. In this thesis, we strive toward this particular goal by developing a methodology for designing control algorithms for moving a legged robot across such terrain in a qualitatively satisfying manner, without falling down very often. We feel the definition of a meaningful metric for legged locomotion is a useful goal in and of itself. Specifically, the mean first-passage time (MFPT), also called the mean time to failure (MTTF), is an intuitively practical cost function to optimize for a legged robot, and we present the reader with a systematic, mathematical process for obtaining estimates of this MFPT metric. Of particular significance, our models of walking on stochastically rough terrain generally result in dynamics with a fast mixing time, where initial conditions are largely "forgotten" within 1 to 3 steps. Additionally, we can often find a near-optimal solution for motion planning using only a short time-horizon look-ahead. Although we openly recognize that there are important classes of optimization problems for which long-term planning is required to avoid "running into a dead end" (or off of a cliff!), we demonstrate that many classes of rough terrain can in fact be successfully negotiated with a surprisingly high level of long-term reliability by selecting the short-sighted motion with the greatest probability of success. The methods used throughout have direct relevance to machine learning, providing a physics-based approach to reduce state space dimensionality and mathematical tools to obtain a scalar metric quantifying performance of the resulting reduced-order system.by Katie Byl.Ph.D

Robust and Economical Bipedal Locomotion

For bipedal robots to gain widespread use, significant improvements must be made in their energetic economy and robustness against falling. An increase in economy can increase their functional range, while a reduction in the rate of falling can reduce the need for human intervention. This dissertation explores novel concepts that improve these two goals in a fundamental manner. By centering on core ideas instead of direct application, these concepts are aimed at influencing a wide range of current and future legged robots. The presented work can be broken into five major contributions. The first extends our understanding of the energetic economy of series elastic walking robots. This investigation uses trajectory optimization to find energy-miminizing periodic motions for a realistic model of the walking robot RAMone. The energetically optimal motions for this model are shown to closely resemble human walking at low speeds, and as the speed increases, the motions switch abruptly to those resembling human running. The second contribution explores the energetic economy of the real robot RAMone. Here the model used in the previous investigation is shown to closely match reality. In addition, this investigation demonstrates a concrete example of a trade-off between energetic economy and robustness. The third contribution takes a step towards addressing this trade-off by deriving a robot constraint that guarantees safety against falling. Such a constraint can be used to remove considerations of robustness while conducting future investigations into economical robot motions. The approach is demonstrated using a simple compass-gait style walking model. The fourth contribution extends this safety constraint towards higher-dimensional walking models, using a combination of hybrid zero dynamics and sums-of-squares analysis. This is demonstrated by safely modifying the pitch of a 10 dimensional Rabbit model walking over flat terrain. The final contribution pushes the safety guarantee towards a broader set of walking behaviours, including rough terrain walking. Throughout this work, a range of models are used to reason about the economy and robustness of walking robots. These model-based methods allow control designers to move away from heuristics and tuning, and towards generalizable and reliable controllers. This is vital for walking robots to push further into the wild.PHDMechanical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/153459/1/nilssmit_1.pd

Optimal control of an underactuated bipedal robot

Bipedal robots represent a unique class of control problems that combine many of the most difficult elements of nonlinear control. These robots are typically designed to be mobile and as such have limited energy and actuator authority making efficiency a prime concern. Unlike wheeled robots, legged robots must transition between different equations of motion as legs make and break contact with the ground, aggravating the complexities of hybrid dynamics. Furthermore, small feet and series elastic actuation of joints leads to an underactuated system, causing traditional nonlinear control methods to struggle. This thesis describes and validates a general framework for efficiently controlling systems with the properties most problematic in bipedal robots, i.e., nonlinearity, hybrid dynamics, and underactuation. This process is two-step in that, first, an optimal trajectory is generated using direct collocation trajectory optimization, and second, the feasible trajectory is stabilized using a time varying linear quadratic regulator. We demonstrate this process on a number of toy problems including the triple pendulum on a cart and a reduced order template for a running robot. This approach is then applied to the bipedal robot ATRIAS in simulation in order to achieve efficient, dynamic, and robust locomotion behaviors

Climbing and Walking Robots

Nowadays robotics is one of the most dynamic fields of scientific researches. The shift of robotics researches from manufacturing to services applications is clear. During the last decades interest in studying climbing and walking robots has been increased. This increasing interest has been in many areas that most important ones of them are: mechanics, electronics, medical engineering, cybernetics, controls, and computers. Today’s climbing and walking robots are a combination of manipulative, perceptive, communicative, and cognitive abilities and they are capable of performing many tasks in industrial and non- industrial environments. Surveillance, planetary exploration, emergence rescue operations, reconnaissance, petrochemical applications, construction, entertainment, personal services, intervention in severe environments, transportation, medical and etc are some applications from a very diverse application fields of climbing and walking robots. By great progress in this area of robotics it is anticipated that next generation climbing and walking robots will enhance lives and will change the way the human works, thinks and makes decisions. This book presents the state of the art achievments, recent developments, applications and future challenges of climbing and walking robots. These are presented in 24 chapters by authors throughtot the world The book serves as a reference especially for the researchers who are interested in mobile robots. It also is useful for industrial engineers and graduate students in advanced study

Control Implementation of Dynamic Locomotion on Compliant, Underactuated, Force-Controlled Legged Robots with Non-Anthropomorphic Design

The control of locomotion on legged robots traditionally involves a robot that takes a standard legged form, such as the anthropomorphic humanoid, the dog-like quadruped, or the bird-like biped. Additionally, these systems will often be actuated with position-controlled servos or series-elastic actuators that are connected through rigid links. This work investigates the control implementation of dynamic, force-controlled locomotion on a family of legged systems that significantly deviate from these classic paradigms by incorporating modern, state-of-the-art proprioceptive actuators on uniquely configured compliant legs that do not closely resemble those found in nature. The results of this work can be used to better inform how to implement controllers on legged systems without stiff, position-controlled actuators, and also provide insight on how intelligently designed mechanical features can potentially simplify the control of complex, nonlinear dynamical systems like legged robots. To this end, this work presents the approach to control for a family of non-anthropomorphic bipedal robotic systems which are developed both in simulation and with physical hardware. The first is the Non-Anthropomorphic Biped, Version 1 (NABi-1) that features position-controlled joints along with a compliant foot element on a minimally actuated leg, and is controlled using simple open-loop trajectories based on the Zero Moment Point. The second system is the second version of the non-anthropomorphic biped (NABi-2) which utilizes the proprioceptive Back-drivable Electromagnetic Actuator for Robotics (BEAR) modules for actuation and fully realizes feedback-based force controlled locomotion. These systems are used to highlight both the strengths and weaknesses of utilizing proprioceptive actuation in systems, and suggest the tradeoffs that are made when using force control for dynamic locomotion. These systems also present case studies for different approaches to system design when it comes to bipedal legged robots