Ithemal: Accurate, Portable and Fast Basic Block Throughput Estimation using Deep Neural Networks

Predicting the number of clock cycles a processor takes to execute a block of assembly instructions in steady state (the throughput) is important for both compiler designers and performance engineers. Building an analytical model to do so is especially complicated in modern x86-64 Complex Instruction Set Computer (CISC) machines with sophisticated processor microarchitectures in that it is tedious, error prone, and must be performed from scratch for each processor generation. In this paper we present Ithemal, the first tool which learns to predict the throughput of a set of instructions. Ithemal uses a hierarchical LSTM--based approach to predict throughput based on the opcodes and operands of instructions in a basic block. We show that Ithemal is more accurate than state-of-the-art hand-written tools currently used in compiler backends and static machine code analyzers. In particular, our model has less than half the error of state-of-the-art analytical models (LLVM's llvm-mca and Intel's IACA). Ithemal is also able to predict these throughput values just as fast as the aforementioned tools, and is easily ported across a variety of processor microarchitectures with minimal developer effort.Comment: Published at 36th International Conference on Machine Learning (ICML) 201

Vector support for multicore processors with major emphasis on configurable multiprocessors

It recently became increasingly difficult to build higher speed uniprocessor chips because of performance degradation and high power consumption. The quadratically increasing circuit complexity forbade the exploration of more instruction-level parallelism (JLP). To continue raising the performance, processor designers then focused on thread-level parallelism (TLP) to realize a new architecture design paradigm. Multicore processor design is the result of this trend. It has proven quite capable in performance increase and provides new opportunities in power management and system scalability. But current multicore processors do not provide powerful vector architecture support which could yield significant speedups for array operations while maintaining arealpower efficiency. This dissertation proposes and presents the realization of an FPGA-based prototype of a multicore architecture with a shared vector unit (MCwSV). FPGA stands for Filed-Programmable Gate Array. The idea is that rather than improving only scalar or TLP performance, some hardware budget could be used to realize a vector unit to greatly speedup applications abundant in data-level parallelism (DLP). To be realistic, limited by the parallelism in the application itself and by the compiler\u27s vectorizing abilities, most of the general-purpose programs can only be partially vectorized. Thus, for efficient resource usage, one vector unit should be shared by several scalar processors. This approach could also keep the overall budget within acceptable limits. We suggest that this type of vector-unit sharing be established in future multicore chips. The design, implementation and evaluation of an MCwSV system with two scalar processors and a shared vector unit are presented for FPGA prototyping. The MicroBlaze processor, which is a commercial IP (Intellectual Property) core from Xilinx, is used as the scalar processor; in the experiments the vector unit is connected to a pair of MicroBlaze processors through standard bus interfaces. The overall system is organized in a decoupled and multi-banked structure. This organization provides substantial system scalability and better vector performance. For a given area budget, benchmarks from several areas show that the MCwSV system can provide significant performance increase as compared to a multicore system without a vector unit. However, a MCwSV system with two MicroBlazes and a shared vector unit is not always an optimized system configuration for various applications with different percentages of vectorization. On the other hand, the MCwSV framework was designed for easy scalability to potentially incorporate various numbers of scalar/vector units and various function units. Also, the flexibility inherent to FPGAs can aid the task of matching target applications. These benefits can be taken into account to create optimized MCwSV systems for various applications. So the work eventually focused on building an architecture design framework incorporating performance and resource management for application-specific MCwSV (AS-MCwSV) systems. For embedded system design, resource usage, power consumption and execution latency are three metrics to be used in design tradeoffs. The product of these metrics is used here to choose the MCwSV system with the smallest value

Performance analysis of a hardware accelerator of dependence management for taskbased dataflow programming models

Along with the popularity of multicore and manycore, task-based dataflow programming models obtain great attention for being able to extract high parallelism from applications without exposing the complexity to programmers. One of these pioneers is the OpenMP Superscalar (OmpSs). By implementing dynamic task dependence analysis, dataflow scheduling and out-of-order execution in runtime, OmpSs achieves high performance using coarse and medium granularity tasks. In theory, for the same application, the more parallel tasks can be exposed, the higher possible speedup can be achieved. Yet this factor is limited by task granularity, up to a point where the runtime overhead outweighs the performance increase and slows down the application. To overcome this handicap, Picos was proposed to support task-based dataflow programming models like OmpSs as a fast hardware accelerator for fine-grained task and dependence management, and a simulator was developed to perform design space exploration. This paper presents the very first functional hardware prototype inspired by Picos. An embedded system based on a Zynq 7000 All-Programmable SoC is developed to study its capabilities and possible bottlenecks. Initial scalability and hardware consumption studies of different Picos designs are performed to find the one with the highest performance and lowest hardware cost. A further thorough performance study is employed on both the prototype with the most balanced configuration and the OmpSs software-only alternative. Results show that our OmpSs runtime hardware support significantly outperforms the software-only implementation currently available in the runtime system for finegrained tasks.This work is supported by the Spanish Government through Programa Severo Ochoa (SEV-2015-0493), by the Spanish Ministry of Science and Technology through TIN2015-65316-P project, by the Generalitat de Catalunya (contracts 2014-SGR-1051 and 2014-SGR-1272) and by the European Research Council RoMoL Grant Agreement number 321253. We also thank the Xilinx University Program for its hardware and software donations.Peer ReviewedPostprint (published version

Energy-aware embedded media processing: customizable memory subsystems and energy management policies

textThe design of energy-efficient data memory architectures for embedded system platforms has received considerable attention in recent years. In this dissertation we propose a special-purpose data memory subsystem, called Xtream-Fit, targeted to streaming media applications executing on both generic uniprocessor embedded platforms and powerful SMT-based multi-threading platforms. We empirically demonstrate that Xtream-Fit achieves high energydelay efficiency across a wide range of media devices, from systems running a single media application to systems concurrently executing multiple media applications under synchronization constraints. Xtream-Fit’s energy efficiency is predicated on a novel task-based execution model that exposes/enhances opportunities for efficient prefetching, and aggressive dynamic energy conservation techniques targeting on-chip and off-chip memory components. A key novelty of Xtream-Fit is that it exposes a single customization parameter, thus enabling a very simple and yet effective design space exploration methodology to find the best memory configuration for the target application(s). Extensive experimental results show that Xtream-Fit reduces energy-delay product substantially – by 32% to 69% – as compared to ‘standard’ general-purpose memory subsystems enhanced with state of the art cache decay and SDRAM power mode control policies.Electrical and Computer Engineerin

MOWER : A NEW DESIGN FOR NON-BLOCKING MISPREDICTION RECOVERY

Mower is a micro-architecture technique which targets branch misprediction penalties in superscalar processors. It speeds-up the misprediction recovery process by dynamically evicting stale instructions and fixing the RAT (Register Alias Table) using explicit branch dependency tracking. Tracking branch dependencies is accomplished by using simple bit matrices. This low-overhead technique allows overlapping of the recovery process with instruction fetching, renaming and scheduling from the correct path. Our evaluation of the mechanism indicates that it yields performance very close to ideal recovery and provides up to 5% speed-up and 2% reduction in power consumption compared to a traditional recovery mechanism using a reorder buffer and a walker. The simplicity of the mechanism should permit easy implementation of Mower in an actual processor

ANALYTICAL MODEL FOR CHIP MULTIPROCESSOR MEMORY HIERARCHY DESIGN AND MAMAGEMENT

Continued advances in circuit integration technology has ushered in the era of chip multiprocessor (CMP) architectures as further scaling of the performance of conventional wide-issue superscalar processor architectures remains hard and costly. CMP architectures take advantageof Moore¡¯s Law by integrating more cores in a given chip area rather than a single fastyet larger core. They achieve higher performance with multithreaded workloads. However,CMP architectures pose many new memory hierarchy design and management problems thatmust be addressed. For example, how many cores and how much cache capacity must weintegrate in a single chip to obtain the best throughput possible? Which is more effective,allocating more cache capacity or memory bandwidth to a program?This thesis research develops simple yet powerful analytical models to study two newmemory hierarchy design and resource management problems for CMPs. First, we considerthe chip area allocation problem to maximize the chip throughput. Our model focuses onthe trade-off between the number of cores, cache capacity, and cache management strategies.We find that different cache management schemes demand different area allocation to coresand cache to achieve their maximum performance. Second, we analyze the effect of cachecapacity partitioning on the bandwidth requirement of a given program. Furthermore, ourmodel considers how bandwidth allocation to different co-scheduled programs will affect theindividual programs¡¯ performance. Since the CMP design space is large and simulating only one design point of the designspace under various workloads would be extremely time-consuming, the conventionalsimulation-based research approach quickly becomes ineffective. We anticipate that ouranalytical models will provide practical tools to CMP designers and correctly guide theirdesign efforts at an early design stage. Furthermore, our models will allow them to betterunderstand potentially complex interactions among key design parameters

Mitigating the Effect of Misspeculations in Superscalar Processors

Modern superscalar processors highly rely on the speculative execution which speculatively executes instructions and then verifies. If the prediction is different from the execution result, a misspeculation recovery is performed. Misspeculation recovery penalties still account for a substantial amount of performance reduction. This work focuses on the techniques to mitigate the effect of recovery penalties and proposes practical mechanisms which are thoroughly implemented and analyzed. In general, we can divide the misspeculation penalty into four parts: misspeculation detection delay; stale instruction elimination delay; state restoration delay and pipeline fill delay. This dissertation does not consider the detection delay, instead, we design four innovative mechanisms. Some of these mechanisms target a specific recovery delay whereas others target multiple types of delay in a unified algorithm. Mower was designed to address the stale instruction elimination delay and the state restoration delay by using a special walker. When a misprediction is detected, the walker will scan and repair the instructions which are younger than the mispredicted instruction. During the walking procedure, the correct state is restored and the stale instructions are eliminated. Based on Mower, we further simplify the design and develop a Two-Phase recovery mechanism. This mechanism uses only a basic recovery mechanism except for the case in which the retire stage was stalled by a long latency instruction. When the retire stage is stalled, the second phase is launched and the instructions in the pipeline are re-fetched. Two-Phase mechanism recovers from an earlier point in the program and overlaps the recovery penalty with the long latency penalty. In reality, some of the instructions on the wrong path can be reused during the recovery. However, such reuse of misprediction results is not easy and most of the time involves significant complexity. We design Passing Loop to reduce the pipeline fill delay. We applied our mechanism only for short forward branches which eliminates a substantial amount of complexity. In terms of memory dependence speculation and associated delays due to memory ordering violations, we develop a mechanism that optimizes store-queue-free architectures. A store-queue-free architecture experiences more memory dependence mispredictions due to its aggressive approach to speculations. A common solution is to delay the execution of an instruction which is more likely to be mispredicted. We propose a mechanism to dynamically insert predicates for comparing the address of memory instructions, which is called “Dynamic Memory Dependence Predication” (DMDP). This mechanism boosts the instruction execution to its earliest point and reduces the number of mispredictions

Parallel architectures and runtime systems co-design for task-based programming models

The increasing parallelism levels in modern computing systems has extolled the need for a holistic vision when designing multiprocessor architectures taking in account the needs of the programming models and applications. Nowadays, system design consists of several layers on top of each other from the architecture up to the application software. Although this design allows to do a separation of concerns where it is possible to independently change layers due to a well-known interface between them, it is hampering future systems design as the Law of Moore reaches to an end. Current performance improvements on computer architecture are driven by the shrinkage of the transistor channel width, allowing faster and more power efficient chips to be made. However, technology is reaching physical limitations were the transistor size will not be able to be reduced furthermore and requires a change of paradigm in systems design. This thesis proposes to break this layered design, and advocates for a system where the architecture and the programming model runtime system are able to exchange information towards a common goal, improve performance and reduce power consumption. By making the architecture aware of runtime information such as a Task Dependency Graph (TDG) in the case of dataflow task-based programming models, it is possible to improve power consumption by exploiting the critical path of the graph. Moreover, the architecture can provide hardware support to create such a graph in order to reduce the runtime overheads and making possible the execution of fine-grained tasks to increase the available parallelism. Finally, the current status of inter-node communication primitives can be exposed to the runtime system in order to perform a more efficient communication scheduling, and also creates new opportunities of computation and communication overlap that were not possible before. An evaluation of the proposals introduced in this thesis is provided and a methodology to simulate and characterize the application behavior is also presented.El aumento del paralelismo proporcionado por los sistemas de cómputo modernos ha provocado la necesidad de una visión holística en el diseño de arquitecturas multiprocesador que tome en cuenta las necesidades de los modelos de programación y las aplicaciones. Hoy en día el diseño de los computadores consiste en diferentes capas de abstracción con una interfaz bien definida entre ellas. Las limitaciones de esta aproximación junto con el fin de la ley de Moore limitan el potencial de los futuros computadores. La mayoría de las mejoras actuales en el diseño de los computadores provienen fundamentalmente de la reducción del tamaño del canal del transistor, lo cual permite chips más rápidos y con un consumo eficiente sin apenas cambios fundamentales en el diseño de la arquitectura. Sin embargo, la tecnología actual está alcanzando limitaciones físicas donde no será posible reducir el tamaño de los transistores motivando así un cambio de paradigma en la construcción de los computadores. Esta tesis propone romper este diseño en capas y abogar por un sistema donde la arquitectura y el sistema de tiempo de ejecución del modelo de programación sean capaces de intercambiar información para alcanzar una meta común: La mejora del rendimiento y la reducción del consumo energético. Haciendo que la arquitectura sea consciente de la información disponible en el modelo de programación, como puede ser el grafo de dependencias entre tareas en los modelos de programación dataflow, es posible reducir el consumo energético explotando el camino critico del grafo. Además, la arquitectura puede proveer de soporte hardware para crear este grafo con el objetivo de reducir el overhead de construir este grado cuando la granularidad de las tareas es demasiado fina. Finalmente, el estado de las comunicaciones entre nodos puede ser expuesto al sistema de tiempo de ejecución para realizar una mejor planificación de las comunicaciones y creando nuevas oportunidades de solapamiento entre cómputo y comunicación que no eran posibles anteriormente. Esta tesis aporta una evaluación de todas estas propuestas, así como una metodología para simular y caracterizar el comportamiento de las aplicacionesPostprint (published version