690 research outputs found
Modeling Heterogeneous Network Interference Using Poisson Point Processes
Cellular systems are becoming more heterogeneous with the introduction of low
power nodes including femtocells, relays, and distributed antennas.
Unfortunately, the resulting interference environment is also becoming more
complicated, making evaluation of different communication strategies
challenging in both analysis and simulation. Leveraging recent applications of
stochastic geometry to analyze cellular systems, this paper proposes to analyze
downlink performance in a fixed-size cell, which is inscribed within a weighted
Voronoi cell in a Poisson field of interferers. A nearest out-of-cell
interferer, out-of-cell interferers outside a guard region, and cross-tier
interference are included in the interference calculations. Bounding the
interference power as a function of distance from the cell center, the total
interference is characterized through its Laplace transform. An equivalent
marked process is proposed for the out-of-cell interference under additional
assumptions. To facilitate simplified calculations, the interference
distribution is approximated using the Gamma distribution with second order
moment matching. The Gamma approximation simplifies calculation of the success
probability and average rate, incorporates small-scale and large-scale fading,
and works with co-tier and cross-tier interference. Simulations show that the
proposed model provides a flexible way to characterize outage probability and
rate as a function of the distance to the cell edge.Comment: Submitted to the IEEE Transactions on Signal Processing, July 2012,
Revised December 201
Joint Use of On-board Reconfigurable Antenna Pattern and Adaptive Coding and Modulation in Satellite Communications at High Frequency Bands
The Telecommunication market is driven by the increasing need of the end users for multimedia services which require high data rates. Within the fixed satellite service, frequency bandwidths wide enough to carry such high data rates are to be found in Ka band (26-40 GHz), and Q/V bands (40-50 GHz). However, at Ka band and above, transmitted signals can be severely affected by tropospheric attenuation for substantial percentages of time, resulting in the degradation of the quality and of the availability of communication services. Fade Mitigation Techniques (FMTs) must be used to counteract these severe propagation impairments. In this thesis we explore the joint use of two of the most promising techniques, known as Reconfigurable Antenna and Adaptive Coding and Modulation, which up to now has been separately developed. Some of our accomplishments include, but are not limited to: a methodology to describe rain attenuation conditions for multiple users in large geographical areas, a tractable framework for the generation of correlated time series of rain attenuation for multiple receiving stations, the comparison of performance between fixed antenna systems and Reconfigurable Antenna system coupled with Adaptive Coding and Modulation
CHANNEL CAPACITY OF THE MACRO-DIVERSITY SC SYSTEM IN THE PRESENCE OF KAPPA-MU FADING AND CORRELATED SLOW GAMMA FADING
In this paper macrodiversity system consisting of two microdiversity SC (Selection Combiner) receivers and one macrodiversity SC receiver are analyzed. Independent κ-μ fading and correlated slow Gamma fading are present at the inputs to the microdiversity SC receivers. For this system model, analytical expression for the probability density of the signal at the output of the macrodiversity receiver SC, and the output capacity of the macrodiversity SC receiver are calculated. The obtained results are graphically presented to show the impact of Rician κ factor, the shading severity of the channel c, the number of clusters µ and correlation coefficient ρ on the probability density of the signal at the output of the macrodiversity system and channel capacity at the output of the macrodiversity system. Based on the obtained results it is possible to analyze the real behavior of the macrodiversity system in the presence of κ-μ fading
Optical Communication
Optical communication is very much useful in telecommunication systems, data processing and networking. It consists of a transmitter that encodes a message into an optical signal, a channel that carries the signal to its desired destination, and a receiver that reproduces the message from the received optical signal. It presents up to date results on communication systems, along with the explanations of their relevance, from leading researchers in this field. The chapters cover general concepts of optical communication, components, systems, networks, signal processing and MIMO systems. In recent years, optical components and other enhanced signal processing functions are also considered in depth for optical communications systems. The researcher has also concentrated on optical devices, networking, signal processing, and MIMO systems and other enhanced functions for optical communication. This book is targeted at research, development and design engineers from the teams in manufacturing industry, academia and telecommunication industries
Analysis of low-density parity-check codes on impulsive noise channels
PhD ThesisCommunication channels can severely degrade a signal, not only due to
fading effects but also interference in the form of impulsive noise. In
conventional communication systems, the additive noise at the receiver
is usually assumed to be Gaussian distributed. However, this assumption
is not always valid and examples of non-Gaussian distributed noise
include power line channels, underwater acoustic channels and manmade
interference. When designing a communication system it is useful
to know the theoretical performance in terms of bit-error probability
(BEP) on these types of channels. However, the effect of impulses on
the BEP performance has not been well studied, particularly when error correcting
codes are employed. Today, advanced error-correcting codes
with very long block lengths and iterative decoding algorithms, such as
Low-Density Parity-Check (LDPC) codes and turbo codes, are popular
due to their capacity-approaching performance. However, very long
codes are not always desirable, particularly in communications systems
where latency is a serious issue, such as in voice and video communication
between multiple users. This thesis focuses on the analysis of short
LDPC codes. Finite length analyses of LDPC codes have already been
presented for the additive white Gaussian noise channel in the literature,
but the analysis of short LDPC codes for channels that exhibit impulsive
noise has not been investigated.
The novel contributions in this thesis are presented in three sections.
First, uncoded and LDPC-coded BEP performance on channels exhibiting
impulsive noise modelled by symmetric -stable (S S) distributions
are examined. Different sub-optimal receivers are compared and a new
low-complexity receiver is proposed that achieves near-optimal performance.
Density evolution is then used to derive the threshold signal-tonoise
ratio (SNR) of LDPC codes that employ these receivers. In order
to accurately predict the waterfall performance of short LDPC codes, a
nite length analysis is proposed with the aid of the threshold SNRs of
LDPC codes and the derived uncoded BEPs for impulsive noise channels.
Second, to investigate the e ect of impulsive noise on wireless channels,
the analytic BEP on generalized fading channels with S S noise is derived.
However, it requires the evaluation of a double integral to obtain
the analytic BEP, so to reduce the computational cost, the Cauchy-
Gaussian mixture model and the asymptotic property of S S process
are used to derive upper bounds of the exact BEP. Two closed-form expressions
are derived to approximate the exact BEP on a Rayleigh fading
channel with S S noise. Then density evolution of different receivers is
derived for these channels to nd the asymptotic performance of LDPC
codes. Finally, the waterfall performance of LDPC codes is again estimated
for generalized fading channels with S S noise by utilizing the
derived uncoded BEP and threshold SNRs.
Finally, the addition of spatial diversity at the receiver is investigated.
Spatial diversity is an effective method to mitigate the effects of fading
and when used in conjunction with LDPC codes and can achieve
excellent error-correcting performance. Hence, the performance of conventional
linear diversity combining techniques are derived. Then the
SNRs of these linear combiners are compared and the relationship of
the noise power between different linear combiners is obtained. Nonlinear
detectors have been shown to achieve better performance than
linear combiners hence, optimal and sub-optimal detectors are also presented
and compared. A non-linear detector based on the bi-parameter
Cauchy-Gaussian mixture model is used and shows near-optimal performance
with a significant reduction in complexity when compared with
the optimal detector. Furthermore, we show how to apply density evolution
of LDPC codes for different combining techniques on these channels
and an estimation of the waterfall performance of LDPC codes is derived
that reduces the gap between simulated and asymptotic performance.
In conclusion, the work presented in this thesis provides a framework
to evaluate the performance of communication systems in the presence
of additive impulsive noise, with and without spatial diversity at the
receiver. For the first time, bounds on the BEP performance of LDPC
codes on channels with impulsive noise have been derived for optimal
and sub-optimal receivers, allowing other researchers to predict the performance
of LDPC codes in these type of environments without needing
to run lengthy computer simulations
Cooperative Radio Communications for Green Smart Environments
The demand for mobile connectivity is continuously increasing, and by 2020 Mobile and Wireless Communications will serve not only very dense populations of mobile phones and nomadic computers, but also the expected multiplicity of devices and sensors located in machines, vehicles, health systems and city infrastructures. Future Mobile Networks are then faced with many new scenarios and use cases, which will load the networks with different data traffic patterns, in new or shared spectrum bands, creating new specific requirements. This book addresses both the techniques to model, analyse and optimise the radio links and transmission systems in such scenarios, together with the most advanced radio access, resource management and mobile networking technologies. This text summarises the work performed by more than 500 researchers from more than 120 institutions in Europe, America and Asia, from both academia and industries, within the framework of the COST IC1004 Action on "Cooperative Radio Communications for Green and Smart Environments". The book will have appeal to graduates and researchers in the Radio Communications area, and also to engineers working in the Wireless industry. Topics discussed in this book include: • Radio waves propagation phenomena in diverse urban, indoor, vehicular and body environments• Measurements, characterization, and modelling of radio channels beyond 4G networks• Key issues in Vehicle (V2X) communication• Wireless Body Area Networks, including specific Radio Channel Models for WBANs• Energy efficiency and resource management enhancements in Radio Access Networks• Definitions and models for the virtualised and cloud RAN architectures• Advances on feasible indoor localization and tracking techniques• Recent findings and innovations in antenna systems for communications• Physical Layer Network Coding for next generation wireless systems• Methods and techniques for MIMO Over the Air (OTA) testin
MIMO transmission for 4G wireless communications
Tese de doutoramento. Engenharia Electrotécnica e de Computadores. Faculdade de Engenharia. Universidade do Porto. 200
State-of-the-art assessment of 5G mmWave communications
Deliverable D2.1 del proyecto 5GWirelessMain objective of the European 5Gwireless project, which is part of the H2020 Marie Slodowska-
Curie ITN (Innovative Training Networks) program resides in the training and involvement of young
researchers in the elaboration of future mobile communication networks, focusing on innovative
wireless technologies, heterogeneous network architectures, new topologies (including ultra-dense
deployments), and appropriate tools. The present Document D2.1 is the first deliverable of Work-
Package 2 (WP2) that is specifically devoted to the modeling of the millimeter-wave (mmWave)
propagation channels, and development of appropriate mmWave beamforming and signal
processing techniques. Deliver D2.1 gives a state-of-the-art on the mmWave channel measurement,
characterization and modeling; existing antenna array technologies, channel estimation and
precoding algorithms; proposed deployment and networking techniques; some performance
studies; as well as a review on the evaluation and analysis toolsPostprint (published version
Multi-Antenna Techniques for Next Generation Cellular Communications
Future cellular communications are expected to offer substantial improvements for the pre- existing mobile services with higher data rates and lower latency as well as pioneer new types of applications that must comply with strict demands from a wider range of user types. All of these tasks require utmost efficiency in the use of spectral resources. Deploying multiple antennas introduces an additional signal dimension to wireless data transmissions, which provides a significant alternative solution against the plateauing capacity issue of the limited available spectrum. Multi-antenna techniques and the associated key enabling technologies possess unquestionable potential to play a key role in the evolution of next generation cellular systems.
Spectral efficiency can be improved on downlink by concurrently serving multiple users with high-rate data connections on shared resources. In this thesis optimized multi-user multi-input multi-output (MIMO) transmissions are investigated on downlink from both filter design and resource allocation/assignment points of view. Regarding filter design, a joint baseband processing method is proposed specifically for high signal-to-noise ratio (SNR) conditions, where the necessary signaling overhead can be compensated for. Regarding resource scheduling, greedy- and genetic-based algorithms are proposed that demand lower complexity with large number of resource blocks relative to prior implementations.
Channel estimation techniques are investigated for massive MIMO technology. In case of channel reciprocity, this thesis proposes an overhead reduction scheme for the signaling of user channel state information (CSI) feedback during a relative antenna calibration. In addition, a multi-cell coordination method is proposed for subspace-based blind estimators on uplink, which can be implicitly translated to downlink CSI in the presence of ideal reciprocity. Regarding non-reciprocal channels, a novel estimation technique is proposed based on reconstructing full downlink CSI from a select number of dominant propagation paths. The proposed method offers drastic compressions in user feedback reports and requires much simpler downlink training processes.
Full-duplex technology can provide up to twice the spectral efficiency of conventional resource divisions. This thesis considers a full-duplex two-hop link with a MIMO relay and investigates mitigation techniques against the inherent loop-interference. Spatial-domain suppression schemes are developed for the optimization of full-duplex MIMO relaying in a coverage extension scenario on downlink. The proposed methods are demonstrated to generate data rates that closely approximate their global bounds
- …