Adaptive Network Densification with Small Cell Mobile Base Stations Carried by Vehicles

1noL'abstract è presente nell'allegato / the abstract is in the attachmentopen676. INGEGNERIA ELETTRICAnopartially_openembargoed_20211014Mohammadnia, Foroog

Efficient Employment of Large Format Sensor Data Transfer Architectures

Due to the increasing quantity of data collected by Air Force intelligence, surveillance and reconnaissance (ISR) assets and the focus on timely access to the data collected by these systems, operational data transfer network architectures have become a critical component of their employment in the intelligence production process. Efficient utilization of the provided long-haul communications component of the ISR system improves the value of the single asset to the warfighter and enables connectivity of additional assets via the data transfer network architecture. This research effort focused on the creation and implementation of a structured test design methodology based on the principles of Design of Experiments to propose recommendations for optimization of one such operational architecture while avoiding the common pitfalls of inadequate and inefficient test design and implementation. Factors that could influence the performance of the data transfer network architecture were researched and evaluated to recommend the factors of interest that most greatly affect the efficiency of the operational architecture. To support this evaluation, an emulated network testbed was utilized to develop a representative model of system efficiency. The results of this model indicate that increased aggressiveness for data transfer leads to decreased efficiency in the attempt to utilize available network resources, especially in realm of operations under study that represent non-traditional bandwidth delay product (BDP) networks where network delay is the dominating factor in the determination of BDP. The analysis documented a baseline model of system performance that will be used to guide ongoing maintenance, sustainment and enhancement efforts for the current data transfer capability and provides insight into the recommended test design process for use in development and deployment of future capabilities. The ability to model system performance through the use of a structured and straight-forward process allows for the inclusion of the test design and analysis process in software design and development, as well as, system deployment and operations improvements

Ethernet Networks for Real-Time Use in the ATLAS Experiment

Ethernet became today's de-facto standard technology for local area networks. Defined by the IEEE 802.3 and 802.1 working groups, the Ethernet standards cover technologies deployed at the first two layers of the OSI protocol stack. The architecture of modern Ethernet networks is based on switches. The switches are devices usually built using a store-and-forward concept. At the highest level, they can be seen as a collection of queues and mathematically modelled by means of queuing theory. However, the traffic profiles on modern Ethernet networks are rather different from those assumed in classical queuing theory. The standard recommendations for evaluating the performance of network devices define the values that should be measured but do not specify a way of reconciling these values with the internal architecture of the switches. The introduction of the 10 Gigabit Ethernet standard provided a direct gateway from the LAN to the WAN by the means of the WAN PHY. Certain aspects related to the actual use of WAN PHY technology were vaguely defined by the standard. The ATLAS experiment at CERN is scheduled to start operation at CERN in 2007. The communication infrastructure of the Trigger and Data Acquisition System will be built using Ethernet networks. The real-time operational needs impose a requirement for predictable performance on the network part. In view of the diversity of the architectures of Ethernet devices, testing and modelling is required in order to make sure the full system will operate predictably. This thesis focuses on the testing part of the problem and addresses issues in determining the performance for both LAN and WAN connections. The problem of reconciling results from measurements to architectural details of the switches will also be tackled. We developed a scalable traffic generator system based on commercial-off-the-shelf Gigabit Ethernet network interface cards. The generator was able to transmit traffic at the nominal Gigabit Ethernet line rate for all frame sizes specified in the Ethernet standard. The calculation of latency was performed with accuracy in the range of +/- 200 ns. We indicate how certain features of switch architectures may be identified through accurate throughput and latency values measured for specific traffic distributions. At this stage, we present a detailed analysis of Ethernet broadcast support in modern switches. We use a similar hands-on approach to address the problem of extending Ethernet networks over long distances. Based on the 1 Gbit/s traffic generator used in the LAN, we develop a methodology to characterise point-to-point connections over long distance networks. At higher speeds, a combination of commercial traffic generators and high-end servers is employed to determine the performance of the connection. We demonstrate that the new 10 Gigabit Ethernet technology can interoperate with the installed base of SONET/SDH equipment through a series of experiments on point-to-point circuits deployed over long-distance network infrastructure in a multi-operator domain. In this process, we provide a holistic view of the end-to-end performance of 10 Gigabit Ethernet WAN PHY connections through a sequence of measurements starting at the physical transmission layer and continuing up to the transport layer of the OSI protocol stack

Efficient High Performance Protocols For Long Distance Big Data File Transfer

Data sets are collected daily in large amounts (Big Data) and they are increasing rapidly due to various use cases and the number of devices used. Researchers require easy access to Big Data in order to analyze and process it. At some point this data may need to be transferred over the network to various distant locations for further processing and analysis by researchers around the globe. Such data transfers require the use of data transfer protocols that would ensure efficient and fast delivery on high speed networks. There have been several new data transfer protocols introduced which are either TCP-based or UDP-based, and the literature has some comparative analysis studies on such protocols, but not a side-by-side comparison of the protocols used in this work. I considered several data transfer protocols and congestion control mechanisms GridFTP, FASP, QUIC, BBR, and LEDBAT, which are potential candidates for comparison in various scenarios. These protocols aim to utilize the available bandwidth fairly among competing flows and to provide reduced packet loss, reduced latency, and fast delivery of data. In this thesis, I have investigated the behaviour and performance of the data transfer protocols in various scenarios. These scenarios included transfers with various file sizes, multiple flows, background and competing traffic. The results show that FASP and GridFTP had the best performance among all the protocols in most of the scenarios, especially for long distance transfers with large bandwidth delay product (BDP). The performance of QUIC was the lowest due to the nature of its current implementation, which limits the size of the transferred data and the bandwidth used. TCP BBR performed well in short distance scenarios, but its performance degraded as the distance increased. The performance of LEDBAT was unpredictable, so a complete evaluation was not possible. Comparing the performance of protocols with background traffic and competing traffic showed that most of the protocols were fair except for FASP, which was aggressive. Also, the resource utilization for each protocol on the sender and receiver side was measured with QUIC and FASP having the highest CPU utilization

End-to-End Resilience Mechanisms for Network Transport Protocols

The universal reliance on and hence the need for resilience in network communications has been well established. Current transport protocols are designed to provide fixed mechanisms for error remediation (if any), using techniques such as ARQ, and offer little or no adaptability to underlying network conditions, or to different sets of application requirements. The ubiquitous TCP transport protocol makes too many assumptions about underlying layers to provide resilient end-to-end service in all network scenarios, especially those which include significant heterogeneity. Additionally the properties of reliability, performability, availability, dependability, and survivability are not explicitly addressed in the design, so there is no support for resilience. This dissertation presents considerations which must be taken in designing new resilience mechanisms for future transport protocols to meet service requirements in the face of various attacks and challenges. The primary mechanisms addressed include diverse end-to-end paths, and multi-mode operation for changing network conditions

Enhancing QUIC over Satellite Networks

The use of Satellite Communication (SATCOM) networks for broadband connectivity has recently seen an increase in popularity due to, among other factors, the rise of the latest generations of cellular networks (5G/6G) and the deployment of high-throughput satellites. In parallel, major advances have been witnessed in the context of the transport layer: first, the standardization and early deployment of QUIC, a new-generation and general-purpose transport protocol; and second, modern congestion control proposals such as the Bottleneck Bandwidth and Round-trip propagation time (BBR) algorithm. Even though satellite links introduce several challenges for transport layer mechanisms, mainly due to their long propagation delay, satellite Internet providers have relied on TCP connection-splitting solutions implemented by Performance-Enhancing Proxies (PEPs) to greatly overcome many of these challenges. However, due to QUIC's fully encrypted nature, these performance-boosting solutions become nearly impossible for QUIC traffic, leaving it in great disadvantage when competing against TCP-PEP. In this context, IETF QUIC WG contributors are currently investigating this matter and suggesting new solutions that can help improve QUIC's performance over SATCOM. This thesis aims to study some of these proposals and evaluate them through experimentation using a real network testbed and an emulated satellite link

Models and Methods for Network Selection and Balancing in Heterogeneous Scenarios

The outbreak of 5G technologies for wireless communications can be considered a response to the need for widespread coverage, in terms of connectivity and bandwidth, to guarantee broadband services, such as streaming or on-demand programs offered by the main television networks or new generation services based on augmented and virtual reality (AR / VR). The purpose of the study conducted for this thesis aims to solve two of the main problems that will occur with the outbreak of 5G, that is, the search for the best possible connectivity, in order to offer users the resources necessary to take advantage of the new generation services, and multicast as required by the eMBMS. The aim of the thesis is the search for innovative algorithms that will allow to obtain the best connectivity to offer users the resources necessary to use the 5G services in a heterogeneous scenario. Study UF that allows you to improve the search for the best candidate network and to achieve a balance that allows you to avoid congestion of the chosen networks. To achieve these two important focuses, I conducted a study on the main mathematical methods that made it possible to select the network based on QoS parameters based on the type of traffic made by users. A further goal was to improve the computational computation performance they present. Furthermore, I carried out a study in order to obtain an innovative algorithm that would allow the management of multicast. The algorithm that has been implemented responds to the needs present in the eMBMS, in realistic scenarios