China’s 10-year progress in DC gas-insulated equipment: From basic research to industry perspective

The construction of the future energy structure of China under the 2050 carbon-neutral vision requires compact direct current (DC) gas-insulation equipment as important nodes and solutions to support electric power transmission and distribution of long-distance and large-capacity. This paper reviews China's 10-year progress in DC gas-insulated equipment. Important progresses in basic research and industry perspective are presented, with related scientific issues and technical bottlenecks being discussed. The progress in DC gas-insulated equipment worldwide (Europe, Japan, America) is also reported briefly

Environmental pollution effects on insulators of high voltage overhead transmission line for locomotives.

Masters Degree. University of KwaZulu-Natal, Durban.The primary focus of this research is to report thoroughly on the addressed key questions of the proposal and to successfully compile a simulation based on environmental pollution effects on insulators of high voltage overhead transmission line for locomotives. The simulation design is done on FEMM, which provides useful models for solving electromagnetic problems, which will assist to compile a suitable insulation model design with results that can be interpreted in detail. This report includes the theoretical background of a high voltage insulator for different materials with different sizes and shapes affected by different environmental conditions. Ceramic insulators appear to be extremely susceptible. Polymeric insulators specially of silicone-rubber have achieved better performance under polluted states and have found increasing usage. The feasibility study conducted shows that the simulation design is feasible and transparent. The IEEE and ScienceDirect publications are the suitable sources that are used to conduct the literature review. The method used to collect data and information or research strategy which summarizes the way in which research will be undertaken is conduced. Furthermore, the preliminary research results and analysis evolve after investigating and analyzing the electric field distribution of a polymeric insulator, which is commonly used on high voltage overhead transmission line for locomotives when it is dry and when a water drop is applied with and without a corona ring. In the three cases investigated, the first case is when the insulator was dry, the second case is when water droplets reside as a discrete droplet on a polymeric insulator made of a silicon rubber material and the third case is when the corona ring is added, simulation was executed for both typical and optimized insulators. It was found that the presents of water droplets on the insulators either due to rain, fog, etc. leads to electric field enhancement causing partial discharge and dry arc which ultimately results in complete flashover. The current work has resulted in a simple model to estimate the flashover voltage of a polymeric insulator under contaminated states. To ensure reliability, simulation results are compared with existing work carried in the past

Outdoor Insulation and Gas Insulated Switchgears

This book focuses on theoretical and practical developments in the performance of high-voltage transmission line against atmospheric pollution and icing. Modifications using suitable fillers are also pinpointed to improve silicone rubber insulation materials. Very fast transient overvoltage (VFTO) mitigation techniques, along with some suggestions for reliable partial discharge measurements under DC voltage stresses inside gas-insulated switchgears, are addressed. The application of an inductor-based filter for the protective performance of surge arresters against indirect lightning strikes is also discussed

Design and reliability of polymeric packages for high voltage power semiconductors

This thesis focuses on the development of a novel polymer based housing for power thyristor devices typically used in long distance high voltage direct current (HVDC) transmission. Power thyristor devices used in HVDC power conversion stations are typically packaged in a hermetically sealed ceramic housing and have demonstrated an excellent history of reliability and performance. However, to avoid increasing the number of thyristors in future higher powered HVDC schemes thyristors having higher power ratings at 8.5 kV and sizes at 125 mm and 150 mm diameters are sought for implementation to achieve higher transmission ratings of, for example, 4000 A at +/- 800 kV. The main disadvantages of such large ceramic-based packages are higher processing cost and weight whilst robustness is also a concern. To overcome these issues, replacing the current ceramic housing with a polymeric material has been investigated in this project. The advantages it is anticipated such packages will provide include lower cost, less weight, robustness, recyclability, etc. However, some challenges it will also offer are: non-hermeticity i.e. polymers are moisture and gas permeable, potentially more complex manufacturing routes, and different electrical, mechanical and thermal properties compared to ceramic materials. The work presented in this thesis was part of a larger project where these challenges have been addressed by developing and testing a prototype polymeric thyristor housing. The prototype is aimed at demonstrating that polymer packages can deliver performance and reliability comparable to, if not better than, current ceramic packages. In this thesis, it is the package development and reliability related studies that are discussed. Because the housings will experience severe electrical stresses and various thermal excursions during their service life, the electrical and thermo-mechanical behaviour of the polymer housing was studied using finite element analysis to gain an understanding of the effects of various design variables and materials properties on performance and the tradeoffs between performance and manufacturability. From these modelling studies, design guidelines have been established for the future development of polymer housings. On the other hand, to identify the physics-of-failure of the prototype that was manufactured as part of the project, accelerated life tests were performed to study its reliability. The knowledge gained from the polymer prototype development was then applied to the design of a larger 125 mm diameter housing using the Taguchi method of experimental design

Design and Control of Power Converters for High Power-Quality Interface with Utility and Aviation Grids

Power electronics as a subject integrating power devices, electric and electronic circuits, control, and thermal and mechanic design, requires not only knowledge and engineering insight for each subarea, but also understanding of interface issues when incorporating these different areas into high performance converter design.Addressing these fundamental questions, the dissertation studies design and control issues in three types of power converters applied in low-frequency high-power transmission, medium-frequency converter emulated grid, and high-frequency high-density aviation grid, respectively, with the focus on discovering, understanding, and mitigating interface issues to improve power quality and converter performance, and to reduce the noise emission.For hybrid ac/dc power transmission,• Analyze the interface transformer saturation issue between ac and dc power flow under line unbalances.• Proposed both passive transformer design and active hybrid-line-impedance-conditioner to suppress this issue.For transmission line emulator,• Propose general transmission line emulation schemes with extension capability.• Analyze and actively suppress the effects of sensing/sampling bias and PWM ripple on emulation considering interfaced grid impedance.• Analyze the stability issue caused by interaction of the emulator and its interfaced impedance. A criterion that determines the stability and impedance boundary of the emulator is proposed.For aircraft battery charger,• Investigate architectures for dual-input and dual-output battery charger, and a three-level integrated topology using GaN devices is proposed to achieve high density.• Identify and analyze the mechanisms and impacts of high switching frequency, di/dt, dv/dt on sensing and power quality control; mitigate solutions are proposed.• Model and compensate the distortion due to charging transition of device junction capacitances in three-level converters.• Find the previously overlooked device junction capacitance of the nonactive devices in three-level converters, and analyze the impacts on switching loss, device stress, and current distortion. A loss calculation method is proposed using the data from the conventional double pulse tester.• Establish fundamental knowledge on performance degradation of EMI filters. The impacts and mechanisms of both inductive and capacitive coupling on different filter structures are understood. Characterization methodology including measuring, modeling, and prediction of filter insertion loss is proposed. Mitigation solutions are proposed to reduce inter-component coupling and self-parasitics

Selected Papers from 2020 IEEE International Conference on High Voltage Engineering (ICHVE 2020)

The 2020 IEEE International Conference on High Voltage Engineering (ICHVE 2020) was held on 6–10 September 2020 in Beijing, China. The conference was organized by the Tsinghua University, China, and endorsed by the IEEE Dielectrics and Electrical Insulation Society. This conference has attracted a great deal of attention from researchers around the world in the field of high voltage engineering. The forum offered the opportunity to present the latest developments and different emerging challenges in high voltage engineering, including the topics of ultra-high voltage, smart grids, and insulating materials

HASTECS: Hybrid Aircraft: reSearch on Thermal and Electric Components and Systems

In 2019, transportation was the fastest growing sector, contributing to environmental degradation. Finding sustainable solutions that pollute less is a key element in solving this problem, particularly for the aviation sector, which accounts for around 2-3% of global CO2 emissions. With the advent of Covid-19, air traffic seems to have come to a fairly permanent halt, but this pandemic reinforces the need to move towards a "cleaner sky" and respect for the environment, which is the objective of the Clean Sky2 program (H2020 EU), the context in which the HASTECS project has been launched in September 2016

Personality Identification from Social Media Using Deep Learning: A Review

Social media helps in sharing of ideas and information among people scattered around the world and thus helps in creating communities, groups, and virtual networks. Identification of personality is significant in many types of applications such as in detecting the mental state or character of a person, predicting job satisfaction, professional and personal relationship success, in recommendation systems. Personality is also an important factor to determine individual variation in thoughts, feelings, and conduct systems. According to the survey of Global social media research in 2018, approximately 3.196 billion social media users are in worldwide. The numbers are estimated to grow rapidly further with the use of mobile smart devices and advancement in technology. Support vector machine (SVM), Naive Bayes (NB), Multilayer perceptron neural network, and convolutional neural network (CNN) are some of the machine learning techniques used for personality identification in the literature review. This paper presents various studies conducted in identifying the personality of social media users with the help of machine learning approaches and the recent studies that targeted to predict the personality of online social media (OSM) users are reviewed