Validation of ash/dust detections from SEVIRI data using ACTRIS/EARLINET ground-based LIDAR measurements

Twotailored configurations of the Robust Satellite Technique (RST) multi-temporal approach, for airborne volcanic ash and desert dust detection, have been tested in the framework of the European Natural Airborne Disaster Information and Coordination System for Aviation (EUNADICS-AV) project. The two algorithms, running on Spinning Enhanced Visible Infra-Red Imager (SEVIRI) data, were previously assessed over wide areas by comparison with independent satellite-based aerosol products. In this study, we present results of a first validation analysis of the above mentioned satellite-based ash/dust products using independent, ground-based observations coming from the European Aerosol Research Lidar Network (EARLINET). The aim is to assess the capabilities of RST-based ash/dust products in providing useful information even at local scale and to verify their applicability as a "trigger" to timely activate EARLINET measurements during airborne hazards. The intense Saharan dust event of May 18-23 2008-which affected both the Mediterranean Basin and Continental Europe-and the strong explosive eruptions of Eyjafjallajökull (Iceland) volcano of April-May 2010, were analyzed as test cases. Our results show that both RST-based algorithms were capable of providing reliable information about the investigated phenomena at specific sites of interest, successfully detecting airborne ash/dust in different geographic regions using both nighttime and daytime SEVIRI data. However, the validation analysis also demonstrates that ash/dust layers remain undetected by satellite in the presence of overlying meteorological clouds and when they are tenuous (i.e., with an integrated backscatter coefficient less than ~0.001 sr-1 and with aerosol backscatter coefficient less than ~1 × 10-6 m-1sr-1). This preliminary analysis confirms that the continuity of satellite-based observations can be used to timely "trigger" ground-based LIDAR measurements in case of airborne hazard events. Finally, this work confirms that advanced satellite-based detection schemes may provide a relevant contribution to the monitoring of ash/dust phenomena and that the synergistic use of (satellite-based) large scale, continuous and timely records with (ground-based) accurate and quantitative measurements may represent an added value, especially in operational scenarios

Monitoring the Agung (Indonesia) ash plume of November 2017 by means of infrared Himawari 8 data

The Agung volcano (Bali; Indonesia) erupted in later November 2017 after several years of quiescence. Because of ash emissions, hundreds of flights were cancelled, causing an important air traffic disruption in Indonesia. We investigate those ash emissions from space by applying the RSTASH algorithm for the first time to Himawari-8 data and using an ad hoc implementation scheme to reduce the time of the elaboration processes. Himawari-8 is a new generation Japanese geostationary meteorological satellite, whose AHI (Advanced Himawari Imager) sensor offers improved features, in terms of spectral, spatial and temporal resolution, in comparison with the previous imagers of the MTSAT (Multi-Functional Transport Satellite) series. Those features should guarantee further improvements in monitoring rapidly evolving weather/environmental phenomena. Results of this work show that RSTASH was capable of successfully detecting and tracking the Agung ash plume, despite some limitations (e.g., underestimation of ash coverage under certain conditions; generation of residual artefacts). Moreover, estimates of ash cloud-top height indicate that the monitored plume extended up to an altitude of about 9.3 km above sea level during the period 25 November at 21:10 UTC-26 November at 00:50 UTC. The study demonstrates that RSTASH may give a useful contribution for the operational monitoring of ash clouds over East Asia and the Western Pacific region, well exploiting the 10 min temporal resolution and the spectral features of the Himawari-8 data

Working with the enemy? Social work education and men who use intimate partner violence

This article examines service user involvement in social work education. It discusses the challenges and ethical considerations of involving populations who may previously have been excluded from user involvement initiatives, raising questions about the benefits and challenges of their involvement. The article then provides discussion of an approach to service user involvement in social work education with one of these populations, men who use violence in their intimate relationships, and concludes by considering the implications of their involvement for the social work academy

Tropospheric and ionospheric anomalies induced by volcanic and saharan dust events as part of geosphere interaction phenomena

In this work, we assessed the possible relation of ionospheric perturbations observed by Detection of Electro-Magnetic Emissions Transmitted from Earthquake Regions (DEMETER), Global Positioning System total electron content (GPS TEC), National Oceanic and Atmospheric Administration (NOAA)-derived outgoing longwave-Earth radiation (OLR), and atmospheric chemical potential (ACP) measurements, with volcanic and Saharan dust events identified by ground and satellite-based medium infrared/thermal infrared (MIR/TIR) observations. The results indicated that the Mt. Etna (Italy) volcanic activity of 2006 was probably responsible for the ionospheric perturbations revealed by DEMETER on 4 November and 6 December and by GPS TEC observations on 4 November and 12 December. This activity also affected the OLR (on 26 October; 6 and 23 November; and 2, 6, and 14 December) and ACP (on 31 October-1 November) analyses. Similarly, two massive Saharan dust episodes, detected by Robust Satellite Techniques (RST) using Spinning Enhanced Visible and Infrared Imager (SEVIRI) optical data, probably caused the ionospheric anomalies recorded, based on DEMETER and GPS TEC observations, over the Mediterranean basin in May 2008. The study confirmed the perturbing effects of volcanic and dust events on tropospheric and ionospheric parameters. Further, it demonstrated the advantages of using independent satellite observations to investigate atmospheric phenomena, which may not always be well documented. The impact of this increased detection capacity in reducing false positives, in the framework of a short-term seismic hazard forecast based on the study of ionospheric and tropospheric anomalies, is also addressed

Determining ground-level composition and concentration of particulate matter across regional areas using the Himawari-8 satellite

Speciated ground-level aerosol concentrations are required to understand and mitigate health impacts from dust storms, wildfires and other aerosol emissions. Globally, surface monitoring is limited due to cost and infrastructure demands. While remote sensing can help estimate respirable (i.e. ground level) concentrations, current observations are restricted by inadequate spatiotemporal resolution, uncertainty in aerosol type, particle size, and vertical profile. One key issue with current remote sensing datasets is that they are derived from reflectances observed by polar orbiting imagers, which means that aerosol is only derived during the daytime, and only once or twice per day. Sub-hourly, infrared (IR), geostationary data, such as the ten-minute data from Himawari-8, are required to monitor these events to ensure that sporadic dust events can be continually observed and quantified. Newer quantification methods using geostationary data have focussed on detecting the presence, or absence, of a dust event. However, limited attention has been paid to the determination of composition, and particle size, using IR wavelengths exclusively. More appropriate IR methods are required to quantify and classify aerosol composition in order to improve the understanding of source impacts. The primary research objectives were investigated through a series of scientific papers centred on aspects deemed critical to successfully determining ground-level concentrations. A literature review of surface particulate monitoring of dust events using geostationary satellite remote sensing was undertaken to understand the theory and limitations in the current methodology. The review identified (amongst other findings) the reliance on visible wavelengths and the lack of temporal resolution in polar-orbiting satellite data. As a result of this, a duststorm was investigated to determine how rapidly the storm passed and what temporal data resolution is required to monitor these and other similar events. Various IR dust indices were investigated to determine which are optimum for determining spectral change. These indices were then used to qualify and quantitate dust events, and the methodology was validated against three severe air quality events of a dust storm; smoke from prescribed burns; and an ozone smog incident. The study identified that continuous geostationary temporal resolution is critical in the determination of concentration. The Himawari-8 spatial resolution of 2 km is slightly coarse and further spatial aggregation or cloud masking would be detrimental to determining concentrations. Five dual-band BTD combinations, using all IR wavelengths, maximises the identification of compositional differences, atmospheric stability, and cloud cover and this improves the estimated accuracy. Preliminary validation suggests that atmospheric stability, cloud height, relative humidity, PM2.5, PM10, NO, NO2, and O3 appear to produce plausible plumes but that aerosol speciation (soil, sea-spray, fires, vehicles, and secondary sulfates) and SO2 require further investigation. The research described in the thesis details the processes adopted for the development and implementation of an integrated approach to using geostationary remote sensing data to quantify population exposure (who), qualify the concentration and composition (what), assess the temporal (when) and spatial (where) concentration distributions, to determine the source (why) of aerosols contribution to resulting ground-level concentration

Volcanic ash detection and retrievals using MODIS data by means of neural networks

Volcanic ash clouds detection and retrieval represent a key issue for aviation safety due to the harming effects on aircraft. A lesson learned from the recent Eyjafjallajokull eruption is the need to obtain accurate and reliable retrievals on a real time basis. <br><br> In this work we have developed a fast and accurate Neural Network (NN) approach to detect and retrieve volcanic ash cloud properties from the Moderate Resolution Imaging Spectroradiometer (MODIS) data in the Thermal InfraRed (TIR) spectral range. Some measurements collected during the 2001, 2002 and 2006 Mt. Etna volcano eruptions have been considered as test cases. <br><br> The ash detection and retrievals obtained from the Brightness Temperature Difference (BTD) algorithm are used as training for the NN procedure that consists in two separate steps: ash detection and ash mass retrieval. The ash detection is reduced to a classification problem by identifying two classes: "ashy" and "non-ashy" pixels in the MODIS images. Then the ash mass is estimated by means of the NN, replicating the BTD-based model performances. A segmentation procedure has also been tested to remove the false ash pixels detection induced by the presence of high meteorological clouds. The segmentation procedure shows a clear advantage in terms of classification accuracy: the main drawback is the loss of information on ash clouds distal part. <br><br> The results obtained are very encouraging; indeed the ash detection accuracy is greater than 90%, while a mean RMSE equal to 0.365 t km<sup>−2</sup> has been obtained for the ash mass retrieval. Moreover, the NN quickness in results delivering makes the procedure extremely attractive in all the cases when the rapid response time of the system is a mandatory requirement

Remote sensing of atmospheric aerosol distributions using supervised texture classification

This thesis presents a new technique to identify a 2D mask showing the extent of particulate aerosol distributions in satellite imagery. This technique uses a supervised texture classication approach, and utilises data from two distinct satellite sources. The vertical feature mask (VFM) product from the CALIPSO lidar, provides an accurate description of the aerosol content of the atmosphere but has a limited footprint and coverage. The CALIPSO VFM is used to provide training data in order to for classiers to be applied to other imagery, namely data from the spinning enhanced visible and infrared imager (SEVIRI) on the MSG satellite. The output from the classication is a 2D mask representing the locations of the particulate aerosol of interest within the SEVIRI image. This approach has been demonstrated on test cases over land and ocean, and shows a good agreement with other techniques for the detection of particulate aerosol. However, the supervised texture approach provides outputs at a higher resolution than the existing methods and the same approach is applicable over land and ocean and therefore shows the advantages compared to the current techniques. Furthermore, the coverage of the approach can be further extended using signature extension and chain classication. Signature extension was applied to one of the test cases to monitor the same geographical region with temporal extension away from the initial supervised classication. The experiments showed that it was possible to extend the coverage for ±90 minutes from the original classication and indicates the possibility of greater extension over larger temporal windows.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Observability of Sudden Aerosol Injections by Ensemble-Based Four-Dimensional Assimilation of Remote Sensing Data

For sudden aerosol injections, uncertainties of emission source parameters impose the characterizing impediment for skillful numerical simulations. Large amounts of accidentally emitted aerosols can infer serious impacts on health, climate, environment, and economy. This highlights the societal need for reliable forecasts of released particles. Spatiotemporal assimilation techniques combine atmospheric dynamics as knowledge provided by the model with observations and induce constraints with potentially advantageous effects on the simulations. Ensemble-based analyses provide valuable information about the skill of forecast results. However, predictions remain uncertain in regions, where observational information is restricted. Observability investigates the impact of utilized observations, thus focusing on observation network optimization and information quantity specification. Taking volcanic eruptions as prototype for sudden aerosol injections, the research described in this thesis develops new methodologies to assess the impact of observations on the analysis. The emphasis is placed on assimilation-based analyses applying initial value and emission factor optimization for volcanic ash dispersion predictions of the Eyjafjallajökull eruption in April 2010. As observational input, two satellite-borne remote sensing principles are exploited: SEVIRI volcanic ash column mass loadings and CALIOP particle extinction coefficient profiles. For the assimilation within EURAD-IM, appropriate observation operators and their adjoints are constructed. The theoretical principles of observability in case of volcanic ash column mass loading observations are deduced from the viewpoint of the Kolmogorov-Sinai entropy. Ensemble versions of the 4D-var data assimilation technique and the particle smoother approach are implemented and processed, able to identify regions of high and low uncertainty in the dispersion simulation results. The analyses reveal a considerable constraining impact of SEVIRI retrievals to the ash dispersion, while CALIOP retrievals append information only on a very local scale. The variable degree of reliability is shown as a consequence of cloud cover dependent observability from space for both quasi-continuous SEVIRI data and sparse CALIOP overpasses

Atmospheric remote sensing and radiopropagation: from numerical modeling to spaceborne and terrestrial applications

The remote sensing of electromagnetic wave properties is probably the most viable and fascinating way to observe and study physical media, comprising our planet and its atmosphere, at the same time ensuring a proper continuity in the observations. Applications are manifold and the scientific community has been importantly studying and investing on new technologies, which would let us widen our knowledge of what surrounds us. This thesis aims at showing some novel techniques and corresponding applications in the field of the atmospheric remote sensing and radio-propagation, at both microwave and optical wavelengths. The novel Sun-tracking microwave radiometry technique is shown. The antenna noise temperature of a ground-based microwave radiometer is measured by alternately pointing toward-the-Sun and off-the-Sun while tracking it along its diurnal ecliptic. During clear sky the brightness temperature of the Sun disk emission at K and Ka frequency bands and in the under-explored millimeter-wave V and W bands can be estimated by adopting different techniques. Parametric prediction models for retrieving all-weather atmospheric extinction from ground-based microwave radiometers are tested and their accuracy evaluated. Moreover, a characterization of suspended clouds in terms of atmospheric path attenuation is presented, by exploiting a stochastic approach used to model the time evolution of the cloud contribution. A model chain for the prediction of the tropospheric channel for the downlink of interplanetary missions operating above Ku band is proposed. On top of a detailed description of the approach, the chapter presents the validation results and examples of the model-chain online operation. Online operation has already been tested within a feasibility study applied to the BepiColombo mission to Mercury operated by the European Space Agency (ESA) and by exploiting the Hayabusa-2 mission Ka-band data by the Japan Aerospace Exploration Agency (JAXA), thanks to the ESA cross-support service. A preliminary (and successful) validation of the model-chain has been carried out by comparing the simulated signal-to-noise ratio with the one received from Hayabusa-2. At the next ITU World Radiocommunication Conference 2019, Agenda Item 1.13 will address the identification and the possible additional allocation of radio-frequency spectrum to serve the future development of systems supporting the fifth generation of cellular mobile communications (5G). The potential impact of International Mobile Telecommunications (IMT) deployments is shown in terms of received radio frequency interference by ESA’s telecommunication links. Received interference can derive from several radio-propagation mechanisms, which strongly depend on atmospheric conditions, radio frequency, link availability, distance and path topography; at any time a single mechanism, or more than one may be present. Results are shown in terms of required separation distances, i.e. the minimum distance between the earth station and the IMT station ensuring that the protection criteria for the earth station are met