Improving latency tolerance of multithreading through decoupling

The increasing hardware complexity of dynamically scheduled superscalar processors may compromise the scalability of this organization to make an efficient use of future increases in transistor budget. SMT processors, designed over a superscalar core, are therefore directly concerned by this problem. The article presents and evaluates a novel processor microarchitecture which combines two paradigms: simultaneous multithreading and access/execute decoupling. Since its decoupled units issue instructions in order, this architecture is significantly less complex, in terms of critical path delays, than a centralized out-of-order design, and it is more effective for future growth in issue-width and clock speed. We investigate how both techniques complement each other. Since decoupling features an excellent memory latency hiding efficiency, the large amount of parallelism exploited by multithreading may be used to hide the latency of functional units and keep them fully utilized. The study shows that, by adding decoupling to a multithreaded architecture, fewer threads are needed to achieve maximum throughput. Therefore, in addition to the obvious hardware complexity reduction, it places lower demands on the memory system. The study also reveals that multithreading by itself exhibits little memory latency tolerance. Results suggest that most of the latency hiding effectiveness of SMT architectures comes from the dynamic scheduling. On the other hand, decoupling is very effective at hiding memory latency. An increase in the cache miss penalty from 1 to 32 cycles reduces the performance of a 4-context multithreaded decoupled processor by less than 2 percent. For the nondecoupled multithreaded processor, the loss of performance is about 23 percent.Peer ReviewedPostprint (published version

The synergy of multithreading and access/execute decoupling

This work presents and evaluates a novel processor microarchitecture which combines two paradigms: access/execute decoupling and simultaneous multithreading. We investigate how both techniques complement each other: while decoupling features an excellent memory latency hiding efficiency, multithreading supplies the in-order issue stage with enough ILP to hide the functional unit latencies. Its partitioned layout, together with its in-order issue policy makes it potentially less complex, in terms of critical path delays, than a centralized out-of-order design, to support future growths in issue-width and clock speed. The simulations show that by adding decoupling to a multithreaded architecture, its miss latency tolerance is sharply increased and in addition, it needs fewer threads to achieve maximum throughput, especially for a large miss latency. Fewer threads result in a hardware complexity reduction and lower demands on the memory system, which becomes a critical resource for large miss latencies, since bandwidth may become a bottleneck.Peer ReviewedPostprint (published version

Mitosis based speculative multithreaded architectures

In the last decade, industry made a right-hand turn and shifted towards multi-core processor designs, also known as Chip-Multi-Processors (CMPs), in order to provide further performance improvements under a reasonable power budget, design complexity, and validation cost. Over the years, several processor vendors have come out with multi-core chips in their product lines and they have become mainstream, with the number of cores increasing in each processor generation. Multi-core processors improve the performance of applications by exploiting Thread Level Parallelism (TLP) while the Instruction Level Parallelism (ILP) exploited by each individual core is limited. These architectures are very efficient when multiple threads are available for execution. However, single-thread sections of code (single-thread applications and serial sections of parallel applications) pose important constraints on the benefits achieved by parallel execution, as pointed out by Amdahl’s law. Parallel programming, even with the help of recently proposed techniques like transactional memory, has proven to be a very challenging task. On the other hand, automatically partitioning applications into threads may be a straightforward task in regular applications, but becomes much harder for irregular programs, where compilers usually fail to discover sufficient TLP. In this scenario, two main directions have been followed in the research community to take benefit of multi-core platforms: Speculative Multithreading (SpMT) and Non-Speculative Clustered architectures. The former splits a sequential application into speculative threads, while the later partitions the instructions among the cores based on data-dependences but avoid large degree of speculation. Despite the large amount of research on both these approaches, the proposed techniques so far have shown marginal performance improvements. In this thesis we propose novel schemes to speed-up sequential or lightly threaded applications in multi-core processors that effectively address the main unresolved challenges of previous approaches. In particular, we propose a SpMT architecture, called Mitosis, that leverages a powerful software value prediction technique to manage inter-thread dependences, based on pre-computation slices (p-slices). Thanks to the accuracy and low cost of this technique, Mitosis is able to effectively parallelize applications even in the presence of frequent dependences among threads. We also propose a novel architecture, called Anaphase, that combines the best of SpMT schemes and clustered architectures. Anaphase effectively exploits ILP, TLP and Memory Level Parallelism (MLP), thanks to its unique finegrain thread decomposition algorithm that adapts to the available parallelism in the application

Design and validation of a simultaneous multi-threaded DLX processor

technical reportModern day computer systems rely on two forms of parallelism to achieve high performance, parallelism between individual instructions of a program (ILP) and parallelism between individual threads (TLP). Superscalar processors exploit ILP by issuing several instructions per clock, and multiprocessors (MP) exploit TLP by running different threads in parallel on different processors. A fundamental imitation of these approaches to exploit parallelism is that processor resources are statically partitioned. If TLP is low, processors in a MP system will be idle, and if ILP is low, issue slots in a superscalar processor will be wasted. As a consequence, the hardware cannot adapt to changing levels of ILP and TLP and resource utilization tend to be low. Since resource utilization is low there is potential to achieve higher performance if somehow useful instructions could be found to fill up the wasted issue slots. This paper explores a method called simultaneous multithreading (SMT) that addresses the utilization problem by letting multiple threads compete for the resources of a single processor each clock cycle thus increasing the potential ILP available

Mitosis based speculative multithreaded architectures

In the last decade, industry made a right-hand turn and shifted towards multi-core processor designs, also known as Chip-Multi-Processors (CMPs), in order to provide further performance improvements under a reasonable power budget, design complexity, and validation cost. Over the years, several processor vendors have come out with multi-core chips in their product lines and they have become mainstream, with the number of cores increasing in each processor generation. Multi-core processors improve the performance of applications by exploiting Thread Level Parallelism (TLP) while the Instruction Level Parallelism (ILP) exploited by each individual core is limited. These architectures are very efficient when multiple threads are available for execution. However, single-thread sections of code (single-thread applications and serial sections of parallel applications) pose important constraints on the benefits achieved by parallel execution, as pointed out by Amdahl’s law. Parallel programming, even with the help of recently proposed techniques like transactional memory, has proven to be a very challenging task. On the other hand, automatically partitioning applications into threads may be a straightforward task in regular applications, but becomes much harder for irregular programs, where compilers usually fail to discover sufficient TLP. In this scenario, two main directions have been followed in the research community to take benefit of multi-core platforms: Speculative Multithreading (SpMT) and Non-Speculative Clustered architectures. The former splits a sequential application into speculative threads, while the later partitions the instructions among the cores based on data-dependences but avoid large degree of speculation. Despite the large amount of research on both these approaches, the proposed techniques so far have shown marginal performance improvements. In this thesis we propose novel schemes to speed-up sequential or lightly threaded applications in multi-core processors that effectively address the main unresolved challenges of previous approaches. In particular, we propose a SpMT architecture, called Mitosis, that leverages a powerful software value prediction technique to manage inter-thread dependences, based on pre-computation slices (p-slices). Thanks to the accuracy and low cost of this technique, Mitosis is able to effectively parallelize applications even in the presence of frequent dependences among threads. We also propose a novel architecture, called Anaphase, that combines the best of SpMT schemes and clustered architectures. Anaphase effectively exploits ILP, TLP and Memory Level Parallelism (MLP), thanks to its unique finegrain thread decomposition algorithm that adapts to the available parallelism in the application.Postprint (published version

Locality Enhancement and Dynamic Optimizations on Multi-Core and GPU

Enhancing the match between software executions and hardware features is key to computing efficiency. The match is a continuously evolving and challenging problem. This dissertation focuses on the development of programming system support for exploiting two key features of modern hardware development: the massive parallelism of emerging computational accelerators such as Graphic Processing Units (GPU), and the non-uniformity of cache sharing in modern multicore processors. They are respectively driven by the important role of accelerators in today\u27s general-purpose computing and the ultimate importance of memory performance. This dissertation particularly concentrates on optimizing control flows and memory references, at both compilation and execution time, to tap into the full potential of pure software solutions in taking advantage of the two key hardware features.;Conditional branches cause divergences in program control flows, which may result in serious performance degradation on massively data-parallel GPU architectures with Single Instruction Multiple Data (SIMD) parallelism. On such an architecture, control divergence may force computing units to stay idle for a substantial time, throttling system throughput by orders of magnitude. This dissertation provides an extensive exploration of the solution to this problem and presents program level transformations based upon two fundamental techniques --- thread relocation and data relocation. These two optimizations provide fundamental support for swapping jobs among threads so that the control flow paths of threads converge within every SIMD thread group.;In memory performance, this dissertation concentrates on two aspects: the influence of nonuniform sharing on multithreading applications, and the optimization of irregular memory references on GPUs. In shared cache multicore chips, interactions among threads are complicated due to the interplay of cache contention and synergistic prefetching. This dissertation presents the first systematic study on the influence of non-uniform shared cache on contemporary parallel programs, reveals the mismatch between the software development and underlying cache sharing hierarchies, and further demonstrates it by proposing and applying cache-sharing-aware data transformations that bring significant performance improvement. For the second aspect, the efficiency of GPU accelerators is sensitive to irregular memory references, which refer to the memory references whose access patterns remain unknown until execution time (e.g., A[P[i]]). The root causes of the irregular memory reference problem are similar to that of the control flow problem, while in a more general and complex form. I developed a framework, named G-Streamline, as a unified software solution to dynamic irregularities in GPU computing. It treats both types of irregularities at the same time in a holistic fashion, maximizing the whole-program performance by resolving conflicts among optimizations