A robust video encoding scheme to enhance error concealment of intra frames

In this paper a robust encoding scheme is proposed to improve the visual quality of HEVC decoded video when intra frames are lost along the streaming path. For this purpose, the encoding process includes frame loss simulation and subsequent error concealment, to find the most efficient method that should be used by a decoder to recover lost intra frames. In this novel scheme, each image is divided into partitions, which are associated with the error concealment method that achieves the lowest distortion. Then this information is signalled to the decoder through SEI messages in the coded stream. In order to efficiently use the signalling overhead, rate-distortion optimisation is used to achieve the best trade-off between the number of transmitted symbols and distortion of reconstructed frames. Experimental results show the effectiveness of the proposed method to enhance the quality of reconstructed intra frames under different packet loss ratios (PLR). For PLR=10%, the robust coding scheme is able to improve the average PSNR of all frames affected by errors, up to 1.50 dB and 3.44 dB in Low-Delay and Random-Access configurations respectively, at a maximum overhead cost of 0.24%

Error resilience and concealment techniques for high-efficiency video coding

This thesis investigates the problem of robust coding and error concealment in High Efficiency Video Coding (HEVC). After a review of the current state of the art, a simulation study about error robustness, revealed that the HEVC has weak protection against network losses with significant impact on video quality degradation. Based on this evidence, the first contribution of this work is a new method to reduce the temporal dependencies between motion vectors, by improving the decoded video quality without compromising the compression efficiency. The second contribution of this thesis is a two-stage approach for reducing the mismatch of temporal predictions in case of video streams received with errors or lost data. At the encoding stage, the reference pictures are dynamically distributed based on a constrained Lagrangian rate-distortion optimization to reduce the number of predictions from a single reference. At the streaming stage, a prioritization algorithm, based on spatial dependencies, selects a reduced set of motion vectors to be transmitted, as side information, to reduce mismatched motion predictions at the decoder. The problem of error concealment-aware video coding is also investigated to enhance the overall error robustness. A new approach based on scalable coding and optimally error concealment selection is proposed, where the optimal error concealment modes are found by simulating transmission losses, followed by a saliency-weighted optimisation. Moreover, recovery residual information is encoded using a rate-controlled enhancement layer. Both are transmitted to the decoder to be used in case of data loss. Finally, an adaptive error resilience scheme is proposed to dynamically predict the video stream that achieves the highest decoded quality for a particular loss case. A neural network selects among the various video streams, encoded with different levels of compression efficiency and error protection, based on information from the video signal, the coded stream and the transmission network. Overall, the new robust video coding methods investigated in this thesis yield consistent quality gains in comparison with other existing methods and also the ones implemented in the HEVC reference software. Furthermore, the trade-off between coding efficiency and error robustness is also better in the proposed methods

Enhanced Rateless Coding and Compressive Sensing for Efficient Data/multimedia Transmission and Storage in Ad-hoc and Sensor Networks

In this dissertation, we investigate the theory and applications of the novel class of FEC codes called rateless or fountain codes in video transmission and wireless sensor networks (WSN). First, we investigate the rateless codes in intermediate region where the number of received encoded symbols is less that minimum required for full datablock decoding. We devise techniques to improve the input symbol recovery rate when the erasure rate is unknown, and also for the case where an estimate of the channel erasure rate is available. Further, we design unequal error protection (UEP) rateless codes for distributed data collection of data blocks of unequal lengths, where two encoders send their rateless coded output symbols to a destination through a common relay. We design such distributed rateless codes, and jointly optimize rateless coding parameters at each nodes and relaying parameters. Moreover, we investigate the performance of rateless codes with finite block length in the presence of feedback channel. We propose a smart feedback generation technique that greatly improves the performance of rateless codes when data block is finite. Moreover, we investigate the applications of UEP-rateless codes in video transmission systems. Next, we study the optimal cross-layer design of a video transmission system with rateless coding at application layer and fixed-rate coding (RCPC coding) at physical layer. Finally, we review the emerging compressive sensing (CS) techniques that have close connections to FEC coding theory, and designed an efficient data storage algorithm for WSNs employing CS referred to by CStorage. First, we propose to employ probabilistic broadcasting (PB) to form one CS measurement at each node and design CStorage- P. Later, we can query any arbitrary small subset of nodes and recover all sensors reading. Next, we design a novel parameterless and more efficient data dissemination algorithm that uses two-hop neighbor information referred to alternating branches (AB).We replace PB with AB and design CStorage-B, which results in a lower number of transmissions compared to CStorage-P.Electrical Engineerin

Multimedia over wireless ip networks:distortion estimation and applications.

2006/2007This thesis deals with multimedia communication over unreliable and resource constrained IP-based packet-switched networks. The focus is on estimating, evaluating and enhancing the quality of streaming media services with particular regard to video services. The original contributions of this study involve mainly the development of three video distortion estimation techniques and the successive definition of some application scenarios used to demonstrate the benefits obtained applying such algorithms. The material presented in this dissertation is the result of the studies performed within the Telecommunication Group of the Department of Electronic Engineering at the University of Trieste during the course of Doctorate in Information Engineering. In recent years multimedia communication over wired and wireless packet based networks is exploding. Applications such as BitTorrent, music file sharing, multimedia podcasting are the main source of all traffic on the Internet. Internet radio for example is now evolving into peer to peer television such as CoolStreaming. Moreover, web sites such as YouTube have made publishing videos on demand available to anyone owning a home video camera. Another challenge in the multimedia evolution is inside the house where videos are distributed over local WiFi networks to many end devices around the house. More in general we are assisting an all media over IP revolution, with radio, television, telephony and stored media all being delivered over IP wired and wireless networks. All the presented applications require an extreme high bandwidth and often a low delay especially for interactive applications. Unfortunately the Internet and the wireless networks provide only limited support for multimedia applications. Variations in network conditions can have considerable consequences for real-time multimedia applications and can lead to unsatisfactory user experience. In fact, multimedia applications are usually delay sensitive, bandwidth intense and loss tolerant applications. In order to overcame this limitations, efficient adaptation mechanism must be derived to bridge the application requirements with the transport medium characteristics. Several approaches have been proposed for the robust transmission of multimedia packets; they range from source coding solutions to the addition of redundancy with forward error correction and retransmissions. Additionally, other techniques are based on developing efficient QoS architectures at the network layer or at the data link layer where routers or specialized devices apply different forwarding behaviors to packets depending on the value of some field in the packet header. Using such network architecture, video packets are assigned to classes, in order to obtain a different treatment by the network; in particular, packets assigned to the most privileged class will be lost with a very small probability, while packets belonging to the lowest priority class will experience the traditional best–effort service. But the key problem in this solution is how to assign optimally video packets to the network classes. One way to perform the assignment is to proceed on a packet-by-packet basis, to exploit the highly non-uniform distortion impact of compressed video. Working on the distortion impact of each individual video packet has been shown in recent years to deliver better performance than relying on the average error sensitivity of each bitstream element. The distortion impact of a video packet can be expressed as the distortion that would be introduced at the receiver by its loss, taking into account the effects of both error concealment and error propagation due to temporal prediction. The estimation algorithms proposed in this dissertation are able to reproduce accurately the distortion envelope deriving from multiple losses on the network and the computational complexity required is negligible in respect to those proposed in literature. Several tests are run to validate the distortion estimation algorithms and to measure the influence of the main encoder-decoder settings. Different application scenarios are described and compared to demonstrate the benefits obtained using the developed algorithms. The packet distortion impact is inserted in each video packet and transmitted over the network where specialized agents manage the video packets using the distortion information. In particular, the internal structure of the agents is modified to allow video packets prioritization using primarily the distortion impact estimated by the transmitter. The results obtained will show that, in each scenario, a significant improvement may be obtained with respect to traditional transmission policies. The thesis is organized in two parts. The first provides the background material and represents the basics of the following arguments, while the other is dedicated to the original results obtained during the research activity. Referring to the first part in the first chapter it summarized an introduction to the principles and challenges for the multimedia transmission over packet networks. The most recent advances in video compression technologies are detailed in the second chapter, focusing in particular on aspects that involve the resilience to packet loss impairments. The third chapter deals with the main techniques adopted to protect the multimedia flow for mitigating the packet loss corruption due to channel failures. The fourth chapter introduces the more recent advances in network adaptive media transport detailing the techniques that prioritize the video packet flow. The fifth chapter makes a literature review of the existing distortion estimation techniques focusing mainly on their limitation aspects. The second part of the thesis describes the original results obtained in the modelling of the video distortion deriving from the transmission over an error prone network. In particular, the sixth chapter presents three new distortion estimation algorithms able to estimate the video quality and shows the results of some validation tests performed to measure the accuracy of the employed algorithms. The seventh chapter proposes different application scenarios where the developed algorithms may be used to enhance quickly the video quality at the end user side. Finally, the eight chapter summarizes the thesis contributions and remarks the most important conclusions. It also derives some directions for future improvements. The intent of the entire work presented hereafter is to develop some video distortion estimation algorithms able to predict the user quality deriving from the loss on the network as well as providing the results of some useful applications able to enhance the user experience during a video streaming session.Questa tesi di dottorato affronta il problema della trasmissione efficiente di contenuti multimediali su reti a pacchetto inaffidabili e con limitate risorse di banda. L’obiettivo è quello di ideare alcuni algoritmi in grado di predire l’andamento della qualità del video ricevuto da un utente e successivamente ideare alcune tecniche in grado di migliorare l’esperienza dell’utente finale nella fruizione dei servizi video. In particolare i contributi originali del presente lavoro riguardano lo sviluppo di algoritmi per la stima della distorsione e l’ideazione di alcuni scenari applicativi in molto frequenti dove poter valutare i benefici ottenibili applicando gli algoritmi di stima. I contributi presentati in questa tesi di dottorato sono il risultato degli studi compiuti con il gruppo di Telecomunicazioni del Dipartimento di Elettrotecnica Elettronica ed Informatica (DEEI) dell’Università degli Studi di Trieste durante il corso di dottorato in Ingegneria dell’Informazione. Negli ultimi anni la multimedialità, diffusa sulle reti cablate e wireless, sta diventando parte integrante del modo di utilizzare la rete diventando di fatto il fenomeno più imponente. Applicazioni come BitTorrent, la condivisione di file musicali e multimediali e il podcasting ad esempio costituiscono una parte significativa del traffico attuale su Internet. Quelle che negli ultimi anni erano le prime radio che trsmettevano sulla rete oggi si stanno evolvendo nei sistemi peer to peer per più avanzati per la diffusione della TV via web come CoolStreaming. Inoltre siti web come YouTube hanno costruito il loro business sulla memorizzazione/ distribuzione di video creati da chiunque abbia una semplice video camera. Un’altra caratteristica dell’imponente rivoluzione multimediale a cui stiamo assistendo è la diffusione dei video anche all’interno delle case dove i contenuti multimediali vengono distribuiti mediante delle reti wireless locali tra i vari dispositivi finali. Tutt’oggi è in corso una rivoluzione della multimedialità sulle reti IP con le radio, i televisioni, la telefonia e tutti i video che devono essere distribuiti sulle reti cablate e wireless verso utenti eterogenei. In generale la gran parte delle applicazioni multimediali richiedono una banda elevata e dei ritardi molto contenuti specialmente se le applicazioni sono di tipo interattivo. Sfortunatamente le reti wireless e Internet più in generale sono in grado di fornire un supporto limitato alle applicazioni multimediali. La variabilità di banda, di ritardo e nella perdita possono avere conseguenze gravi sulla qualità con cui viene ricevuto il video e questo può portare a una parziale insoddisfazione o addirittura alla rinuncia della fruizione da parte dell’utente finale. Le applicazioni multimediali sono spesso sensibili al ritardo e con requisiti di banda molto stringenti ma di fatto rimango tolleranti nei confronti delle perdite che possono avvenire durante la trasmissione. Al fine di superare le limitazioni è necessario sviluppare dei meccanismi di adattamento in grado di fare da ponte fra i requisiti delle applicazioni multimediali e le caratteristiche offerte dal livello di trasporto. Diversi approcci sono stati proposti in passato in letteratura per migliorare la trasmissione dei pacchetti riducendo le perdite; gli approcci variano dalle soluzioni di compressione efficiente all’aggiunta di ridondanza con tecniche di forward error correction e ritrasmissioni. Altre tecniche si basano sulla creazione di architetture di rete complesse in grado di garantire la QoS a livello rete dove router oppure altri agenti specializzati applicano diverse politiche di gestione del traffico in base ai valori contenuti nei campi dei pacchetti. Mediante queste architetture il traffico video viene marcato con delle classi di priorità al fine di creare una differenziazione nel traffico a livello rete; in particolare i pacchetti con i privilegi maggiori vengono assegnati alle classi di priorità più elevate e verranno persi con probabilità molto bassa mentre i pacchetti appartenenti alle classi di priorità inferiori saranno trattati alla stregua dei servizi di tipo best-effort. Uno dei principali problemi di questa soluzione riguarda come assegnare in maniera ottimale i singoli pacchetti video alle diverse classi di priorità. Un modo per effettuare questa classificazione è quello di procedere assegnando i pacchetti alle varie classi sulla base dell’importanza che ogni pacchetto ha sulla qualità finale. E’ stato dimostrato in numerosi lavori recenti che utilizzando come meccanismo per l’adattamento l’impatto sulla distorsione finale, porta significativi miglioramenti rispetto alle tecniche che utilizzano come parametro la sensibilità media del flusso nei confronti delle perdite. L’impatto che ogni pacchetto ha sulla qualità può essere espresso come la distorsione che viene introdotta al ricevitore se il pacchetto viene perso tenendo in considerazione gli effetti del recupero (error concealment) e la propagazione dell’errore (error propagation) caratteristica dei più recenti codificatori video. Gli algoritmi di stima della distorsione proposti in questa tesi sono in grado di riprodurre in maniera accurata l’inviluppo della distorsione derivante sia da perdite isolate che da perdite multiple nella rete con una complessità computazionale minima se confrontata con le più recenti tecniche di stima. Numerose prove sono stati effettuate al fine di validare gli algoritmi di stima e misurare l’influenza dei principali parametri di codifica e di decodifica. Al fine di enfatizzare i benefici ottenuti applicando gli algoritmi di stima della distorsione, durante la tesi verranno presentati alcuni scenari applicativi dove l’applicazione degli algoritmi proposti migliora sensibilmente la qualità finale percepita dagli utenti. Tali scenari verranno descritti, implementati e accuratamente valutati. In particolare, la distorsione stimata dal trasmettitore verrà incapsulata nei pacchetti video e, trasmessa nella rete dove agenti specializzati potranno agevolmente estrarla e utilizzarla come meccanismo rate-distortion per privilegiare alcuni pacchetti a discapito di altri. In particolare la struttura interna di un agente (un router) verrà modificata al fine di consentire la differenziazione del traffico utilizzando l’informazione dell’impatto che ogni pacchetto ha sulla qualità finale. I risultati ottenuti anche in termini di ridotta complessità computazionale in ogni scenario applicativo proposto mettono in luce i benefici derivanti dall’implementazione degli algoritmi di stima. La presenti tesi di dottorato è strutturata in due parti principali; la prima fornisce il background e rappresenta la base per tutti gli argomenti trattati nel seguito mentre la seconda parte è dedicata ai contributi originali e ai risultati ottenuti durante l’intera attività di ricerca. In riferimento alla prima parte in particolare un’introduzione ai principi e alle opportunità offerte dalla diffusione dei servizi multimediali sulle reti a pacchetto viene esposta nel primo capitolo. I progressi più recenti nelle tecniche di compressione video vengono esposti dettagliatamente nel secondo capitolo che si focalizza in particolare solo sugli aspetti che riguardano le tecniche per la mitigazione delle perdite. Il terzo capitolo introduce le principali tecniche per proteggere i flussi multimediali e ridurre le perdite causate dai fenomeni caratteristici del canale. Il quarto capitolo descrive i recenti avanzamenti nelle tecniche di network adaptive media transport illustrando i principali metodi utilizzati per differenziare il traffico video. Il quinto capitolo analizza i principali contributi nella letteratura sulle tecniche di stima della distorsione e si focalizza in particolare sulle limitazioni dei metodi attuali. La seconda parte della tesi descrive i contributi originali ottenuti nella modellizzazione della distorsione video derivante dalla trasmissione sulle reti con perdite. In particolare il sesto capitolo presenta tre nuovi algoritmi in grado di riprodurre fedelmente l’inviluppo della distorsione video. I numerosi test e risultati verranno proposti al fine di validare gli algoritmi e misurare l’accuratezza nella stima. Il settimo capitolo propone diversi scenari applicativi dove gli algoritmi sviluppati possono essere utilizzati per migliorare in maniera significativa la qualità percepita dall’utente finale. Infine l’ottavo capitolo sintetizza l’intero lavoro svolto e i principali risultati ottenuti. Nello stesso capitolo vengono inoltre descritti gli sviluppi futuri dell’attività di ricerca. L’obiettivo dell’intero lavoro presentato è quello di mostrare i benefici derivanti dall’utilizzo di nuovi algoritmi per la stima della distorsione e di fornire alcuni scenari applicativi di utilizzo.XIX Ciclo197

End-to-end 3D video communication over heterogeneous networks

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Three-dimensional technology, more commonly referred to as 3D technology, has revolutionised many fields including entertainment, medicine, and communications to name a few. In addition to 3D films, games, and sports channels, 3D perception has made tele-medicine a reality. By the year 2015, 30% of the all HD panels at home will be 3D enabled, predicted by consumer electronics manufacturers. Stereoscopic cameras, a comparatively mature technology compared to other 3D systems, are now being used by ordinary citizens to produce 3D content and share at a click of a button just like they do with the 2D counterparts via sites like YouTube. But technical challenges still exist, including with autostereoscopic multiview displays. 3D content requires many complex considerations--including how to represent it, and deciphering what is the best compression format--when considering transmission or storage, because of its increased amount of data. Any decision must be taken in the light of the available bandwidth or storage capacity, quality and user expectations. Free viewpoint navigation also remains partly unsolved. The most pressing issue getting in the way of widespread uptake of consumer 3D systems is the ability to deliver 3D content to heterogeneous consumer displays over the heterogeneous networks. Optimising 3D video communication solutions must consider the entire pipeline, starting with optimisation at the video source to the end display and transmission optimisation. Multi-view offers the most compelling solution for 3D videos with motion parallax and freedom from wearing headgear for 3D video perception. Optimising multi-view video for delivery and display could increase the demand for true 3D in the consumer market. This thesis focuses on an end-to-end quality optimisation in 3D video communication/transmission, offering solutions for optimisation at the compression, transmission, and decoder levels.Brunel University - Isambard Research Scholarshi

Designing new network adaptation and ATM adaptation layers for interactive multimedia applications

Multimedia services, audiovisual applications composed of a combination of discrete and continuous data streams, will be a major part of the traffic flowing in the next generation of high speed networks. The cornerstones for multimedia are Asynchronous Transfer Mode (ATM) foreseen as the technology for the future Broadband Integrated Services Digital Network (B-ISDN) and audio and video compression algorithms such as MPEG-2 that reduce applications bandwidth requirements. Powerful desktop computers available today can integrate seamlessly the network access and the applications and thus bring the new multimedia services to home and business users. Among these services, those based on multipoint capabilities are expected to play a major role.    Interactive multimedia applications unlike traditional data transfer applications have stringent simultaneous requirements in terms of loss and delay jitter due to the nature of audiovisual information. In addition, such stream-based applications deliver data at a variable rate, in particular if a constant quality is required.    ATM, is able to integrate traffic of different nature within a single network creating interactions of different types that translate into delay jitter and loss. Traditional protocol layers do not have the appropriate mechanisms to provide the required network quality of service (QoS) for such interactive variable bit rate (VBR) multimedia multipoint applications. This lack of functionalities calls for the design of protocol layers with the appropriate functions to handle the stringent requirements of multimedia.    This thesis contributes to the solution of this problem by proposing new Network Adaptation and ATM Adaptation Layers for interactive VBR multimedia multipoint services.    The foundations to build these new multimedia protocol layers are twofold; the requirements of real-time multimedia applications and the nature of compressed audiovisual data.    On this basis, we present a set of design principles we consider as mandatory for a generic Multimedia AAL capable of handling interactive VBR multimedia applications in point-to-point as well as multicast environments. These design principles are then used as a foundation to derive a first set of functions for the MAAL, namely; cell loss detection via sequence numbering, packet delineation, dummy cell insertion and cell loss correction via RSE FEC techniques.    The proposed functions, partly based on some theoretical studies, are implemented and evaluated in a simulated environment. Performances are evaluated from the network point of view using classic metrics such as cell and packet loss. We also study the behavior of the cell loss process in order to evaluate the efficiency to be expected from the proposed cell loss correction method. We also discuss the difficulties to map network QoS parameters to user QoS parameters for multimedia applications and especially for video information. In order to present a complete performance evaluation that is also meaningful to the end-user, we make use of the MPQM metric to map the obtained network performance results to a user level. We evaluate the impact that cell loss has onto video and also the improvements achieved with the MAAL.    All performance results are compared to an equivalent implementation based on AAL5, as specified by the current ITU-T and ATM Forum standards.    An AAL has to be by definition generic. But to fully exploit the functionalities of the AAL layer, it is necessary to have a protocol layer that will efficiently interface the network and the applications. This role is devoted to the Network Adaptation Layer.    The network adaptation layer (NAL) we propose, aims at efficiently interface the applications to the underlying network to achieve a reliable but low overhead transmission of video streams. Since this requires an a priori knowledge of the information structure to be transmitted, we propose the NAL to be codec specific.    The NAL targets interactive multimedia applications. These applications share a set of common requirements independent of the encoding scheme used. This calls for the definition of a set of design principles that should be shared by any NAL even if the implementation of the functions themselves is codec specific. On the basis of the design principles, we derive the common functions that NALs have to perform which are mainly two; the segmentation and reassembly of data packets and the selective data protection.    On this basis, we develop an MPEG-2 specific NAL. It provides a perceptual syntactic information protection, the PSIP, which results in an intelligent and minimum overhead protection of video information. The PSIP takes advantage of the hierarchical organization of the compressed video data, common to the majority of the compression algorithms, to perform a selective data protection based on the perceptual relevance of the syntactic information.    The transmission over the combined NAL-MAAL layers shows significant improvement in terms of CLR and perceptual quality compared to equivalent transmissions over AAL5 with the same overhead.    The usage of the MPQM as a performance metric, which is one of the main contributions of this thesis, leads to a very interesting observation. The experimental results show that for unexpectedly high CLRs, the average perceptual quality remains close to the original value. The economical potential of such an observation is very important. Given that the data flows are VBR, it is possible to improve network utilization by means of statistical multiplexing. It is therefore possible to reduce the cost per communication by increasing the number of connections with a minimal loss in quality.    This conclusion could not have been derived without the combined usage of perceptual and network QoS metrics, which have been able to unveil the economic potential of perceptually protected streams.    The proposed concepts are finally tested in a real environment where a proof-of-concept implementation of the MAAL has shown a behavior close to the simulated results therefore validating the proposed multimedia protocol layers

Quality-Oriented Mobility Management for Multimedia Content Delivery to Mobile Users

The heterogeneous wireless networking environment determined by the latest developments in wireless access technologies promises a high level of communication resources for mobile computational devices. Although the communication resources provided, especially referring to bandwidth, enable multimedia streaming to mobile users, maintaining a high user perceived quality is still a challenging task. The main factors which affect quality in multimedia streaming over wireless networks are mainly the error-prone nature of the wireless channels and the user mobility. These factors determine a high level of dynamics of wireless communication resources, namely variations in throughput and packet loss as well as network availability and delays in delivering the data packets. Under these conditions maintaining a high level of quality, as perceived by the user, requires a quality oriented mobility management scheme. Consequently we propose the Smooth Adaptive Soft-Handover Algorithm, a novel quality oriented handover management scheme which unlike other similar solutions, smoothly transfer the data traffic from one network to another using multiple simultaneous connections. To estimate the capacity of each connection the novel Quality of Multimedia Streaming (QMS) metric is proposed. The QMS metric aims at offering maximum flexibility and efficiency allowing the applications to fine tune the behavior of the handover algorithm. The current simulation-based performance evaluation clearly shows the better performance of the proposed Smooth Adaptive Soft-Handover Algorithm as compared with other handover solutions. The evaluation was performed in various scenarios including multiple mobile hosts performing handover simultaneously, wireless networks with variable overlapping areas, and various network congestion levels

Mobile Ad-Hoc Networks

Being infrastructure-less and without central administration control, wireless ad-hoc networking is playing a more and more important role in extending the coverage of traditional wireless infrastructure (cellular networks, wireless LAN, etc). This book includes state-of-the-art techniques and solutions for wireless ad-hoc networks. It focuses on the following topics in ad-hoc networks: quality-of-service and video communication, routing protocol and cross-layer design. A few interesting problems about security and delay-tolerant networks are also discussed. This book is targeted to provide network engineers and researchers with design guidelines for large scale wireless ad hoc networks

Contribution to quality of user experience provision over wireless networks

The widespread expansion of wireless networks has brought new attractive possibilities to end users. In addition to the mobility capabilities provided by unwired devices, it is worth remarking the easy configuration process that a user has to follow to gain connectivity through a wireless network. Furthermore, the increasing bandwidth provided by the IEEE 802.11 family has made possible accessing to high-demanding services such as multimedia communications. Multimedia traffic has unique characteristics that make it greatly vulnerable against network impairments, such as packet losses, delay, or jitter. Voice over IP (VoIP) communications, video-conference, video-streaming, etc., are examples of these high-demanding services that need to meet very strict requirements in order to be served with acceptable levels of quality. Accomplishing these tough requirements will become extremely important during the next years, taking into account that consumer video traffic will be the predominant traffic in the Internet during the next years. In wired systems, these requirements are achieved by using Quality of Service (QoS) techniques, such as Differentiated Services (DiffServ), traffic engineering, etc. However, employing these methodologies in wireless networks is not that simple as many other factors impact on the quality of the provided service, e.g., fading, interferences, etc. Focusing on the IEEE 802.11g standard, which is the most extended technology for Wireless Local Area Networks (WLANs), it defines two different architecture schemes. On one hand, the infrastructure mode consists of a central point, which manages the network, assuming network controlling tasks such as IP assignment, routing, accessing security, etc. The rest of the nodes composing the network act as hosts, i.e., they send and receive traffic through the central point. On the other hand, the IEEE 802.11 ad-hoc configuration mode is less extended than the infrastructure one. Under this scheme, there is not a central point in the network, but all the nodes composing the network assume both host and router roles, which permits the quick deployment of a network without a pre-existent infrastructure. This type of networks, so called Mobile Ad-hoc NETworks (MANETs), presents interesting characteristics for situations when the fast deployment of a communication system is needed, e.g., tactics networks, disaster events, or temporary networks. The benefits provided by MANETs are varied, including high mobility possibilities provided to the nodes, network coverage extension, or network reliability avoiding single points of failure. The dynamic nature of these networks makes the nodes to react to topology changes as fast as possible. Moreover, as aforementioned, the transmission of multimedia traffic entails real-time constraints, necessary to provide these services with acceptable levels of quality. For those reasons, efficient routing protocols are needed, capable of providing enough reliability to the network and with the minimum impact to the quality of the service flowing through the nodes. Regarding quality measurements, the current trend is estimating what the end user actually perceives when consuming the service. This paradigm is called Quality of user Experience (QoE) and differs from the traditional Quality of Service (QoS) approach in the human perspective given to quality estimations. In order to measure the subjective opinion that a user has about a given service, different approaches can be taken. The most accurate methodology is performing subjective tests in which a panel of human testers rates the quality of the service under evaluation. This approach returns a quality score, so-called Mean Opinion Score (MOS), for the considered service in a scale 1 - 5. This methodology presents several drawbacks such as its high expenses and the impossibility of performing tests at real time. For those reasons, several mathematical models have been presented in order to provide an estimation of the QoE (MOS) reached by different multimedia services In this thesis, the focus is on evaluating and understanding the multimedia-content transmission-process in wireless networks from a QoE perspective. To this end, firstly, the QoE paradigm is explored aiming at understanding how to evaluate the quality of a given multimedia service. Then, the influence of the impairments introduced by the wireless transmission channel on the multimedia communications is analyzed. Besides, the functioning of different WLAN schemes in order to test their suitability to support highly demanding traffic such as the multimedia transmission is evaluated. Finally, as the main contribution of this thesis, new mechanisms or strategies to improve the quality of multimedia services distributed over IEEE 802.11 networks are presented. Concretely, the distribution of multimedia services over ad-hoc networks is deeply studied. Thus, a novel opportunistic routing protocol, so-called JOKER (auto-adJustable Opportunistic acK/timEr-based Routing) is presented. This proposal permits better support to multimedia services while reducing the energy consumption in comparison with the standard ad-hoc routing protocols.Universidad Politécnica de CartagenaPrograma Oficial de Doctorado en Tecnologías de la Información y Comunicacione