Study of large adaptive arrays for space technology applications

The research in large adaptive antenna arrays for space technology applications is reported. Specifically two tasks were considered. The first was a system design study for accurate determination of the positions and the frequencies of sources radiating from the earth's surface that could be used for the rapid location of people or vehicles in distress. This system design study led to a nonrigid array about 8 km in size with means for locating the array element positions, receiving signals from the earth and determining the source locations and frequencies of the transmitting sources. It is concluded that this system design is feasible, and satisfies the desired objectives. The second task was an experiment to determine the largest earthbound array which could simulate a spaceborne experiment. It was determined that an 800 ft array would perform indistinguishably in both locations and it is estimated that one several times larger also would serve satisfactorily. In addition the power density spectrum of the phase difference fluctuations across a large array was measured. It was found that the spectrum falls off approximately as f to the minus 5/2 power

NASA Tech Briefs, August 2012

Topics covered include: Mars Science Laboratory Drill; Ultra-Compact Motor Controller; A Reversible Thermally Driven Pump for Use in a Sub-Kelvin Magnetic Refrigerator; Shape Memory Composite Hybrid Hinge; Binding Causes of Printed Wiring Assemblies with Card-Loks; Coring Sample Acquisition Tool; Joining and Assembly of Bulk Metallic Glass Composites Through Capacitive Discharge; 670-GHz Schottky Diode-Based Subharmonic Mixer with CPW Circuits and 70-GHz IF; Self-Nulling Lock-in Detection Electronics for Capacitance Probe Electrometer; Discontinuous Mode Power Supply; Optimal Dynamic Sub-Threshold Technique for Extreme Low Power Consumption for VLSI; Hardware for Accelerating N-Modular Redundant Systems for High-Reliability Computing; Blocking Filters with Enhanced Throughput for X-Ray Microcalorimetry; High-Thermal-Conductivity Fabrics; Imidazolium-Based Polymeric Materials as Alkaline Anion-Exchange Fuel Cell Membranes; Electrospun Nanofiber Coating of Fiber Materials: A Composite Toughening Approach; Experimental Modeling of Sterilization Effects for Atmospheric Entry Heating on Microorganisms; Saliva Preservative for Diagnostic Purposes; Hands-Free Transcranial Color Doppler Probe; Aerosol and Surface Parameter Retrievals for a Multi-Angle, Multiband Spectrometer LogScope; TraceContract; AIRS Maps from Space Processing Software; POSTMAN: Point of Sail Tacking for Maritime Autonomous Navigation; Space Operations Learning Center; OVERSMART Reporting Tool for Flow Computations Over Large Grid Systems; Large Eddy Simulation (LES) of Particle-Laden Temporal Mixing Layers; Projection of Stabilized Aerial Imagery Onto Digital Elevation Maps for Geo-Rectified and Jitter-Free Viewing; Iterative Transform Phase Diversity: An Image-Based Object and Wavefront Recovery; 3D Drop Size Distribution Extrapolation Algorithm Using a Single Disdrometer; Social Networking Adapted for Distributed Scientific Collaboration; General Methodology for Designing Spacecraft Trajectories; Hemispherical Field-of-View Above-Water Surface Imager for Submarines; and Quantum-Well Infrared Photodetector (QWIP) Focal Plane Assembly

NASA Tech Briefs, September 2005

Topivs include: Diamond-Coated Carbon Nanotubes for Efficient Field Emission; Improved Anode Coatings for Direct Methanol Fuel Cells; Advanced Ablative Insulators and Methods of Making Them; PETIs as High-Temperature Resin-Transfer-Molding Materials; Stable Polyimides for Terrestrial and Space Uses; Low-Density, Aerogel-Filled Thermal-Insulation Tiles; High-Performance Polymers Having Low Melt Viscosities; Nonflammable, Hydrophobic Aerogel Composites for Insulation; Front-Side Microstrip Line Feeding a Raised Antenna Patch; Medium-Frequency Pseudonoise Georadar; Facilitating Navigation Through Large Archives; Program for Weibull Analysis of Fatigue Data; Comprehensive Micromechanics-Analysis Code - Version 4.0; Component-Based Visualization System; Software for Engineering Simulations of a Spacecraft; LabVIEW Interface for PCI-SpaceWire Interface Card; Path Following with Slip Compensation for a Mars Rover; International Space Station Electric Power System Performance Code-SPACE; Software for Automation of Real-Time Agents, Version 2; Software for Optimizing Plans Involving Interdependent Goals; Computing Gravitational Fields of Finite-Sized Bodies; Custom Sky-Image Mosaics from NASA's Information Power Grid; ANTLR Tree Grammar Generator and Extensions; Generic Kalman Filter Software; Alignment Stage for a Cryogenic Dilatometer; Rugged Iris Mechanism; Treatments To Produce Stabilized Aluminum Mirrors for Cryogenic Uses; Making AlNx Tunnel Barriers Using a Low-Energy Nitrogen-Ion Beam; Making Wide-IF SIS Mixers with Suspended Metal-Beam Leads; Sol-Gel Glass Holographic Light-Shaping Diffusers; Automated Counting of Particles To Quantify Cleanliness; Phase Correction for GPS Antenna with Nonunique Phase Center; Compact Infrasonic Windscreen; Broadband External-Cavity Diode Laser; High-Efficiency Solar Cells Using Photonic-Bandgap Materials; Generating Solid Models from Topographical Data; Computationally Lightweight Air-Traffic-Control Simulation; Spool Valve for Switching Air Flows Between Two Beds; Partial Model of Insulator/ Insulator Contact Charging; Asymmetric Electrostatic Radiation Shielding for Spacecraft; and Reusable Hybrid Propellant Modules for Outer-Space Transport

A galaxy cluster finding algorithm for large-scale photometric surveys

As the largest gravitationally bound objects in the Universe, galaxy clusters can be used to probe a variety of topics in astrophysics and cosmology. This thesis describes the development of an algorithm to find galaxy clusters using non-parameteric methods applied to catalogs of galaxies generated from multi-colour CCD observations. It is motivated by the emergence of increasingly large, photometric galaxy surveys and the measurement of key cosmological parameters through the evolution of the cluster mass function. The algorithm presented herein is a reconstruction of the successful, spectroscopic cluster finding algorithm, C4 (Miller et al., 2005), and adapting it to large photometric surveys with the goal of applying it to data from the Dark Energy Survey (DES). AperC4 uses statistical techniques to identify collections of galaxies that are unusually clustered in a multi-dimensional space. To characterize the new algorithm, it is tested with simulations produced by the DES Collaboration and I evaluate its application to photometric datasets. In doing so, I show how AperC4 functions as a cosmology independent cluster finder and formulate metrics for a \successful" cluster finder. Finally, I produce a galaxy catalog appropriate for statistical analysis. C4 is applied to the SDSS galaxy catalog and the resulting cluster catalog is presented with some initial analyses

Measurement of the production cross section of four top quarks in proton-proton collisions at 13 TeV

The field of particle physics involves not only searches for new particles and measurements of their interactions, but also the design and construction of advanced particle detectors. This thesis presents the measurement of the production cross section of four top quarks in proton-proton collisions at a center-of-mass energy of 13 TeV using 137 fb$^{-1}$ of integrated luminosity recorded by the CMS experiment at the LHC. This analysis considers events in the final state of a same-sign pair of leptons, notable for being a final state with relatively few Standard Model background events. A boosted decision tree is utilized to discriminate four top quark events from background events. The four top quark production cross section is measured to be $12.6^{+5.8}_{-5.2}$ fb, consistent with the Standard Model prediction. This measurement is used to constrain the top quark\u27s Yukawa coupling as well as various theories beyond the Standard Model. This thesis also describes the construction and testing of silicon pixel detector modules used in the Phase I upgrade of the CMS pixel detector, and optimization of electron reconstruction methods using the new detector. The role of automated module assembly and quality assurance will be discussed, as well as work towards the construction of a high precision silicon strip detector based telescope. Adviser: Professor Frank Gol

Measurement of the production cross section of four top quarks in proton-proton collisions at 13 TeV

The field of particle physics involves not only searches for new particles and measurements of their interactions, but also the design and construction of advanced particle detectors. This thesis presents the measurement of the production cross section of four top quarks in proton-proton collisions at a center-of-mass energy of 13 TeV using 137 fb$^{-1}$ of integrated luminosity recorded by the CMS experiment at the LHC. This analysis considers events in the final state of a same-sign pair of leptons, notable for being a final state with relatively few Standard Model background events. A boosted decision tree is utilized to discriminate four top quark events from background events. The four top quark production cross section is measured to be $12.6^{+5.8}_{-5.2}$ fb, consistent with the Standard Model prediction. This measurement is used to constrain the top quark\u27s Yukawa coupling as well as various theories beyond the Standard Model. This thesis also describes the construction and testing of silicon pixel detector modules used in the Phase I upgrade of the CMS pixel detector, and optimization of electron reconstruction methods using the new detector. The role of automated module assembly and quality assurance will be discussed, as well as work towards the construction of a high precision silicon strip detector based telescope. Adviser: Professor Frank Gol

NASA Tech Briefs, July 2007

Topics covered include: Miniature Intelligent Sensor Module; "Smart" Sensor Module; Portable Apparatus for Electrochemical Sensing of Ethylene; Increasing Linear Dynamic Range of a CMOS Image Sensor; Flight Qualified Micro Sun Sensor; Norbornene-Based Polymer Electrolytes for Lithium Cells; Making Single-Source Precursors of Ternary Semiconductors; Water-Free Proton-Conducting Membranes for Fuel Cells; Mo/Ti Diffusion Bonding for Making Thermoelectric Devices; Photodetectors on Coronagraph Mask for Pointing Control; High-Energy-Density, Low-Temperature Li/CFx Primary Cells; G4-FETs as Universal and Programmable Logic Gates; Fabrication of Buried Nanochannels From Nanowire Patterns; Diamond Smoothing Tools; Infrared Imaging System for Studying Brain Function; Rarefying Spectra of Whispering-Gallery-Mode Resonators; Large-Area Permanent-Magnet ECR Plasma Source; Slot-Antenna/Permanent-Magnet Device for Generating Plasma; Fiber-Optic Strain Gauge With High Resolution And Update Rate; Broadband Achromatic Telecentric Lens; Temperature-Corrected Model of Turbulence in Hot Jet Flows; Enhanced Elliptic Grid Generation; Automated Knowledge Discovery From Simulators; Electro-Optical Modulator Bias Control Using Bipolar Pulses; Generative Representations for Automated Design of Robots; Mars-Approach Navigation Using In Situ Orbiters; Efficient Optimization of Low-Thrust Spacecraft Trajectories; Cylindrical Asymmetrical Capacitors for Use in Outer Space; Protecting Against Faults in JPL Spacecraft; Algorithm Optimally Allocates Actuation of a Spacecraft; and Radar Interferometer for Topographic Mapping of Glaciers and Ice Sheets

A metaheuristic optimization approach for energy efficiency in the IoT networks

© 2020 John Wiley & Sons, Ltd. Recently Internet of Things (IoT) is being used in several fields like smart city, agriculture, weather forecasting, smart grids, waste management, etc. Even though IoT has huge potential in several applications, there are some areas for improvement. In the current work, we have concentrated on minimizing the energy consumption of sensors in the IoT network that will lead to an increase in the network lifetime. In this work, to optimize the energy consumption, most appropriate Cluster Head (CH) is chosen in the IoT network. The proposed work makes use of a hybrid metaheuristic algorithm, namely, Whale Optimization Algorithm (WOA) with Simulated Annealing (SA). To select the optimal CH in the clusters of IoT network, several performance metrics such as the number of alive nodes, load, temperature, residual energy, cost function have been used. The proposed approach is then compared with several state-of-the-art optimization algorithms like Artificial Bee Colony algorithm, Genetic Algorithm, Adaptive Gravitational Search algorithm, WOA. The results prove the superiority of the proposed hybrid approach over existing approaches

Evolutionary Algorithms in Engineering Design Optimization

Evolutionary algorithms (EAs) are population-based global optimizers, which, due to their characteristics, have allowed us to solve, in a straightforward way, many real world optimization problems in the last three decades, particularly in engineering fields. Their main advantages are the following: they do not require any requisite to the objective/fitness evaluation function (continuity, derivability, convexity, etc.); they are not limited by the appearance of discrete and/or mixed variables or by the requirement of uncertainty quantification in the search. Moreover, they can deal with more than one objective function simultaneously through the use of evolutionary multi-objective optimization algorithms. This set of advantages, and the continuously increased computing capability of modern computers, has enhanced their application in research and industry. From the application point of view, in this Special Issue, all engineering fields are welcomed, such as aerospace and aeronautical, biomedical, civil, chemical and materials science, electronic and telecommunications, energy and electrical, manufacturing, logistics and transportation, mechanical, naval architecture, reliability, robotics, structural, etc. Within the EA field, the integration of innovative and improvement aspects in the algorithms for solving real world engineering design problems, in the abovementioned application fields, are welcomed and encouraged, such as the following: parallel EAs, surrogate modelling, hybridization with other optimization techniques, multi-objective and many-objective optimization, etc