Dynamics and Stability Analysis of IPMSM Position Sensorless Control for xEV Drive System

芝浦工業大学2019年

Hybrid sensorless control of PMSM in full speed range using HFI and back-EMF

The permanent magnet synchronous motors (PMSM) are more and more used because of their high performance compared with other AC motors. The present paper proposes a hybrid controller which consists of a high frequency injection estimator and a back-electromotive-force observer in full speed range for the sensorless control of PMSM. The aim objective of the study to prevent speed overshot in startup time of the motor and provides a better dynamic response in transient and permanent states using this structure. A hybrid algorithm is applied to realize a smooth transition from low to high speed. At standstill and very low speed region, HF injection technique is used to detect the rotor initial position. In this first step study, the position estimation is derived from a HF current injection by using only one filter. When the rotor speed goes up to a certain value where back-EMF can provide adequate information, a back-EMF observer will dominate. Thanks to this structure, the mechanical sensor can be engaged using the best estimates and the developed control method is fast, simple, and flexible. The effectiveness, superiority, and performance of the proposed control method and extensive simulation results are provided on a 1 kW permanent magnet synchronous motor drive, demonstrating the expected performances

Surface Permanent Magnet Synchronous Motors’ Passive Sensorless Control: A Review

Sensorless control of permanent magnet synchronous motors is nowadays used in many industrial, home and traction applications, as it allows the presence of a position sensor to be avoided with benefits for the cost and reliability of the drive. An estimation of the rotor position is required to perform the field-oriented control (FOC), which is the most common control scheme used for this type of motor. Many algorithms have been developed for this purpose, which use different techniques to derive the rotor angle from the stator voltages and currents. Among them, the so-called passive methods have gained increasing interest as they do not introduce additional losses and current distortion associated instead with algorithms based on the injection of high-frequency signals. The aim of this paper is to present a review of the main passive sensorless methods proposed in the technical literature over the last few years, analyzing their main features and principles of operation. An experimental comparison among the most promising passive sensorless algorithms is then reported, focusing on their performance in the low-speed operating region

Comparative Study of Sensorless Control Methods of PMSM Drives

Recently, permanent magnet synchronous motors (PMSMs) are increasingly used in high performance variable speed drives of many industrial applications. This is because the PMSM has many features, like high efficiency, compactness, high torque to inertia ratio, rapid dynamic response, simple modeling and control, and maintenance-free operation. In most applications, the presence of such a position sensor presents several disadvantages, such as reduced reliability, susceptibility to noise, additional cost and weight and increased complexity of the drive system. For these reasons, the development of alternative indirect methods for speed and position control becomes an important research topic. Many advantages of sensorless control such as reduced hardware complexity, low cost, reduced size, cable elimination, increased noise immunity, increased reliability and decreased maintenance. The key problem in sensorless vector control of ac drives is the accurate dynamic estimation of the stator flux vector over a wide speed range using only terminal variables (currents and voltages). The difficulty comprises state estimation at very low speeds where the fundamental excitation is low and the observer performance tends to be poor. The reasons are the observer sensitivity to model parameter variations, unmodeled nonlinearities and disturbances, limited accuracy of acquisition signals, drifts, and dc offsets. Poor speed estimation at low speed is attributed to data acquisition errors, voltage distortion due the PWM inverter and stator resistance drop which degrading the performance of sensorless drive. Moreover, the noises of system and measurements are considered other main problems. This paper presents a comprehensive study of the different methods of speed and position estimations for sensorless PMSM drives. A deep insight of the advantages and disadvantages of each method is investigated. Furthermore, the difficulties faced sensorless PMSM drives at low speeds as well as the reasons are highly demonstrated. Keywords: permanent magnet, synchronous motor, sensorless control, speed estimation, position estimation, parameter adaptation

Some Permanent Magnet Synchronous Motor (PMSM) Sensorless Control Methods based on Operation Speed Area

This paper compares some sensorless Permanent Magnet Synchronous Motor (PMSM) controls for driving an electric vehicle in terms of operating speed. Sensorless control is a type of control method in which sensors, such as speed and position sensors, are not used to measure controlled variables.  The controlled variable value is estimated from the stator current measurement. Sensorless control performance is not as good as a sensor-based system. This paper aims are to recommend a control method for the PMSM sensorless controls that would be used to drive an electric vehicle. The methods that we will discuss are divided into four categories based on the operation speed area.  They are a startup, low speed, high speed, and low and high-speed areas. The low and high-speed area will be divided into with and without switching.  If PMSM more work at high speed, the most speed area that is used, we prefer to choose the method that works at high speed, that is, the modification or combination of two or more conventional methods

Unaprijeđena metoda estimacije položaja zasnovana na upotrebi dvodimenzionalnog polja za ažuriranje parametara

The paper presents results of studies on the position estimation for the permanent magnet synchronous motor (PMSM) drive using gain scheduling technique for tuning the observer\u27s parameters. It allows a good estimation accuracy in wide range of working point change. Such observer with multi integral correction function improves the performance, but need to modify its parameters according to its speed and load. Novelty is the use of a two-dimensional gain scheduling technique and the use in the sensorless drive, where traditional solution is simple one-input scheduling variable - mainly on drives with position sensors. The look-up table output is processed using bilinear interpolation. Position observer is based on back EMF estimation. It uses predefined reference matrices of parameters, which are interpolated and depend on drive\u27s operating point.U radu su predstavljeni rezultati studija vezanih za estimaciju položaja sinkronog motora s permanentnim magnetima (PMSM) uz korištenje regulatora s podesivim pojačanjem za adaptaciju parametara estimatora. Metoda pokazuje dobru točnost estimacije u širokom rasponu radnog područja. Ovakav estimator s više integracijskih korekcijskih funkcija poboljšava performanse, ali i zahtijeva adaptaciju parametara ovisno o brzini i teretu. Novost predstavlja korištenje dvodimenzionalnog podešavanja pojačanja regulatora te primjena u bezsenzorskom upravljanju elektromotornim pogonom, gdje se tradicionalno koristi jednostavno ažuriranje jedne varijable - prije svega kod elektromotornih pogona sa senzorom za poziciju. Pregledna tablica izlaza koristi se uz bilinearnu interpolaciju. Estimator položaja zasnovan je na estimaciji protuelektromotorne sile. Estimator koristi unaprijed određene referentne matrice parametara koje se interpoliraju te ovise o radnoj točki

On extended Kalman filters with augmented state vectors for the stator flux estimation in SPMSMs

The demand for highly dynamic electrical drives, characterized by high quality torque control, in a wide variety of applications has grown tremendously during the past decades. Direct torque control (DTC) for permanent magnet synchronous motors (PMSM) can provide this accurate and fast torque control. When applying DTC the change of the stator flux linkage vector is controlled, based on torque and flux errors. As such the estimation of the stator flux linkage is essential. In the literature several possible solutions for the estimation of the stator flux linkage are proposed. In order to overcome problems associated with the integration of the back-emf, the use of state observers has been advocated in the literature. Several types of state observers have been conceived and implemented for PMSMs, especially the Extended Kalman Filter (EKF) has received much attention. In most reported applications however the EKF is only used to estimate the speed and rotor position of the PMSM in order to realize field oriented current control in a rotor reference frame. Far fewer publications mention the use of an EKF to estimate the stator flux linkage vector in order to apply DTC. Still the performance of the EKF in the estimation of the stator flux linkage vector has not yet been thoroughly investigated. In this paper the performance of the EKF for stator flux linkage is studied and simulated. The possibilities to improve the estimation by augmenting the state vector and the consequences of these alterations are explored. Important practical aspects for FPGA implementation are discussed