DC-Informative Joint Color-Frequency Modulation for Visible Light Communications

In this paper, we consider the problem of constellation design for a visible light communication (VLC) system using red/green/blue light-emitting diodes (RGB LED), and propose a method termed DC-informative joint color-frequency modulation (DCI-JCFM). This method jointly utilizes available diversity resources including different optical wavelengths, multiple baseband subcarriers, and adaptive DC-bias. Constellation is designed in a high dimensional space, where the compact sphere packing advantage over lower dimensional counterparts is utilized. Taking into account multiple practical illumination constraints, a non-convex optimization problem is formulated, seeking the least error rate with a fixed spectral efficiency. The proposed scheme is compared with a decoupled scheme, where constellation is designed separately for each LED. Notable gains for DCI-JCFM are observed through simulations where balanced, unbalanced and very unbalanced color illuminations are considered.Comment: submitted to Journal of Lightwave Technology, Aug. 5th 201

Ellipse-based DCO-OFDM for visible light communications

Ellipse-based DC-biased optical orthogonal frequency division multiplexing (E-DCO-OFDM) is proposed for visible light communications (VLC), which achieves a significant peak-to-average power ratio (PAPR) reduction, thus enhancing the overall performance when light-emitting diode (LED) nonlinearity is considered. In E-DCO-OFDM, the real-valued output of OFDM is modulated onto an ellipse, whereby only the imaginary part of the complex point on the ellipse is transmitted. Although the PAPR of E-DCO-OFDM decreases as the ratio of major radius to minor radius becomes larger, it may be more vulnerable to the effect of noise, leading to the performance loss. Therefore, the relationship between the system performance and the critical parameters in E-DCO-OFDM, such as the ratio between the major and minor radius of the ellipse, is investigated. Meanwhile, simulations demonstrate that E-DCO-OFDM adopting the optimal parameters achieves a considerable signal-to-noise ratio (SNR) gain over the conventional DCO-OFDM

The Spatial Dimming Scheme for the MU-MIMO-OFDM VLC System

Multiuser visible light communication (MU-VLC) systems utilizing multiple-input multiple-output (MIMO) and orthogonal frequency-division multiplexing (OFDM) are gaining increased attentions recently. Visible light communication (VLC) links are expected to work under different illumination conditions and, thus, the need for dimming control mechanisms. However, the traditional analog- and digital-based dimming schemes have adverse effects on the data communications performance, such as clipping distortion and the variation of the duty cycle. In this paper, spatial dimming schemes based on the zero-forcing and the minimum mean-squared error precoding schemes are proposed for direct-current biased optical OFDM based indoor MU-MIMO VLC system, and the bipolar optical OFDM signal is biased by a fixed dc level. Transmit antenna selection algorithms are designed for the optimum working light emitting diodes (LEDs) subset at each dimming level. Owing to the simultaneously exploration of the selection diversity of LEDs-based lights and the channel state information, the proposed spatial dimming schemes outperform the traditional dimming schemes, which is also verified by simulation results. Thus, the proposed schemes are shown to have a great potential to be applied in practical MU-MIMO-OFDM VLC systems

A novel OFDM format and a machine learning based dimming control for lifi

This paper proposes a new hybrid orthogonal frequency division multiplexing (OFDM) form termed as DC‐biased pulse amplitude modulated optical OFDM (DPO‐OFDM) by combining the ideas of the existing DC‐biased optical OFDM (DCO‐OFDM) and pulse amplitude modulated discrete multitone (PAM‐DMT). The analysis indicates that the required DC‐bias for DPO‐OFDM-based light fidelity (LiFi) depends on the dimming level and the components of the DPO‐OFDM. The bit error rate (BER) performance and dimming flexibility of the DPO‐OFDM and existing OFDM schemes are evaluated using MATLAB tools. The results show that the proposed DPO‐OFDM is power efficient and has a wide dimming range. Furthermore, a switching algorithm is introduced for LiFi, where the individual components of the hybrid OFDM are switched according to a target dimming level. Next, machine learning algorithms are used for the first time to find the appropriate proportions of the hybrid OFDM components. It is shown that polynomial regression of degree 4 can reliably predict the constellation size of the DCO‐OFDM component of DPO‐OFDM for a given constellation size of PAM‐DMT. With the component switching and the machine learning algorithms, DPO‐OFDM‐based LiFi is power efficient at a wide dimming range. © 2021 by the authors. Licensee MDPI, Basel, Switzerland

Index Modulation-Aided OFDM for Visible Light Communications

Index modulation-aided orthogonal frequency-division multiplexing(IM-OFDM) is a promising modulation technique to achieve high spectral and energy efficiency. In this chapter, the conventional optical OFDM schemes are firstly reviewed, followed by the principles of IM-OFDM. The application of IM-OFDM in visible light communication (VLC) systems is introduced, and its performance is compared with conventional optical OFDM, which verifies its superiority. Finally, the challenges and opportunities of IM-OFDM are discussed for the VLC applications

Spectrum and energy efficient digital modulation techniques for practical visible light communication systems

The growth in mobile data traffic is rapidly increasing in an unsustainable direction given the radio frequency (RF) spectrum limits. Visible light communication (VLC) offers a lucrative solution based on an alternative license-free frequency band that is safe to use and inexpensive to utilize. Improving the spectral and energy efficiency of intensity modulation and direct detection (IM/DD) systems is still an on-going challenge in VLC. The energy efficiency of inherently unipolar modulation techniques such as pulse-amplitude modulation discrete multitone modulation (PAM-DMT) and asymmetrically clipped optical orthogonal frequency division multiplexing (ACO-OFDM) degrades at high spectral efficiency. Two novel superposition modulation techniques are proposed in this thesis based on PAM-DMT and ACO-OFDM. In addition, a practical solution based on the computationally efficient augmented spectral efficiency discrete multi-tone (ASE-DMT) is proposed. The system performance of the proposed superposition modulation techniques offers significant electrical and optical power savings with up to 8 dB in the electrical signal-to-noise ratio (SNR) when compared with DC-biased optical orthogonal frequency division multiplexing (DCO-OFDM). The theoretical bit error ratio (BER) performance bounds for all of the proposed modulation techniques are in agreement with the Monte-Carlo simulation results. The proposed superposition modulation techniques are promising candidates for spectrum and energy efficient IM/DD systems. Two experimental studies are presented for a VLC system based on DCO-OFDM with adaptive bit and energy loading. Micrometer-sized Gallium Nitride light emitting diode (m-LED) and light amplification by stimulated emission of radiation diode (LD) are used in these studies due to their high modulation bandwidth. Record data rates are achieved with a BER below the forward error correction (FEC) threshold at 7.91 Gb/s using the violet m-LED and at 15 Gb/s using the blue LD. These results highlight the potential of VLC systems in practical high speed communication solutions. An additional experimental study is demonstrated for the proposed superposition modulation techniques based on ASE-DMT. The experimentally achieved results confirm the theoretical and simulation based performance predictions of ASE-DMT. A significant gain of up to 17.33 dB in SNR is demonstrated at a low direct current (DC) bias. Finally, the perception that VLC systems cannot work under the presence of sunlight is addressed in this thesis. A complete framework is presented to evaluate the performance of VLC systems in the presence of solar irradiance at any given location and time. The effect of sunlight is investigated in terms of the degradations in SNR, data rate and BER. A reliable high speed communication system is achieved under the sunlight effect. An optical bandpass blue filter is shown to compensate for half of the reduced data rate in the presence of sunlight. This thesis demonstrates data rates above 1 Gb/s for a practical VLC link under strong solar illuminance measured at 50350 lux in clear weather conditions

Design and implementation of an uplink connection for a light-based IoT node

Abstract. In the wake of soaring demand for shrinking radio frequency (RF) spectrum, light-fidelity (LiFi) has been heralded as a solution to accommodate resources for future communication networks. Infrared (IR) and visible light communication (VLC) are meant to be used within LiFi because of numerous advantages. By combining the paradigm of internet of things (IoT) along with LiFi, light-based IoT (LIoT) emerges as a potential enabler of future 6G networks. With tremendous number of interconnected devices, LIoT nodes need to be able to receive and transmit data while being energy autonomous. One of the most promising clean energy sources comes from both natural and artificial light. In addition to providing illumination and energy, light can also be utilized as a robust information carrier. In order to provide bidirectional connectivity to LIoT node, both downlink and uplink have to be taken into consideration. Whereas downlink relies on visible light as a carrier, uplink approach can be engineered freely within specific requirements. With this in mind, this master’s thesis explores possible solutions for providing uplink connectivity. After analysis of possible solutions, the LIoT proof-of-concept was designed, implemented and validated. By incorporating printed solar cell, dedicated energy harvesting unit, power-optimised microcontroller unit (MCU) and light intensity sensor the LIoT node is able to autonomously transmit data using IR

PAPR reduction in multicarrier modulation techniques based visible light communication systems

Visible light communication (VLC) is an optical wireless communication (OWC) technology that has the potential to provide high data rate transmission for indoor applications. VLC is a promising alternative technology with a large and unlicensed spectrum to complement the congested radio frequency (RF) based communication in order to meet the exponential growth and popularity of smart devices, data intensive services and applications. The use of low-cost commercially available front-end devices further highlights the attraction of VLC system. However, nonlinear dynamic range of front-end devices and optical channel impairments limit full exploitation of VLC available modulation bandwidth. To fully benefit from the inherent resources and mitigate these limitations, multicarrier modulation (MCM) techniques are adopted. However, these techniques are affected by high peak-to-average power ratio (PAPR) which imposes constraints on the limited dynamic range of the front-end devices and the average radiated optical power. The main focus throughout this thesis is to reduce the high PAPR of MCM modulation techniques-based VLC system by implementing pilot-assisted (PA) technique. Additionally, performance of PAPR reduced modulation techniques is investigated through analytical, simulation, and experimentally. This thesis first presents background of VLC system principles including the front-end devices, VLC channel, system impairments and challenges, and employed solutions. The principles, limitations, and performance of MCM modulation variants that are implemented in this work are presented. Moreover, principles of PAPR challenge in MCM based VLC, PAPR evaluation, impact on the transmitted signal as well as the existing PAPR reduction techniques are discussed. Looking at the gap, a PA is implemented as PAPR reduction technique which is presented in this work including its implementation and performance. Following that, multiple experimental studies on PAPR reduction of PA technique are presented. Two experimental demonstrations on the efficacy of PA PAPR reduction for PAM-DMT and DCO-OFDM based VLC using a single blue LED are presented. These studies are comparing the bit-error-rate (BER) performance of the proposed systems with conventional counterparts over a range of sampling rate. This shows that, the proposed systems perform better than conventional systems without PAPR reduction. The results are validated through simulation. Other two experimental studies on the previous systems with parameters optimisation and available modulation bandwidth utilisation are presented, which show that the proposed systems outperform the conventional systems in terms of BER. This is followed by investigating the PA PAPR reduction effect on the achievable data rate of a wavelength division multiplexing (WDM) based VLC system using three different LEDs for PAPR reduced DCO-OFDM and PAM-DMT systems. The proposed systems have achieved more than 8% data rate higher than that of conventional systems without BER performance degradation. Finally, analytical investigation of clipping noise that leads to distortion in a VLC system due to front-end devices limitations is presented. To mitigate the clipping noise, PAPR of the system is reduced by the PA technique. The analytical BER performance of the system with PAPR reduction is verified through simulation and then compared to that of the conventional system without PAPR reduction at similar clipping levels. The PA proposed system shows better BER performance at all clipping levels

Indoor Visible Light Communication:A Tutorial and Survey

Abstract With the advancement of solid-state devices for lighting, illumination is on the verge of being completely restructured. This revolution comes with numerous advantages and viable opportunities that can transform the world of wireless communications for the better. Solid-state LEDs are rapidly replacing the contemporary incandescent and fluorescent lamps. In addition to their high energy efficiency, LEDs are desirable for their low heat generation, long lifespan, and their capability to switch on and off at an extremely high rate. The ability of switching between different levels of luminous intensity at such a rate has enabled the inception of a new communication technology referred to as visible light communication (VLC). With this technology, the LED lamps are additionally being used for data transmission. This paper provides a tutorial and a survey of VLC in terms of the design, development, and evaluation techniques as well as current challenges and their envisioned solutions. The focus of this paper is mainly directed towards an indoor setup. An overview of VLC, theory of illumination, system receivers, system architecture, and ongoing developments are provided. We further provide some baseline simulation results to give a technical background on the performance of VLC systems. Moreover, we provide the potential of incorporating VLC techniques in the current and upcoming technologies such as fifth-generation (5G), beyond fifth-generation (B5G) wireless communication trends including sixth-generation (6G), and intelligent reflective surfaces (IRSs) among others