Reset controller design based on error minimization for a lane change maneuver

An intelligent vehicle must face a wide variety of situations ranging from safe and comfortable to more aggressive ones. Smooth maneuvers are adequately addressed by means of linear control, whereas more aggressive maneuvers are tackled by nonlinear techniques. Likewise, there exist intermediate scenarios where the required responses are smooth but constrained in some way (rise time, settling time, overshoot). Due to the existence of the fundamental linear limitations, which impose restrictions on the attainable time-domain and frequency-domain performance, linear systems cannot provide smoothness while operating in compliance with the previous restrictions. For this reason, this article aims to explore the effects of reset control on the alleviation of these limitations for a lane change maneuver under a set of demanding design conditions to guarantee a suitable ride quality and a swift response. To this end, several reset strategies are considered, determining the best reset condition to apply as well as the magnitude thereto. Concerning the reset condition that triggers the reset action, three strategies are considered: zero crossing of the controller input, fixed reset band and variable reset band. As far as the magnitude of the reset action is concerned, a full-reset technique is compared to a Lyapunov-based error minimization method to calculate the optimal reset percentage. The base linear controller subject to the reset action is searched via genetic algorithms. The proposed controllers are validated by means of CarSim.Agencia Estatal de Investigación | Ref. DPI2016-79278-C2-2-

A Human Driver Model for Autonomous Lane Changing in Highways: Predictive Fuzzy Markov Game Driving Strategy

This study presents an integrated hybrid solution to mandatory lane changing problem to deal with accident avoidance by choosing a safe gap in highway driving. To manage this, a comprehensive treatment to a lane change active safety design is proposed from dynamics, control, and decision making aspects. My effort first goes on driver behaviors and relating human reasoning of threat in driving for modeling a decision making strategy. It consists of two main parts; threat assessment in traffic participants, (TV s) states, and decision making. The first part utilizes an complementary threat assessment of TV s, relative to the subject vehicle, SV , by evaluating the traffic quantities. Then I propose a decision strategy, which is based on Markov decision processes (MDPs) that abstract the traffic environment with a set of actions, transition probabilities, and corresponding utility rewards. Further, the interactions of the TV s are employed to set up a real traffic condition by using game theoretic approach. The question to be addressed here is that how an autonomous vehicle optimally interacts with the surrounding vehicles for a gap selection so that more effective performance of the overall traffic flow can be captured. Finding a safe gap is performed via maximizing an objective function among several candidates. A future prediction engine thus is embedded in the design, which simulates and seeks for a solution such that the objective function is maximized at each time step over a horizon. The combined system therefore forms a predictive fuzzy Markov game (FMG) since it is to perform a predictive interactive driving strategy to avoid accidents for a given traffic environment. I show the effect of interactions in decision making process by proposing both cooperative and non-cooperative Markov game strategies for enhanced traffic safety and mobility. This level is called the higher level controller. I further focus on generating a driver controller to complement the automated car’s safe driving. To compute this, model predictive controller (MPC) is utilized. The success of the combined decision process and trajectory generation is evaluated with a set of different traffic scenarios in dSPACE virtual driving environment. Next, I consider designing an active front steering (AFS) and direct yaw moment control (DYC) as the lower level controller that performs a lane change task with enhanced handling performance in the presence of varying front and rear cornering stiffnesses. I propose a new control scheme that integrates active front steering and the direct yaw moment control to enhance the vehicle handling and stability. I obtain the nonlinear tire forces with Pacejka model, and convert the nonlinear tire stiffnesses to parameter space to design a linear parameter varying controller (LPV) for combined AFS and DYC to perform a commanded lane change task. Further, the nonlinear vehicle lateral dynamics is modeled with Takagi-Sugeno (T-S) framework. A state-feedback fuzzy H∞ controller is designed for both stability and tracking reference. Simulation study confirms that the performance of the proposed methods is quite satisfactory

A Human Driver Model for Autonomous Lane Changing in Highways: Predictive Fuzzy Markov Game Driving Strategy

This study presents an integrated hybrid solution to mandatory lane changing problem to deal with accident avoidance by choosing a safe gap in highway driving. To manage this, a comprehensive treatment to a lane change active safety design is proposed from dynamics, control, and decision making aspects. My effort first goes on driver behaviors and relating human reasoning of threat in driving for modeling a decision making strategy. It consists of two main parts; threat assessment in traffic participants, (TV s) states, and decision making. The first part utilizes an complementary threat assessment of TV s, relative to the subject vehicle, SV , by evaluating the traffic quantities. Then I propose a decision strategy, which is based on Markov decision processes (MDPs) that abstract the traffic environment with a set of actions, transition probabilities, and corresponding utility rewards. Further, the interactions of the TV s are employed to set up a real traffic condition by using game theoretic approach. The question to be addressed here is that how an autonomous vehicle optimally interacts with the surrounding vehicles for a gap selection so that more effective performance of the overall traffic flow can be captured. Finding a safe gap is performed via maximizing an objective function among several candidates. A future prediction engine thus is embedded in the design, which simulates and seeks for a solution such that the objective function is maximized at each time step over a horizon. The combined system therefore forms a predictive fuzzy Markov game (FMG) since it is to perform a predictive interactive driving strategy to avoid accidents for a given traffic environment. I show the effect of interactions in decision making process by proposing both cooperative and non-cooperative Markov game strategies for enhanced traffic safety and mobility. This level is called the higher level controller. I further focus on generating a driver controller to complement the automated car’s safe driving. To compute this, model predictive controller (MPC) is utilized. The success of the combined decision process and trajectory generation is evaluated with a set of different traffic scenarios in dSPACE virtual driving environment. Next, I consider designing an active front steering (AFS) and direct yaw moment control (DYC) as the lower level controller that performs a lane change task with enhanced handling performance in the presence of varying front and rear cornering stiffnesses. I propose a new control scheme that integrates active front steering and the direct yaw moment control to enhance the vehicle handling and stability. I obtain the nonlinear tire forces with Pacejka model, and convert the nonlinear tire stiffnesses to parameter space to design a linear parameter varying controller (LPV) for combined AFS and DYC to perform a commanded lane change task. Further, the nonlinear vehicle lateral dynamics is modeled with Takagi-Sugeno (T-S) framework. A state-feedback fuzzy H∞ controller is designed for both stability and tracking reference. Simulation study confirms that the performance of the proposed methods is quite satisfactory

Feasible, Robust and Reliable Automation and Control for Autonomous Systems

The Special Issue book focuses on highlighting current research and developments in the automation and control field for autonomous systems as well as showcasing state-of-the-art control strategy approaches for autonomous platforms. The book is co-edited by distinguished international control system experts currently based in Sweden, the United States of America, and the United Kingdom, with contributions from reputable researchers from China, Austria, France, the United States of America, Poland, and Hungary, among many others. The editors believe the ten articles published within this Special Issue will be highly appealing to control-systems-related researchers in applications typified in the fields of ground, aerial, maritime vehicles, and robotics as well as industrial audiences

Shared control strategies for automated vehicles

188 p.Los vehículos automatizados (AVs) han surgido como una solución tecnológica para compensar las deficiencias de la conducción manual. Sin embargo, esta tecnología aún no está lo suficientemente madura para reemplazar completamente al conductor, ya que esto plantea problemas técnicos, sociales y legales. Sin embargo, los accidentes siguen ocurriendo y se necesitan nuevas soluciones tecnológicas para mejorar la seguridad vial. En este contexto, el enfoque de control compartido, en el que el conductor permanece en el bucle de control y, junto con la automatización, forma un equipo bien coordinado que colabora continuamente en los niveles táctico y de control de la tarea de conducción, es una solución prometedora para mejorar el rendimiento de la conducción manual aprovechando los últimos avances en tecnología de conducción automatizada. Esta estrategia tiene como objetivo promover el desarrollo de sistemas de asistencia al conductor más avanzados y con mayor grade de cooperatición en comparación con los disponibles en los vehículos comerciales. En este sentido, los vehículos automatizados serán los supervisores que necesitan los conductores, y no al revés. La presente tesis aborda en profundidad el tema del control compartido en vehículos automatizados, tanto desde una perspectiva teórica como práctica. En primer lugar, se proporciona una revisión exhaustiva del estado del arte para brindar una descripción general de los conceptos y aplicaciones en los que los investigadores han estado trabajando durante lasúltimas dos décadas. Luego, se adopta un enfoque práctico mediante el desarrollo de un controlador para ayudar al conductor en el control lateral del vehículo. Este controlador y su sistema de toma de decisiones asociado (Módulo de Arbitraje) se integrarán en el marco general de conducción automatizada y se validarán en una plataforma de simulación con conductores reales. Finalmente, el controlador desarrollado se aplica a dos sistemas. El primero para asistir a un conductor distraído y el otro en la implementación de una función de seguridad para realizar maniobras de adelantamiento en carreteras de doble sentido. Al finalizar, se presentan las conclusiones más relevantes y las perspectivas de investigación futuras para el control compartido en la conducción automatizada

Advanced Control and Estimation Concepts, and New Hardware Topologies for Future Mobility

According to the National Research Council, the use of embedded systems throughout society could well overtake previous milestones in the information revolution. Mechatronics is the synergistic combination of electronic, mechanical engineering, controls, software and systems engineering in the design of processes and products. Mechatronic systems put “intelligence” into physical systems. Embedded sensors/actuators/processors are integral parts of mechatronic systems. The implementation of mechatronic systems is consistently on the rise. However, manufacturers are working hard to reduce the implementation cost of these systems while trying avoid compromising product quality. One way of addressing these conflicting objectives is through new automatic control methods, virtual sensing/estimation, and new innovative hardware topologies

Robust Operation and Control Synthesis of Autonomous Mobile Rack Vehicle in the Smart Warehouse

Nowadays, with the development of science and technology, to manage the inventory in the warehouse more efficiency, so the warehouse must have the stability and good operation chain such as receive and transfer the product to customer, storage the inventory, manage the location, making the barcode...in that operation chain, storage the inventory in the warehouse is most important thing that we must consider. In addition, to reduce costs for larger warehouse or expand the floor space of the small warehouse, it is impossible to implement this with a traditional warehouse. The warehouse is called the traditional warehouse when it uses the fixed rack. To build this type of warehouse, the space for storage must be very large. However, the cost for renting or buying the large warehouse is too expensive, so to reduce cost and build the flexible warehouse which can store the huge quantity of product within limited area, then the smart warehouse is necessary to consider. The smart warehouse system with autonomous mobile rack vehicles (MRV) increases the space utilization by providing only a few open aisles at a time for accessing the racks with minimal intervention. It is always necessary to take into account the mobile-rack vehicles (or autonomous logistics vehicles). This thesis deals with designing the robust controller for maintaining safe spacing with collision avoidance and lateral movement synchronization in the fully automated warehouse. The compact MRV dynamics are presented for the interconnected string of MRV with communication delay. Next, the string stability with safe working space of the MRV has been described for guaranteeing complete autonomous logistics in the extremely cold environment without rail rack. In addition, the controller order has been significantly reduced to the low-order system without serious performance degradation. Finally, this control method addresses the control robustness as well as the performances of MRV against unavoidable uncertainties, disturbances, and noises for warehouse automation.Contents List of Tables vii List of Figures viii Chapter 1. Introduction 1 1.1 Mobile rack vehicle 2 1.2 Leader and following vehicle 5 1.2.1 Cruise control 5 1.2.2 Adaptive cruise control 6 1.2.3 String stability of longitudinal vehicle platoon 10 1.2.4 String stability of lateral vehicle platoon 15 1.3 Problem definition 20 1.4 Purpose and aim 21 1.5 Contribution 22 Chapter 2. Robust control synthesis 23 2.1 Introduction 23 2.2 Uncertainty modeling 23 2.2.1 Unstructured uncertainties 24 2.2.2 Parametric uncertainties 25 2.2.3 Structured uncertainties 26 2.2.4 Linear fractional transformation 26 2.2.5 Coprime factor uncertainty 27 2.3 Stability criterion 31 2.3.1 Small gain theorem 31 2.3.2 Structured singular value synthesis brief definition 33 2.4 Robustness analysis and controller design 34 2.4.1 Forming generalized plant and structure 34 2.4.2 Robustness analysis 37 2.5 Robust controller using loop shaping design 39 2.5.1 Stability robustness for a coprime factor plant description 41 2.6 Reduced controller 44 2.6.1 Truncation 45 2.6.2 Residualization 46 2.6.3 Balanced realization 47 2.6.4 Optimal Hankel norm approximation 48 Chapter 3. Dynamical model of mobile rack vehicle. 53 3.1 Dynamical model of longitudinal mobile rack vehicle 53 3.2 Dynamical model of lateral mobile rack vehicle 56 3.1.1 Kinematics and dynamics of mobile rack vehicles 56 3.1.2 Lateral vehicle model with nominal value 62 Chapter 4. Controller design for mobile rack vehicle 65 4.1 Robust controller synthesis for longitudinal of mobile rack vehicles 65 4.2 Robust controller synthesis for lateral of mobile rack vehicles 73 4.2.1 Lateral vehicle model with uncertainty description 74 4.2.2 Controller design 78 4.2.3 Robust performance problem 82 4.3 String stability of connected mobile rack vehicle 85 4.4 Lower order control synthesis 87 Chapter 5. Numerical simulation and discussion 92 5.1 Mobile rack longitudinal control simulation and discussion 92 5.2 Mobile rack lateral control simulation and discussion 99 Chapter 6. Conclusion 110 Reference 112Docto

The Crewman's Associate for Path Control (CAPC): an automated driving function

Army Tank Automotive Command, Warren, Mich.http://deepblue.lib.umich.edu/bitstream/2027.42/1134/2/88210.0001.001.pd

Nonlinear Modeling and Control of Driving Interfaces and Continuum Robots for System Performance Gains

With the rise of (semi)autonomous vehicles and continuum robotics technology and applications, there has been an increasing interest in controller and haptic interface designs. The presence of nonlinearities in the vehicle dynamics is the main challenge in the selection of control algorithms for real-time regulation and tracking of (semi)autonomous vehicles. Moreover, control of continuum structures with infinite dimensions proves to be difficult due to their complex dynamics plus the soft and flexible nature of the manipulator body. The trajectory tracking and control of automobile and robotic systems requires control algorithms that can effectively deal with the nonlinearities of the system without the need for approximation, modeling uncertainties, and input disturbances. Control strategies based on a linearized model are often inadequate in meeting precise performance requirements. To cope with these challenges, one must consider nonlinear techniques. Nonlinear control systems provide tools and methodologies for enabling the design and realization of (semi)autonomous vehicle and continuum robots with extended specifications based on the operational mission profiles. This dissertation provides an insight into various nonlinear controllers developed for (semi)autonomous vehicles and continuum robots as a guideline for future applications in the automobile and soft robotics field. A comprehensive assessment of the approaches and control strategies, as well as insight into the future areas of research in this field, are presented.First, two vehicle haptic interfaces, including a robotic grip and a joystick, both of which are accompanied by nonlinear sliding mode control, have been developed and studied on a steer-by-wire platform integrated with a virtual reality driving environment. An operator-in-the-loop evaluation that included 30 human test subjects was used to investigate these haptic steering interfaces over a prescribed series of driving maneuvers through real time data logging and post-test questionnaires. A conventional steering wheel with a robust sliding mode controller was used for all the driving events for comparison. Test subjects operated these interfaces for a given track comprised of a double lane-change maneuver and a country road driving event. Subjective and objective results demonstrate that the driver’s experience can be enhanced up to 75.3% with a robotic steering input when compared to the traditional steering wheel during extreme maneuvers such as high-speed driving and sharp turn (e.g., hairpin turn) passing. Second, a cellphone-inspired portable human-machine-interface (HMI) that incorporated the directional control of the vehicle as well as the brake and throttle functionality into a single holistic device will be presented. A nonlinear adaptive control technique and an optimal control approach based on driver intent were also proposed to accompany the mechatronic system for combined longitudinal and lateral vehicle guidance. Assisting the disabled drivers by excluding extensive arm and leg movements ergonomically, the device has been tested in a driving simulator platform. Human test subjects evaluated the mechatronic system with various control configurations through obstacle avoidance and city road driving test, and a conventional set of steering wheel and pedals were also utilized for comparison. Subjective and objective results from the tests demonstrate that the mobile driving interface with the proposed control scheme can enhance the driver’s performance by up to 55.8% when compared to the traditional driving system during aggressive maneuvers. The system’s superior performance during certain vehicle maneuvers and approval received from the participants demonstrated its potential as an alternative driving adaptation for disabled drivers. Third, a novel strategy is designed for trajectory control of a multi-section continuum robot in three-dimensional space to achieve accurate orientation, curvature, and section length tracking. The formulation connects the continuum manipulator dynamic behavior to a virtual discrete-jointed robot whose degrees of freedom are directly mapped to those of a continuum robot section under the hypothesis of constant curvature. Based on this connection, a computed torque control architecture is developed for the virtual robot, for which inverse kinematics and dynamic equations are constructed and exploited, with appropriate transformations developed for implementation on the continuum robot. The control algorithm is validated in a realistic simulation and implemented on a six degree-of-freedom two-section OctArm continuum manipulator. Both simulation and experimental results show that the proposed method could manage simultaneous extension/contraction, bending, and torsion actions on multi-section continuum robots with decent tracking performance (e.g. steady state arc length and curvature tracking error of 3.3mm and 130mm-1, respectively). Last, semi-autonomous vehicles equipped with assistive control systems may experience degraded lateral behaviors when aggressive driver steering commands compete with high levels of autonomy. This challenge can be mitigated with effective operator intent recognition, which can configure automated systems in context-specific situations where the driver intends to perform a steering maneuver. In this article, an ensemble learning-based driver intent recognition strategy has been developed. A nonlinear model predictive control algorithm has been designed and implemented to generate haptic feedback for lateral vehicle guidance, assisting the drivers in accomplishing their intended action. To validate the framework, operator-in-the-loop testing with 30 human subjects was conducted on a steer-by-wire platform with a virtual reality driving environment. The roadway scenarios included lane change, obstacle avoidance, intersection turns, and highway exit. The automated system with learning-based driver intent recognition was compared to both the automated system with a finite state machine-based driver intent estimator and the automated system without any driver intent prediction for all driving events. Test results demonstrate that semi-autonomous vehicle performance can be enhanced by up to 74.1% with a learning-based intent predictor. The proposed holistic framework that integrates human intelligence, machine learning algorithms, and vehicle control can help solve the driver-system conflict problem leading to safer vehicle operations

Haptic Steering Interfaces for Semi-Autonomous Vehicles

Autonomous vehicles are predicted to significantly improve transportation quality by reducing traffic congestion, fuel expenditure and road accidents. However, until autonomous vehicles are reliable in all scenarios, human drivers will be asked to supervise automation behavior and intervene in automated driving when deemed necessary. Retaining the human driver in a strictly supervisory role, however, may make the driver complacent and reduce driver's situation awareness and driving skills which ironically, can further compromise the driver’s ability to intervene in safety-critical scenarios. Such issues can be alleviated by designing a human-automation interface that keeps the driver in-the-loop through constant interaction with automation and continuous feedback of automation's actions. This dissertation evaluates the utility of haptic feedback at the steering interface for enhancing driver awareness and enabling continuous human-automation interaction and performance improvement in semi-autonomous vehicles. In the first part of this dissertation, I investigate a driving scheme called Haptic Shared Control (HSC) in which the human driver and automation system share the steering control by simultaneously acting at the steering interface with finite mechanical impedances. I hypothesize that HSC can mitigate the human factors issues associated with semi-autonomous driving by allowing the human driver to continuously interact with automation and receive feedback about automation action. To test this hypothesis, I present two driving simulator experiments that are focused on the evaluation of HSC with respect to existing driving schemes during induced human and automation faults. In the first experiment, I compare obstacle avoidance performance of HSC with two existing control sharing schemes that support instantaneous transfers of control authority between human and automation. The results indicate that HSC outperforms both schemes in terms of obstacle avoidance, maneuvering efficiency, and driver engagement. In the second experiment, I consider emergency scenarios where I compare two HSC designs that provide high and low control authority to automation and an existing paradigm that decouples the driver input from the tires during collision avoidance. Results show that decoupling the driver invokes out-of-the-loop issues and misleads drivers to believe that they are in control. I also discover a `fault protection tradeoff': as the control authority provided to one agent increases, the protection against that agent's faults provided by the other agent reduces. In the second part of this dissertation, I focus on the problem of estimating haptic feedback from the road, or the road feedback. Road feedback is critical to making the driver aware of the state of the vehicle and road conditions, and its estimates are used in a variety of driver assist systems. However, conventional estimators only estimate road feedback on flat roads. To overcome this issue, I develop three estimators that enable road feedback estimation on uneven roads. I test and compare the performance of the three estimators by performing driving experiments on uneven roads such as road slopes and cleats. In the final part of this dissertation, I shift focus from physical human-automation interaction to human-human interaction. I present the evidence from the literature demonstrating that haptic feedback improves the performance of two humans physically collaborating on a shared task. I develop a control-theoretic model for haptic communication that can describe the mechanism by which haptic interaction facilitates performance improvement. The model creates a promising means to transfer the obtained insights to design robots or automation systems that can collaborate more efficiently with humans.PHDMechanical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/169975/1/akshaybh_1.pd