Structured modeling for VHDL synthesis

This report will describe a proposed modeling style for the use of the VHSIC Hardware Description Language (VHDL) in design synthesis. We will describe the operations and underlying assumptions of four design models currently understood and used in practice by designers: combinational logic, functional descriptions (involving clocked components such as counters), register transfer (data path) descriptions, and behavioral (instruction set or processor) designs. We will illustrate the various uses of the VHDL description styles (structural, dataflow and behavioral) to represent characteristics of each of these design models. Emphasis is placed on how VHDL constructs should be used in order to synthesize optimal designs

The Art of Fault Injection

Classical greek philosopher considered the foremost virtues to be temperance, justice, courage, and prudence. In this paper we relate these cardinal virtues to the correct methodological approaches that researchers should follow when setting up a fault injection experiment. With this work we try to understand where the "straightforward pathway" lies, in order to highlight those common methodological errors that deeply influence the coherency and the meaningfulness of fault injection experiments. Fault injection is like an art, where the success of the experiments depends on a very delicate balance between modeling, creativity, statistics, and patience

Behavioral synthesis from VHDL using structured modeling

This dissertation describes work in behavioral synthesis involving the development of a VHDL Synthesis System VSS which accepts a VHDL behavioral input specification and performs technology independent synthesis to generate a circuit netlist of generic components. The VHDL language is used for input and output descriptions. An intermediate representation which incorporates signal typing and component attributes simplifies compilation and facilitates design optimization.A Structured Modeling methodology has been developed to suggest standard VHDL modeling practices for synthesis. Structured modeling provides recommendations for the use of available VHDL description styles so that optimal designs will be synthesized.A design composed of generic components is synthesized from the input description through a process of Graph Compilation, Graph Criticism, and Design Compilation. Experiments were performed to demonstrate the effects of different modeling styles on the quality of the design produced by VSS. Several alternative VHDL models were examined for each benchmark, illustrating the improvements in design quality achieved when Structured Modeling guidelines were followed

Advanced information processing system: The Army fault tolerant architecture conceptual study. Volume 2: Army fault tolerant architecture design and analysis

Described here is the Army Fault Tolerant Architecture (AFTA) hardware architecture and components and the operating system. The architectural and operational theory of the AFTA Fault Tolerant Data Bus is discussed. The test and maintenance strategy developed for use in fielded AFTA installations is presented. An approach to be used in reducing the probability of AFTA failure due to common mode faults is described. Analytical models for AFTA performance, reliability, availability, life cycle cost, weight, power, and volume are developed. An approach is presented for using VHSIC Hardware Description Language (VHDL) to describe and design AFTA's developmental hardware. A plan is described for verifying and validating key AFTA concepts during the Dem/Val phase. Analytical models and partial mission requirements are used to generate AFTA configurations for the TF/TA/NOE and Ground Vehicle missions

Design and Implementation of Fault Tolerant Adders on Field Programmable Gate Arrays

Fault tolerance on various adder architectures implemented on Field Programmable Gate Arrays (FPGAs) is studied in this thesis. This involves developing error detection and correction techniques for the sparse Kogge-Stone adder and comparing it with Triple Modular Redundancy (TMR) techniques. Fault tolerance is implemented on a Kogge-Stone adder by taking advantage of the inherent redundancy in the carry tree. On a sparse Kogge-Stone adder, fault tolerance is realized by introducing additional ripple carry adders into the design. The implementation of this fault tolerance approach on the sparse Kogge-Stone adder is successfully completed and verified by introducing faults either on the ripple carry adder or in the carry tree. Two types of Xilinx FPGAs were used in this study: the Spartan 3E and Virtex 5. The fault tolerant adders were analyzed in terms of their delay and resource utilization as a function of the widths of the adders. The results of this research provide important design guidelines for the implementation of fault tolerant adders on FPGAs. The Triple Modular Redundancy-Ripple Carry Adder (TMR-RCA) is the most efficient approach for fault tolerant design on an FPGA in terms of its resources due to its simplicity and the ability to take advantage of the fast-carry chain. However, for very large bit widths, there are indications that the sparse Kogge-Stone adder offers superior performance over an RCA when implemented on an FPGA. Two fault tolerant approaches were implemented using a sparse Kogge-Stone architecture. First, a fault tolerant sparse Kogge-Stone adder is designed by taking advantage of the existing ripple carry adders in the architecture and adopting a similar approach to the TMR-RCA by inserting two additional ripple carry adders into the design. Second, a graceful degradation approach is implemented with the sparse Kogge-Stone adder. In this approach, a faulty block is permanently replaced with a spare block. As the spare block is initially used for fault checking, the fault tolerant capability of the circuit is degraded in order to continue fault-free operation. The adder delay is smaller for the graceful degradation approach by approximately 1 ns from measured results and 2 ns from the synthesis results independent of the bit widths when compared with the fault tolerant Kogge-Stone adder. However, the resource utilization is similar for both adders

Fault Injection for Embedded Microprocessor-based Systems

Microprocessor-based embedded systems are increasingly used to control safety-critical systems (e.g., air and railway traffic control, nuclear plant control, aircraft and car control). In this case, fault tolerance mechanisms are introduced at the hardware and software level. Debugging and verifying the correct design and implementation of these mechanisms ask for effective environments, and Fault Injection represents a viable solution for their implementation. In this paper we present a Fault Injection environment, named FlexFI, suitable to assess the correctness of the design and implementation of the hardware and software mechanisms existing in embedded microprocessor-based systems, and to compute the fault coverage they provide. The paper describes and analyzes different solutions for implementing the most critical modules, which differ in terms of cost, speed, and intrusiveness in the original system behavio

Enhancement of fault injection techniques based on the modification of VHDL code

Deep submicrometer devices are expected to be increasingly sensitive to physical faults. For this reason, fault-tolerance mechanisms are more and more required in VLSI circuits. So, validating their dependability is a prior concern in the design process. Fault injection techniques based on the use of hardware description languages offer important advantages with regard to other techniques. First, as this type of techniques can be applied during the design phase of the system, they permit reducing the time-to-market. Second, they present high controllability and reachability. Among the different techniques, those based on the use of saboteurs and mutants are especially attractive due to their high fault modeling capability. However, implementing automatically these techniques in a fault injection tool is difficult. Especially complex are the insertion of saboteurs and the generation of mutants. In this paper, we present new proposals to implement saboteurs and mutants for models in VHDL which are easy-to-automate, and whose philosophy can be generalized to other hardware description languages.Baraza Calvo, JC.; Gracia-Morán, J.; Blanc Clavero, S.; Gil Tomás, DA.; Gil Vicente, PJ. (2008). Enhancement of fault injection techniques based on the modification of VHDL code. IEEE Transactions on Very Large Scale Integration (VLSI) Systems. 16(6):693-706. doi:10.1109/TVLSI.2008.2000254S69370616

RT-level fast fault simulator

In this paper a new fast fault simulation technique is presented for calculation of fault propagation through HLPs (High Level Primitives). ROTDDs (Reduced Ordered Ternary Decision Diagrams) are used to describe HLP modules. The technique is implemented in the HTDD RT-level fault simulator. The simulator is evaluated with some ITC99 benchmarks. A hypothesis is proved that a test set coverage of physical failures can be anticipated with high accuracy when RTL fault model takes into account optimization strategies that are used in CAE system applied