Intrusion Detection for Cyber-Physical Attacks in Cyber-Manufacturing System

In the vision of Cyber-Manufacturing System (CMS) , the physical components such as products, machines, and tools are connected, identifiable and can communicate via the industrial network and the Internet. This integration of connectivity enables manufacturing systems access to computational resources, such as cloud computing, digital twin, and blockchain. The connected manufacturing systems are expected to be more efficient, sustainable and cost-effective. However, the extensive connectivity also increases the vulnerability of physical components. The attack surface of a connected manufacturing environment is greatly enlarged. Machines, products and tools could be targeted by cyber-physical attacks via the network. Among many emerging security concerns, this research focuses on the intrusion detection of cyber-physical attacks. The Intrusion Detection System (IDS) is used to monitor cyber-attacks in the computer security domain. For cyber-physical attacks, however, there is limited work. Currently, the IDS cannot effectively address cyber-physical attacks in manufacturing system: (i) the IDS takes time to reveal true alarms, sometimes over months; (ii) manufacturing production life-cycle is shorter than the detection period, which can cause physical consequences such as defective products and equipment damage; (iii) the increasing complexity of network will also make the detection period even longer. This gap leaves the cyber-physical attacks in manufacturing to cause issues like over-wearing, breakage, defects or any other changes that the original design didn’t intend. A review on the history of cyber-physical attacks, and available detection methods are presented. The detection methods are reviewed in terms of intrusion detection algorithms, and alert correlation methods. The attacks are further broken down into a taxonomy covering four dimensions with over thirty attack scenarios to comprehensively study and simulate cyber-physical attacks. A new intrusion detection and correlation method was proposed to address the cyber-physical attacks in CMS. The detection method incorporates IDS software in cyber domain and machine learning analysis in physical domain. The correlation relies on a new similarity-based cyber-physical alert correlation method. Four experimental case studies were used to validate the proposed method. Each case study focused on different aspects of correlation method performance. The experiments were conducted on a security-oriented manufacturing testbed established for this research at Syracuse University. The results showed the proposed intrusion detection and alert correlation method can effectively disclose unknown attack, known attack and attack interference that causes false alarms. In case study one, the alarm reduction rate reached 99.1%, with improvement of detection accuracy from 49.6% to 100%. The case studies also proved the proposed method can mitigate false alarms, detect attacks on multiple machines, and attacks from the supply chain. This work contributes to the security domain in cyber-physical manufacturing systems, with the focus on intrusion detection. The dataset collected during the experiments has been shared with the research community. The alert correlation methodology also contributes to cyber-physical systems, such as smart grid and connected vehicles, which requires enhanced security protection in today’s connected world

Risks associated with Logistics 4.0 and their minimization using Blockchain

Currently we are saying that we are at the dawn of the fourth revolution, which is marked by using cyber-physical systems and the Internet of Things. This is marked as Industry 4.0 (I4.0). With Industry 4.0 is also closely linked concept Logistics 4.0. The highly dynamic and uncertain logistic markets and huge logistic networks require new methods, products and services. The concept of the Internet of Things and Services (IoT&S), Big Data/Data Mining (DM), cloud computing, 3D printing, Blockchain and cyber physical system (CPS) etc. seem to be the probable technical solution for that. However, associated risks hamper its implementation and lack a comprehensive overview. In response, the paper proposes a framework of risks in the context of Logistics 4.0. They are here economic risks, that are associated e.g. with high or false investments. From a social perspective, risks the job losses, are considered too. Additionally, risks can be associated with technical risks, e.g. technical integration, information technology (IT)-related risks such as data security, and legal and political risks, such as for instance unsolved legal clarity in terms of data possession. It is therefore necessary to know the potential risks in the implementation process.Web of Science101857

Mitigating Insider Threat Risks in Cyber-physical Manufacturing Systems

Cyber-Physical Manufacturing System (CPMS)—a next generation manufacturing system—seamlessly integrates digital and physical domains via the internet or computer networks. It will enable drastic improvements in production flexibility, capacity, and cost-efficiency. However, enlarged connectivity and accessibility from the integration can yield unintended security concerns. The major concern arises from cyber-physical attacks, which can cause damages to the physical domain while attacks originate in the digital domain. Especially, such attacks can be performed by insiders easily but in a more critical manner: Insider Threats. Insiders can be defined as anyone who is or has been affiliated with a system. Insiders have knowledge and access authentications of the system\u27s properties, therefore, can perform more serious attacks than outsiders. Furthermore, it is hard to detect or prevent insider threats in CPMS in a timely manner, since they can easily bypass or incapacitate general defensive mechanisms of the system by exploiting their physical access, security clearance, and knowledge of the system vulnerabilities. This thesis seeks to address the above issues by developing an insider threat tolerant CPMS, enhanced by a service-oriented blockchain augmentation and conducting experiments & analysis. The aim of the research is to identify insider threat vulnerabilities and improve the security of CPMS. Blockchain\u27s unique distributed system approach is adopted to mitigate the insider threat risks in CPMS. However, the blockchain limits the system performance due to the arbitrary block generation time and block occurrence frequency. The service-oriented blockchain augmentation is providing physical and digital entities with the blockchain communication protocol through a service layer. In this way, multiple entities are integrated by the service layer, which enables the services with less arbitrary delays while retaining their strong security from the blockchain. Also, multiple independent service applications in the service layer can ensure the flexibility and productivity of the CPMS. To study the effectiveness of the blockchain augmentation against insider threats, two example models of the proposed system have been developed: Layer Image Auditing System (LIAS) and Secure Programmable Logic Controller (SPLC). Also, four case studies are designed and presented based on the two models and evaluated by an Insider Attack Scenario Assessment Framework. The framework investigates the system\u27s security vulnerabilities and practically evaluates the insider attack scenarios. The research contributes to the understanding of insider threats and blockchain implementations in CPMS by addressing key issues that have been identified in the literature. The issues are addressed by EBIS (Establish, Build, Identify, Simulation) validation process with numerical experiments and the results, which are in turn used towards mitigating insider threat risks in CPMS

Internet of robotic things : converging sensing/actuating, hypoconnectivity, artificial intelligence and IoT Platforms

The Internet of Things (IoT) concept is evolving rapidly and influencing newdevelopments in various application domains, such as the Internet of MobileThings (IoMT), Autonomous Internet of Things (A-IoT), Autonomous Systemof Things (ASoT), Internet of Autonomous Things (IoAT), Internetof Things Clouds (IoT-C) and the Internet of Robotic Things (IoRT) etc.that are progressing/advancing by using IoT technology. The IoT influencerepresents new development and deployment challenges in different areassuch as seamless platform integration, context based cognitive network integration,new mobile sensor/actuator network paradigms, things identification(addressing, naming in IoT) and dynamic things discoverability and manyothers. The IoRT represents new convergence challenges and their need to be addressed, in one side the programmability and the communication ofmultiple heterogeneous mobile/autonomous/robotic things for cooperating,their coordination, configuration, exchange of information, security, safetyand protection. Developments in IoT heterogeneous parallel processing/communication and dynamic systems based on parallelism and concurrencyrequire new ideas for integrating the intelligent “devices”, collaborativerobots (COBOTS), into IoT applications. Dynamic maintainability, selfhealing,self-repair of resources, changing resource state, (re-) configurationand context based IoT systems for service implementation and integrationwith IoT network service composition are of paramount importance whennew “cognitive devices” are becoming active participants in IoT applications.This chapter aims to be an overview of the IoRT concept, technologies,architectures and applications and to provide a comprehensive coverage offuture challenges, developments and applications