Reconfigurable mechanism generated from the network of Bennett linkages

A network of four Bennett linkages is proposed in this paper. Totally five types of overconstrained 5R and 6R linkages, including the generalized Goldberg 5R linkage, generalized variant of the L-shape Goldberg 6R linkage, Waldron's hybrid 6R linkage, isomerized case of the generalized L-shape Goldberg 6R linkage, and generalized Wohlhart's double-Goldberg 6R linkage, can be constructed by modifying this Bennett network. The 8R linkage formed by Bennett network serves as the basic mechanism to realise the reconfiguration among five types of overconstrained linkages by rigidifying some of the eight joints. The work also reveals the in-depth relationship among the Bennett-based linkages, which provides a substantial advancement in the design of reconfigurable mechanisms using overconstrained linkages

A Rapidly Reconfigurable Robotics Workcell and Its Applictions for Tissue Engineering

This article describes the development of a component-based technology robot system that can be rapidly configured to perform a specific manufacturing task. The system is conceived with standard and inter-operable components including actuator modules, rigid link connectors and tools that can be assembled into robots with arbitrary geometry and degrees of freedom. The reconfigurable "plug-and-play" robot kinematic and dynamic modeling algorithms are developed. These algorithms are the basis for the control and simulation of reconfigurable robots. The concept of robot configuration optimization is introduced for the effective use of the rapidly reconfigurable robots. Control and communications of the workcell components are facilitated by a workcell-wide TCP/IP network and device level CAN-bus networks. An object-oriented simulation and visualization software for the reconfigurable robot is developed based on Windows NT. Prototypes of the robot systems configured to perform 3D contour following task and the positioning task are constructed and demonstrated. Applications of such systems for biomedical tissue scaffold fabrication are considered.Singapore-MIT Alliance (SMA

Autonomous Self-assembly in a Swarm-bot

Multi-robot systems have been studied in tasks that require the robots to be physically linked. In such a configuration, a group of robots may navigate a terrain that proves too difficult for a single robot. On the contrary, many collective tasks can be accomplished more efficiently by a group of independent robots. This paper is about swarm-bot, a robotic system that can operate in both configurations and autonomously switch from one to the other. We examine the performance of a single robot and of groups of robots selfassembling with an object or another robot. We assess the robustness of the system with respect to different types of rough terrain. Finally, we evaluate the performance of swarms of 16 physical robots. At present, for self-assembly in autonomous, mobile robotics, swarm-bots is the state of the art for what concerns reliability, robustness and speed

Toward Growing Robots: A Historical Evolution from Cellular to Plant-Inspired Robotics

This paper provides the very first definition of "growing robots": a category of robots that imitates biological growth by the incremental addition of material. Although this nomenclature is quite new, the concept of morphological evolution, which is behind growth, has been extensively addressed in engineering and robotics. In fact, the idea of reproducing processes that belong to living systems has always attracted scientists and engineers. The creation of systems that adapt reliably and effectively to the environment with their morphology and control would be beneficial for many different applications, including terrestrial and space exploration or the monitoring of disasters or dangerous environments. Different approaches have been proposed over the years for solving the morphological adaptation of artificial systems, e.g., self-assembly, self-reconfigurability, evolution of virtual creatures, plant inspiration. This work reviews the main milestones in relation to growing robots, starting from the original concept of a self-replicating automaton to the achievements obtained by plant inspiration, which provided an alternative solution to the challenges of creating robots with self-building capabilities. A selection of robots representative of growth functioning is also discussed, grouped by the natural element used as model: molecule, cell, or organism growth-inspired robots. Finally, the historical evolution of growing robots is outlined together with a discussion of the future challenges toward solutions that more faithfully can represent biological growth

Cooperation through self-assembly in multi-robot

This article illustrates the methods and results of two sets of experiments in which a group of mobile robots, called s-bots, are required to physically connect to each other, that is, to self-assemble, to cope with environmental conditions that prevent them from carrying out their task individually. The first set of experiments is a pioneering study on the utility of self-assembling robots to address relatively complex scenarios, such as cooperative object transport. The results of our work suggest that the s-bots possess hardware characteristics which facilitate the design of control mechanisms for autonomous self-assembly. The control architecture we developed proved particularly successful in guiding the robots engaged in the cooperative transport task. However, the results also showed that some features of the robots’ controllers had a disruptive effect on their performances. The second set of experiments is an attempt to enhance the adaptiveness of our multi-robot system. In particular, we aim to synthesise an integrated (i.e., not-modular) decisionmaking mechanism which allows the s-bot to autonomously decide whether or not environmental contingencies require self-assembly. The results show that it is possible to synthesize, by using evolutionary computation techniques, artificial neural networks that integrate both the mechanisms for sensory-motor coordination and for decision making required by the robots in the context of self-assembly

Opinions and Outlooks on Morphological Computation

Morphological Computation is based on the observation that biological systems seem to carry out relevant computations with their morphology (physical body) in order to successfully interact with their environments. This can be observed in a whole range of systems and at many different scales. It has been studied in animals – e.g., while running, the functionality of coping with impact and slight unevenness in the ground is "delivered" by the shape of the legs and the damped elasticity of the muscle-tendon system – and plants, but it has also been observed at the cellular and even at the molecular level – as seen, for example, in spontaneous self-assembly. The concept of morphological computation has served as an inspirational resource to build bio-inspired robots, design novel approaches for support systems in health care, implement computation with natural systems, but also in art and architecture. As a consequence, the field is highly interdisciplinary, which is also nicely reflected in the wide range of authors that are featured in this e-book. We have contributions from robotics, mechanical engineering, health, architecture, biology, philosophy, and others

Robotique collective et auto-assemblage:une étude mécatronique

We present a study of collective robotics by including a mechatronics point of view. In the field it is usually claimed that collective robots are simple and relatively cheap because they are produced in large quantities. Instead in our study we show that collective robots are not simple because they need sensors and actuators for additional work. Our experience in designing robots and producing them allows us to analyze the manufacturing costs of different collective robots . We present in this work four robots developed prior and during to this thesis. Chapter 2 concerns the e-puck robot. This is a robot designed for education, however, it is used in research to experiment collective behaviors. The s-bot robot is presented in Chapter 3. This is a robot that has the collective ability to self-assemble to form larger structures and increase its performance. In Chapter 4 we present the marXbot robot. It is a modular robot developed in the laboratory to meet the needs of different research hubs. One of its modules allows it to self-assemble with its teammates and with the robot handbot presented in Chapter 5. The handbot is a robot that can climb and handle objects. It can climb for example a shelf to grasp a book. On the ground it is transported by marXbot. In Chapter 6 the performance of robots are presented. We expose a study of their performance gain when the robots are self-assembled. Finally we compare in Chapter 7 the four robots from the mechatronics point of view and in respect to their cost