4 research outputs found

    Caracterización de un Sistema GPS RTK de Bajo Costo

    Get PDF
    En las últimas décadas la comunidad robótica ha adoptado cada vez más el uso de sensores GPS-RTK para estimar de forma precisa la localización de robots móviles en ambientes exteriores. En este trabajo se presenta la caracterización de un sistema GPS-RTK de bajo costo. A partir del montaje de las unidades base y móvil se adquirieron datos de posición corregidos en tiempo real por el mismo sistema RTK bajo diferentes disposiciones físicas, velocidades de actualización y condiciones ambientales presentándose posteriormente un estudio estadístico de los resultados obtenidos

    PERFORMANCE EVALUATION OF OUTDOOR NAVIGATION ALGORITHMS FOR THE WHEELCHAIR ROBOT

    Get PDF
    This paper proposes navigation algorithms for mobile robot through the odometry approach. The proposed algorithms include the odometry-based algorithm which uses only odometry calculated from robot motions, and the visual-assisted algorithm that applies visual data to assist in the navigation. The visual-assisted algorithm takes the convolutional neural network with regression setups in addition to the odometry. Goal of the visual-assisted algorithm help localize the robot in navigation by recognizing the scene using camera images. Navigation algorithms are tested for outdoor navigation tasks in the specified route. The experiments consist of two situations for navigation on the same route: with obstacles and without obstacles. Experimental results state that the navigation using only odometry is sufficient for navigation in the experimental environments. The visual-assisted algorithm is proved to be an interesting alternative way of improvement for odometry, in which a large number of improvements and optimizations for visual techniques of outdoor robot navigation are still available to be studied and implemented further

    Embedded System Design of Robot Control Architectures for Unmanned Agricultural Ground Vehicles

    Get PDF
    Engineering technology has matured to the extent where accompanying methods for unmanned field management is now becoming a technologically achievable and economically viable solution to agricultural tasks that have been traditionally performed by humans or human operated machines. Additionally, the rapidly increasing world population and the daunting burden it places on farmers in regards to the food production and crop yield demands, only makes such advancements in the agriculture industry all the more imperative. Consequently, the sector is beginning to observe a noticeable shift, where there exist a number of scalable infrastructural changes that are in the process of slowly being implemented onto the modular machinery design of agricultural equipment. This work is being pursued in effort to provide firmware descriptions and hardware architectures that integrate cutting edge technology onto the embedded control architectures of agricultural machinery designs to assist in achieving the end goal of complete and reliable unmanned agricultural automation. In this thesis, various types of autonomous control algorithms integrated with obstacle avoidance or guidance schemes, were implemented onto controller area network (CAN) based distributive real-time systems (DRTSs) in form of the two unmanned agricultural ground vehicles (UAGVs). Both vehicles are tailored to different applications in the agriculture domain as they both leverage state-of-the-art sensors and modules to attain the end objective of complete autonomy to allow for the automation of various types of agricultural related tasks. The further development of the embedded system design of these machines called for the developed firmware and hardware to be implemented onto both an event triggered and time triggered CAN bus control architecture as each robot employed its own separate embedded control scheme. For the first UAGV, a multiple GPS waypoint navigation scheme is derived, developed, and evaluated to yield a fully controllable GPS-driven vehicle. Additionally, obstacle detection and avoidance capabilities were also implemented onto the vehicle to serve as a safety layer for the robot control architecture, giving the ground vehicle the ability to reliability detect and navigate around any obstacles that may happen to be in the vicinity of the assigned path. The second UAGV was a smaller robot designed for field navigation applications. For this robot, a fully autonomous sensor based algorithm was proposed and implemented onto the machine. It is demonstrated that the utilization and implementation of laser, LIDAR, and IMU sensors onto a mobile robot platform allowed for the realization of a fully autonomous non-GPS sensor based algorithm to be employed for field navigation. The developed algorithm can serve as a viable solution for the application of microclimate sensing in a field. Advisors: A. John Boye and Santosh Pitl

    Embedded System Design of Robot Control Architectures for Unmanned Agricultural Ground Vehicles

    Get PDF
    Engineering technology has matured to the extent where accompanying methods for unmanned field management is now becoming a technologically achievable and economically viable solution to agricultural tasks that have been traditionally performed by humans or human operated machines. Additionally, the rapidly increasing world population and the daunting burden it places on farmers in regards to the food production and crop yield demands, only makes such advancements in the agriculture industry all the more imperative. Consequently, the sector is beginning to observe a noticeable shift, where there exist a number of scalable infrastructural changes that are in the process of slowly being implemented onto the modular machinery design of agricultural equipment. This work is being pursued in effort to provide firmware descriptions and hardware architectures that integrate cutting edge technology onto the embedded control architectures of agricultural machinery designs to assist in achieving the end goal of complete and reliable unmanned agricultural automation. In this thesis, various types of autonomous control algorithms integrated with obstacle avoidance or guidance schemes, were implemented onto controller area network (CAN) based distributive real-time systems (DRTSs) in form of the two unmanned agricultural ground vehicles (UAGVs). Both vehicles are tailored to different applications in the agriculture domain as they both leverage state-of-the-art sensors and modules to attain the end objective of complete autonomy to allow for the automation of various types of agricultural related tasks. The further development of the embedded system design of these machines called for the developed firmware and hardware to be implemented onto both an event triggered and time triggered CAN bus control architecture as each robot employed its own separate embedded control scheme. For the first UAGV, a multiple GPS waypoint navigation scheme is derived, developed, and evaluated to yield a fully controllable GPS-driven vehicle. Additionally, obstacle detection and avoidance capabilities were also implemented onto the vehicle to serve as a safety layer for the robot control architecture, giving the ground vehicle the ability to reliability detect and navigate around any obstacles that may happen to be in the vicinity of the assigned path. The second UAGV was a smaller robot designed for field navigation applications. For this robot, a fully autonomous sensor based algorithm was proposed and implemented onto the machine. It is demonstrated that the utilization and implementation of laser, LIDAR, and IMU sensors onto a mobile robot platform allowed for the realization of a fully autonomous non-GPS sensor based algorithm to be employed for field navigation. The developed algorithm can serve as a viable solution for the application of microclimate sensing in a field. Advisors: A. John Boye and Santosh Pitl
    corecore