Tropospheric phase delay in interferometric synthetic aperture radar estimated from meteorological model and multispectral imagery

ENVISAT Medium Resolution Imaging Spectrometer Instrument (MERIS) multispectral data and the mesoscale meteorological model MM5 are used to estimate the tropospheric phase delay in synthetic aperture radar (SAR) interferograms. MERIS images acquired simultaneously with ENVISAT Advanced Synthetic Aperture Radar data provide an estimate of the total water vapor content W limited to cloud-free areas based on spectral bands ratio (accuracy 0.17 g cm^(−2) and ground resolution 300 m). Maps of atmospheric delay, 2 km in ground resolution, are simulated from MM5. A priori pertinent cumulus parameterization and planetary boundary layer options of MM5 yield near-equal phase correction efficiency. Atmospheric delay derived from MM5 is merged with available MERIS W product. Estimates of W measured from MERIS and modeled from MM5 are shown to be consistent and unbiased and differ by ~0.2 g cm^(−2) (RMS). We test the approach on data over the Lebanese ranges where active tectonics might contribute to a measurable SAR signal that is obscured by atmospheric effects. Local low-amplitude (1 rad) atmospheric oscillations with a 2.25 km wavelength on the interferograms are recovered from MERIS with an accuracy of 0.44 rad or 0.03 g cm^(−2). MERIS water product overestimates W in the clouds shadow due to mismodeling of multiple scattering and underestimates W on pixels with undetected semitransparent clouds. The proposed atmospheric filter models dynamic atmospheric signal which cannot be recovered by previous filtering techniques which are based on a static atmospheric correction. Analysis of filter efficiency with spatial wavelength shows that ~43% of the atmospheric signal is removed at all wavelengths

InSAR Coherence and Intensity Changes Detection

This research aims at differentiating human-induced effects over the landscape from the natural ones by exploiting a combination of amplitude and phase changes in satellite radar images. At a first step, ERS and Envisat data stacks are processed using COS software developed by the company SARMAP. Various features related to amplitude and phase as well as to their changes are then extracted from images of the same sensor. Combinations of the features extracted from one image, from several images of one sensor as well as from different sensors are performed to derive robust indicators of potential human-related changes. Finally, possibilities of exploiting and integrating other types of information sources such as various reports, maps, historical or agricultural data, etc. in the combination process are analyzed to improve the obtained results. The outcomes are used to evaluate the potential of this method applied to Sentinel-1 images

Ground deformation monitoring over Xinjiang coal fire area by an adaptive ERA5-corrected stacking-InSAR method

Underground coal fire is a global geological disaster that causes the loss of resources as well as environmental pollution. Xinjiang, China, is one of the regions suffering from serious underground coal fires. The accurate monitoring of underground coal fires is critical for management and extinguishment, and many remote sensing-based approaches have been developed for monitoring over large areas. Among them, the multi-temporal interferometric synthetic aperture radar (MT-InSAR) techniques have been recently employed for underground coal fires-related ground deformation monitoring. However, MT-InSAR involves a relatively high computational cost, especially when the monitoring area is large. We propose to use a more cost-efficient Stacking-InSAR technique to monitor ground deformation over underground coal fire areas in this study. Considering the effects of atmosphere on Stacking-InSAR, an ERA5 data-based estimation model is employed to mitigate the atmospheric phase of interferograms before stacking. Thus, an adaptive ERA5-Corrected Stacking-InSAR method is proposed in this study, and it is tested over the Fukang coal fire area in Xinjiang, China. Based on original and corrected interferograms, four groups of ground deformation results were obtained, and the possible coal fire areas were identified. In this paper, the ERA5 atmospheric delay products based on the estimation model along the LOS direction (D-LOS) effectively mitigate the atmospheric phase. The accuracy of ground deformation monitoring over a coal fire area has been improved by the proposed method choosing interferograms adaptively for stacking. The proposed Adaptive ERA5-Corrected Stacking-InSAR method can be used for efficient ground deformation monitoring over large coal fire areas.This research was supported in part by the National Natural Science Foundation of China (Grant No.41874044 and Grant No. 42004011), in part by project G2HOTSPOTS (PID2021-122142OB- I00) from the MCIN /AEI /10.13039 /501100011033 /FEDER, UE and in part by China Postdoctoral Science Foundation (Grant No. 2020M671646). At the same time, the research was also funded by the Construction Program of Space-Air-Ground-Well Cooperative Awareness Spatial Information Project (B20046) and National Key R&D Program of China (Grant No. 2022YFE0102600).Peer ReviewedPostprint (published version

The Sentinel-1 mission for the improvement of the scientific understanding and the operational monitoring of the seismic cycle

We describe the state of the art of scientific research on the earthquake cycle based on the analysis of Synthetic Aperture Radar (SAR) data acquired from satellite platforms. We examine the achievements and the main limitations of present SAR systems for the measurement and analysis of crustal deformation, and envision the foreseeable advances that the Sentinel-1 data will generate in the fields of geophysics and tectonics. We also review the technological and scientific issues which have limited so far the operational use of satellite data in seismic hazard assessment and crisis management, and show the improvements expected from Sentinel-1 dat

On the use of COSMO/SkyMed data and Weather Models for interferometric DEM generation

AbstractThis work experiments the potentialities of COSMO/SkyMed (CSK) data in providing interferometric Digital Elevation Model (DEM). We processed a stack of CSK data for measuring with meter accuracy the ground elevation on the available coherent targets, and used these values to check the accuracy of DEMs derived from 5 tandem-like CSK pairs. In order to suppress the atmospheric signal we experimented a classical spatial filtering of the differential phase as well as the use of numerical weather prediction (NWP) model RAMS. Tandem-like pairs with normal baselines higher than 300 m allows to derive DEMs fulfilling the HRTI Level 3 specifications on the relative vertical accuracy, while the use of NWP models still seems unfeasible especially for X-band