Automated Observability Investigation of Analog Electronic Circuits using SPICE

In the present paper, a computer-aided approach to fault observability investigation of linear analog circuits is developed. The method is based on sensitivity investigation of the test characteristics in the frequency domain. The test frequencies are selected maximizing the sensitivity of the magnitude of the test characteristics. Applying postprocessing of the simulation results using macrodefinitions in the graphical analyzer Probe, a fault observability investigation of the circuit is performed. A number of sensitivity measures are defined in Probe for observability investigation of multiple faults using pre-defined macrodefinitions. The sensitivity of S-parameters is obtained in order to investigate the fault observability at RF

Oscillation-based DFT for Second-order Bandpass OTA-C Filters

This document is the Accepted Manuscript version. Under embargo until 6 September 2018. The final publication is available at Springer via https://doi.org/10.1007/s00034-017-0648-9.This paper describes a design for testability technique for second-order bandpass operational transconductance amplifier and capacitor filters using an oscillation-based test topology. The oscillation-based test structure is a vectorless output test strategy easily extendable to built-in self-test. The proposed methodology converts filter under test into a quadrature oscillator using very simple techniques and measures the output frequency. Using feedback loops with nonlinear block, the filter-to-oscillator conversion techniques easily convert the bandpass OTA-C filter into an oscillator. With a minimum number of extra components, the proposed scheme requires a negligible area overhead. The validity of the proposed method has been verified using comparison between faulty and fault-free simulation results of Tow-Thomas and KHN OTA-C filters. Simulation results in 0.25μm CMOS technology show that the proposed oscillation-based test strategy for OTA-C filters is suitable for catastrophic and parametric faults testing and also effective in detecting single and multiple faults with high fault coverage.Peer reviewedFinal Accepted Versio

Methods for testing of analog circuits

Práce se zabývá metodami pro testování lineárních analogových obvodů v kmitočtové oblasti. Cílem je navrhnout efektivní metody pro automatické generování testovacího plánu. Snížením počtu měření a výpočetní náročnosti lze výrazně snížit náklady za testování. Práce se zabývá multifrekveční parametrickou poruchovou analýzou, která byla plně implementována do programu Matlab. Vhodnou volbou testovacích kmitočtů lze potlačit chyby měření a chyby způsobené výrobními tolerancemi obvodových prvků. Navržené metody pro optimální volbu kmitočtů byly statisticky ověřeny metodou MonteCarlo. Pro zvýšení přesnosti a snížení výpočetní náročnosti poruchové analýzy byly vyvinuty postupy založené na metodě nejmenších čtverců a přibližné symbolické analýze.The thesis deals with methods for testing of linear analog circuits in the frequency domain. The goal is to develop new efficient methods for automatic test plan generation. To reduce test costs a minimum number of measurements as well as less computational demands are the fundamental aims. The thesis is focused on the multi-frequency parametric fault diagnosis which was fully implemented in the Matlab program. The fundamental problem consists in selection of test frequencies which can reduce the influences of measurement errors and errors caused by tolerances of well-working components. The proposed methods for test frequency selection were statistically verified by the MonteCarlo method. To improve the accuracy and reduce the computational complexity of fault diagnosis, the methods based on least-square techniques and approximate symbolic analysis were presented.

Product assurance technology for custom LSI/VLSI electronics

The technology for obtaining custom integrated circuits from CMOS-bulk silicon foundries using a universal set of layout rules is presented. The technical efforts were guided by the requirement to develop a 3 micron CMOS test chip for the Combined Release and Radiation Effects Satellite (CRRES). This chip contains both analog and digital circuits. The development employed all the elements required to obtain custom circuits from silicon foundries, including circuit design, foundry interfacing, circuit test, and circuit qualification

Construction of an Expert System Based on Fuzzy Logic for Diagnosis of Analog Electronic Circuits

The paper presents construction of the fuzzy logic system to analog circuits soft fault diagnosis. The classical dictionary construction is replaced by fuzzy rule system. The first part refers to analog fault diagnosis, its techniques, approaches and goals. It clarifies common strategy and define differences between detecting, locating and identifying a fault in analog electronic circuit. The second part is focused on a creation of fuzzy rule expert system with use of sensitivity functions and known circuit topology. To detect, locate and identify a faulty element in a circuit the sensitivity matrix is used. The advantage of the method is its utilization in all, AC, DC and time domain. The fuzzy system, like the classical fault dictionary, can detect and locate single catastrophic faults and, on the contrary to the classical one, it also detects and locates parametric faults. Moreover, it allows identification of these faults, such that sign of the faulty parameter deviation is designated. The method has deterministic character as well as  it can be applied on the verification and production stage

Regression modeling for digital test of ΣΔ modulators

The cost of Analogue and Mixed-Signal circuit testing is an important bottleneck in the industry, due to timeconsuming verification of specifications that require state-ofthe- art Automatic Test Equipment. In this paper, we apply the concept of Alternate Test to achieve digital testing of converters. By training an ensemble of regression models that maps simple digital defect-oriented signatures onto Signal to Noise and Distortion Ratio (SNDR), an average error of 1:7% is achieved. Beyond the inference of functional metrics, we show that the approach can provide interesting diagnosis information.Ministerio de Educación y Ciencia TEC2007-68072/MICJunta de Andalucía TIC 5386, CT 30

New techniques for selecting test frequencies for linear analog circuits

International audienceIn this paper we show that the problem of minimizing the number of test frequencies necessary to detect all possible faults in a multi-frequency test approach for linear analog circuits can be modeled as a set covering problem. We will show in particular, that under some conditions on the considered faults, the coefficient matrix of the problem has the strong consecutive-ones property and hence the corresponding set covering problem can be solved in polynomial time. For an efficient solution of the problem, an interval graph formulation is also used and a polynomial algorithm using the interval graph structure is suggested. The optimization of test frequencies for a case-study biquadratic filter is presented for illustration purposes. Numerical simulations with a set of randomly generated problem instances demonstrate two different implementation approaches to solve the optimization problem very fast, with a good time complexity

A verification technique for multiple soft fault diagnosis of linear analog circuits

The paper deals with multiple soft fault diagnosis of linear analog circuits. A fault verification method is developed that allows estimating the values of a set of the parameters considered as potentially faulty. The method exploits the transmittance of the circuit and is based on a diagnostic test leading to output signal in discrete form. Applying Z-transform a diagnostic equation is written which is next reproduced. The obtained system of equations consisting of larger number of equations than the number of the parameters is solved using appropriate numerical approach. The method is adapted to real circumstances taking into account scattering of the fault–free parameters within their tolerance ranges and some errors produced by the method. In consequence, the results provided by the method have the form of ranges including the values of the tested parameters. To illustrate the method two examples of real electronic circuits are given

New techniques for selecting test frequencies for linear analog circuits

International audienceIn this paper we show that the problem of minimizing the number of test frequencies necessary to detect all possible faults in a multi-frequency test approach for linear analog circuits can be modeled as a set covering problem. We will show in particular, that under some conditions on the considered faults, the coefficient matrix of the problem has the strong consecutive-ones property and hence the corresponding set covering problem can be solved in polynomial time. For an efficient solution of the problem, an interval graph formulation is also used and a polynomial algorithm using the interval graph structure is suggested. The optimization of test frequencies for a case-study biquadratic filter is presented for illustration purposes. Numerical simulations with a set of randomly generated problem instances demonstrate two different implementation approaches to solve the optimization problem very fast, with a good time complexity