Reflectance Intensity Assisted Automatic and Accurate Extrinsic Calibration of 3D LiDAR and Panoramic Camera Using a Printed Chessboard

This paper presents a novel method for fully automatic and convenient extrinsic calibration of a 3D LiDAR and a panoramic camera with a normally printed chessboard. The proposed method is based on the 3D corner estimation of the chessboard from the sparse point cloud generated by one frame scan of the LiDAR. To estimate the corners, we formulate a full-scale model of the chessboard and fit it to the segmented 3D points of the chessboard. The model is fitted by optimizing the cost function under constraints of correlation between the reflectance intensity of laser and the color of the chessboard's patterns. Powell's method is introduced for resolving the discontinuity problem in optimization. The corners of the fitted model are considered as the 3D corners of the chessboard. Once the corners of the chessboard in the 3D point cloud are estimated, the extrinsic calibration of the two sensors is converted to a 3D-2D matching problem. The corresponding 3D-2D points are used to calculate the absolute pose of the two sensors with Unified Perspective-n-Point (UPnP). Further, the calculated parameters are regarded as initial values and are refined using the Levenberg-Marquardt method. The performance of the proposed corner detection method from the 3D point cloud is evaluated using simulations. The results of experiments, conducted on a Velodyne HDL-32e LiDAR and a Ladybug3 camera under the proposed re-projection error metric, qualitatively and quantitatively demonstrate the accuracy and stability of the final extrinsic calibration parameters.Comment: 20 pages, submitted to the journal of Remote Sensin

A mask-based approach for the geometric calibration of thermal-infrared cameras

Accurate and efficient thermal-infrared (IR) camera calibration is important for advancing computer vision research within the thermal modality. This paper presents an approach for geometrically calibrating individual and multiple cameras in both the thermal and visible modalities. The proposed technique can be used to correct for lens distortion and to simultaneously reference both visible and thermal-IR cameras to a single coordinate frame. The most popular existing approach for the geometric calibration of thermal cameras uses a printed chessboard heated by a flood lamp and is comparatively inaccurate and difficult to execute. Additionally, software toolkits provided for calibration either are unsuitable for this task or require substantial manual intervention. A new geometric mask with high thermal contrast and not requiring a flood lamp is presented as an alternative calibration pattern. Calibration points on the pattern are then accurately located using a clustering-based algorithm which utilizes the maximally stable extremal region detector. This algorithm is integrated into an automatic end-to-end system for calibrating single or multiple cameras. The evaluation shows that using the proposed mask achieves a mean reprojection error up to 78% lower than that using a heated chessboard. The effectiveness of the approach is further demonstrated by using it to calibrate two multiple-camera multiple-modality setups. Source code and binaries for the developed software are provided on the project Web site

3D Scanning System for Automatic High-Resolution Plant Phenotyping

Thin leaves, fine stems, self-occlusion, non-rigid and slowly changing structures make plants difficult for three-dimensional (3D) scanning and reconstruction -- two critical steps in automated visual phenotyping. Many current solutions such as laser scanning, structured light, and multiview stereo can struggle to acquire usable 3D models because of limitations in scanning resolution and calibration accuracy. In response, we have developed a fast, low-cost, 3D scanning platform to image plants on a rotating stage with two tilting DSLR cameras centred on the plant. This uses new methods of camera calibration and background removal to achieve high-accuracy 3D reconstruction. We assessed the system's accuracy using a 3D visual hull reconstruction algorithm applied on 2 plastic models of dicotyledonous plants, 2 sorghum plants and 2 wheat plants across different sets of tilt angles. Scan times ranged from 3 minutes (to capture 72 images using 2 tilt angles), to 30 minutes (to capture 360 images using 10 tilt angles). The leaf lengths, widths, areas and perimeters of the plastic models were measured manually and compared to measurements from the scanning system: results were within 3-4% of each other. The 3D reconstructions obtained with the scanning system show excellent geometric agreement with all six plant specimens, even plants with thin leaves and fine stems.Comment: 8 papes, DICTA 201

Automatic Detection of Calibration Grids in Time-of-Flight Images

It is convenient to calibrate time-of-flight cameras by established methods, using images of a chequerboard pattern. The low resolution of the amplitude image, however, makes it difficult to detect the board reliably. Heuristic detection methods, based on connected image-components, perform very poorly on this data. An alternative, geometrically-principled method is introduced here, based on the Hough transform. The projection of a chequerboard is represented by two pencils of lines, which are identified as oriented clusters in the gradient-data of the image. A projective Hough transform is applied to each of the two clusters, in axis-aligned coordinates. The range of each transform is properly bounded, because the corresponding gradient vectors are approximately parallel. Each of the two transforms contains a series of collinear peaks; one for every line in the given pencil. This pattern is easily detected, by sweeping a dual line through the transform. The proposed Hough-based method is compared to the standard OpenCV detection routine, by application to several hundred time-of-flight images. It is shown that the new method detects significantly more calibration boards, over a greater variety of poses, without any overall loss of accuracy. This conclusion is based on an analysis of both geometric and photometric error.Comment: 11 pages, 11 figures, 1 tabl

Calibração multi-modal de sensores a bordo do ATLASCAR2

Complex robot systems have several sensors with different modalities. In order to estimate the pose of these various multi-modal sensors, some works propose sequential pairwise calibrations, which have some inherent problems. ATLASCAR2 is an intelligent vehicle with several sensors of different modalities. The main goal of this work is to calibrate all sensors on board the ATLASCAR2. A ROS based interactive and semi-automatic approach, that works for any robot system, even the most complex ones, was developed. After the step of identifying which geometric transformations, between all robot description, should be estimated and collecting the detected data from each sensor, a least-squares optimization occurs to enhance the position and orientation of each one of the robot sensors. Results show that the four sensors simultaneous calibration is as good as the pairwise procedures used with the standard calibration tools, such as the OpenCV ones. In that way, the proposed solution brings a novel and advantageous methodology, since it fits to any complex robot system and calibrates all sensors at the same time.Os mais complexos sistemas robóticos possuem vários sensors de diferentes modalidades. Com o objetivo de se estimar a posição e orientação destes vários sensors multi-modais, existem alguns trabalhos que propõem calibrações sequenciais par a par: calibrações essas com alguns problemas inerentes. ATLASCAR2 é um veículo inteligente com vários sensores de diferentes modalidades. O objetivo principal deste projeto é calibrar todos os sensors a bordo do ATLASCAR2. Foi desenvolvida uma abordagem interativa e semi-automática, que funciona para qualquer robô em ROS, mesmo os mais complexos. Depois da etapa de identificação de quais as transformações geométricas, de entre toda a descrição do robô, devem ser estimadas e da coleção da informação recolhida por cada sensor, optimiza-se, através do método dos mínimos quadrados, os parâmetros de posição e orientação de cada um dos sensores do robô. Os resultados mostram que a calibração simultânea dos quatro sensores é tão boa quanto os procedimentos par a par usados pelas ferramentas de calibração padrão, como as do OpenCV. Assim sendo, a solução proposta apresenta uma nova e vantajosa metodologia, uma vez que se adequa a qualquer sistema robótico complexo e que calibra todos os seus sensors ao mesmo tempo.Mestrado em Engenharia Mecânic

RCDN -- Robust X-Corner Detection Algorithm based on Advanced CNN Model

Accurate detection and localization of X-corner on both planar and non-planar patterns is a core step in robotics and machine vision. However, previous works could not make a good balance between accuracy and robustness, which are both crucial criteria to evaluate the detectors performance. To address this problem, in this paper we present a novel detection algorithm which can maintain high sub-pixel precision on inputs under multiple interference, such as lens distortion, extreme poses and noise. The whole algorithm, adopting a coarse-to-fine strategy, contains a X-corner detection network and three post-processing techniques to distinguish the correct corner candidates, as well as a mixed sub-pixel refinement technique and an improved region growth strategy to recover the checkerboard pattern partially visible or occluded automatically. Evaluations on real and synthetic images indicate that the presented algorithm has the higher detection rate, sub-pixel accuracy and robustness than other commonly used methods. Finally, experiments of camera calibration and pose estimation verify it can also get smaller re-projection error in quantitative comparisons to the state-of-the-art.Comment: 15 pages, 8 figures and 4 tables. Unpublished further research and experiments of Checkerboard corner detection network CCDN (arXiv:2302.05097) and application exploration for robust camera calibration (https://ieeexplore.ieee.org/abstract/document/9428389

Advanced Calibration of Automotive Augmented Reality Head-Up Displays = Erweiterte Kalibrierung von Automotiven Augmented Reality-Head-Up-Displays

In dieser Arbeit werden fortschrittliche Kalibrierungsmethoden für Augmented-Reality-Head-up-Displays (AR-HUDs) in Kraftfahrzeugen vorgestellt, die auf parametrischen perspektivischen Projektionen und nichtparametrischen Verzerrungsmodellen basieren. Die AR-HUD-Kalibrierung ist wichtig, um virtuelle Objekte in relevanten Anwendungen wie z.B. Navigationssystemen oder Parkvorgängen korrekt zu platzieren. Obwohl es im Stand der Technik einige nützliche Ansätze für dieses Problem gibt, verfolgt diese Dissertation das Ziel, fortschrittlichere und dennoch weniger komplizierte Ansätze zu entwickeln. Als Voraussetzung für die Kalibrierung haben wir mehrere relevante Koordinatensysteme definiert, darunter die dreidimensionale (3D) Welt, den Ansichtspunkt-Raum, den HUD-Sichtfeld-Raum (HUD-FOV) und den zweidimensionalen (2D) virtuellen Bildraum. Wir beschreiben die Projektion der Bilder von einem AR-HUD-Projektor in Richtung der Augen des Fahrers als ein ansichtsabhängiges Lochkameramodell, das aus intrinsischen und extrinsischen Matrizen besteht. Unter dieser Annahme schätzen wir zunächst die intrinsische Matrix unter Verwendung der Grenzen des HUD-Sichtbereichs. Als nächstes kalibrieren wir die extrinsischen Matrizen an verschiedenen Blickpunkten innerhalb einer ausgewählten "Eyebox" unter Berücksichtigung der sich ändernden Augenpositionen des Fahrers. Die 3D-Positionen dieser Blickpunkte werden von einer Fahrerkamera verfolgt. Für jeden einzelnen Blickpunkt erhalten wir eine Gruppe von 2D-3D-Korrespondenzen zwischen einer Menge Punkten im virtuellen Bildraum und ihren übereinstimmenden Kontrollpunkten vor der Windschutzscheibe. Sobald diese Korrespondenzen verfügbar sind, berechnen wir die extrinsische Matrix am entsprechenden Betrachtungspunkt. Durch Vergleichen der neu projizierten und realen Pixelpositionen dieser virtuellen Punkte erhalten wir eine 2D-Verteilung von Bias-Vektoren, mit denen wir Warping-Karten rekonstruieren, welche die Informationen über die Bildverzerrung enthalten. Für die Vollständigkeit wiederholen wir die obigen extrinsischen Kalibrierungsverfahren an allen ausgewählten Betrachtungspunkten. Mit den kalibrierten extrinsischen Parametern stellen wir die Betrachtungspunkte wieder her im Weltkoordinatensystem. Da wir diese Punkte gleichzeitig im Raum der Fahrerkamera verfolgen, kalibrieren wir weiter die Transformation von der Fahrerkamera in den Weltraum unter Verwendung dieser 3D-3D-Korrespondenzen. Um mit nicht teilnehmenden Betrachtungspunkten innerhalb der Eyebox umzugehen, erhalten wir ihre extrinsischen Parameter und Warping-Karten durch nichtparametrische Interpolationen. Unsere Kombination aus parametrischen und nichtparametrischen Modellen übertrifft den Stand der Technik hinsichtlich der Zielkomplexität sowie Zeiteffizienz, während wir eine vergleichbare Kalibrierungsgenauigkeit beibehalten. Bei allen unseren Kalibrierungsschemen liegen die Projektionsfehler in der Auswertungsphase bei einer Entfernung von 7,5 Metern innerhalb weniger Millimeter, was einer Winkelgenauigkeit von ca. 2 Bogenminuten entspricht, was nahe am Auflösungvermögen des Auges liegt