Sub-10nm Transistors for Low Power Computing: Tunnel FETs and Negative Capacitance FETs

One of the major roadblocks in the continued scaling of standard CMOS technology is its alarmingly high leakage power consumption. Although circuit and system level methods can be employed to reduce power, the fundamental limit in the overall energy efficiency of a system is still rooted in the MOSFET operating principle: an injection of thermally distributed carriers, which does not allow subthreshold swing (SS) lower than 60mV/dec at room temperature. Recently, a new class of steep-slope devices like Tunnel FETs (TFETs) and Negative-Capacitance FETs (NCFETs) have garnered intense interest due to their ability to surpass the 60mV/dec limit on SS at room temperature. The focus of this research is on the simulation and design of TFETs and NCFETs for ultra-low power logic and memory applications. Using full band quantum mechanical model within the Non-Equilibrium Greens Function (NEGF) formalism, source-underlapping has been proposed as an effective technique to lower the SS in GaSb-InAs TFETs. Band-tail states, associated with heavy source doping, are shown to significantly degrade the SS in TFETs from their ideal value. To solve this problem, undoped source GaSb-InAs TFET in an i-i-n configuration is proposed. A detailed circuit-to-system level evaluation is performed to investigate the circuit level metrics of the proposed devices. To demonstrate their potential in a memory application, a 4T gain cell (GC) is proposed, which utilizes the low-leakage and enhanced drain capacitance of TFETs to realize a robust and long retention time GC embedded-DRAMs. The device/circuit/system level evaluation of proposed TFETs demonstrates their potential for low power digital applications. The second part of the thesis focuses on the design space exploration of hysteresis-free Negative Capacitance FETs (NCFETs). A cross-architecture analysis using HfZrOx ferroelectric (FE-HZO) integrated on bulk MOSFET, fully-depleted SOI-FETs, and sub-10nm FinFETs shows that FDSOI and FinFET configurations greatly benefit the NCFET performance due to their undoped body and improved gate-control which enables better capacitance matching with the ferroelectric. A low voltage NC-FinFET operating down to 0.25V is predicted using ultra-thin 3nm FE-HZO. Next, we propose one-transistor ferroelectric NOR type (Fe-NOR) non-volatile memory based on HfZrOx ferroelectric FETs (FeFETs). The enhanced drain-channel coupling in ultrashort channel FeFETs is utilized to dynamically modulate memory window of storage cells thereby resulting in simple erase-, program-and read-operations. The simulation analysis predicts sub-1V program/erase voltages in the proposed Fe-NOR memory array and therefore presents a significantly lower power alternative to conventional FeRAM and NOR flash memories

Multigate MOSFETs for digital performance and high linearity, and their fabrication techniques

The aggressive downscaling of complementary metal–oxide–semiconductor (CMOS) technology is facing great challenges to overcome severe short-channel effects. Multigate MOSFETs are one of the most promising candidates for scaling beyond Si CMOS, due to better electrostatic control as compared to conventional planar MOSFETs. Conventional dry etching-induced surface damage is one of the main sources of performance degradation for multigate transistors, especially for III-V high mobility materials. It is also challenging to increase the fin aspect ratio by dry etching because of the non-ideal anisotropic etching profile. Here, we report a novel method, inverse metal-assisted chemical etching (i-MacEtch), in lieu of conventional RIE etching, for 3D fin channel formation. InP junctionless FinFETs with record high-aspect-ratio (~ 50:1) fins are demonstrated by this method for the first time. The i-MacEtch process flow eliminates dry-etching-induced plasma damage, high energy ion implantation damage, and high temperature annealing, allowing for the fabrication of InP fin channels with atomically smooth sidewalls. The sidewall features resulting from this unique and simplified process ensure high interface quality between high-k dielectric layer and InP fin channel. Experimental and theoretical analyses show that high-aspect-ratio FinFETs, which could deliver more current per area under much relaxed horizontal geometry requirements, are promising in pushing the technology node ahead where conventional scaling has met its physical limits. The performance of the FinFET was further investigated through numerical simulation. A new kind of FinFET with asymmetric gate and source/drain contacts has been proposed and simulated. By benchmarking with conventional symmetric FinFET, better short-channel behavior with much higher current density is confirmed. The design guidelines are provided. The overall circuit delay can be minimized by optimizing gate lengths according to different local parasites among circuits in interconnection-delay-dominated SoC applications. Continued transistor scaling requires even stronger gate electrostatic control over the channel. The ultimate scaling structure would be gate-all-around nanowire MOSFETs. We demonstrate III-V junctionless gate-all-around (GAA) nanowire (NW) MOSFETs for the first time. For the first time, source/drain (S/D) resistance and thermal budget are minimized by regrowth using metalorganic chemical vapor deposition (MOCVD) in III-V MOSFETs. The fabricated short-channel (Lg=80 nm) GaAs GAA NWFETs with extremely narrow nanowire width (WNW= 9 nm) show excellent transconductance (gm) linearity at biases (300 mV), characterized by the high third intercept point (2.6 dBm). The high linearity is especially important for low power applications because it is insensitive to bias conditions

Strain integration and performance optimization in sub-20nm FDSOI CMOS technology

La technologie CMOS à base de Silicium complètement déserté sur isolant (FDSOI) est considérée comme une option privilégiée pour les applications à faible consommation telles que les applications mobiles ou les objets connectés. Elle doit cela à son architecture garantissant un excellent comportement électrostatique des transistors ainsi qu'à l'intégration de canaux contraints améliorant la mobilité des porteurs. Ce travail de thèse explore des solutions innovantes en FDSOI pour nœuds 20nm et en deçà, comprenant l'ingénierie de la contrainte mécanique à travers des études sur les matériaux, les dispositifs, les procédés d'intégration et les dessins des circuits. Des simulations mécaniques, caractérisations physiques (µRaman), et intégrations expérimentales de canaux contraints (sSOI, SiGe) ou de procédés générant de la contrainte (nitrure, fluage de l'oxyde enterré) nous permettent d'apporter des recommandations pour la technologie et le dessin physique des transistors en FDSOI. Dans ce travail de thèse, nous avons étudié le transport dans les dispositifs à canal court, ce qui nous a amené à proposer une méthode originale pour extraire simultanément la mobilité des porteurs et la résistance d'accès. Nous mettons ainsi en évidence la sensibilité de la résistance d'accès à la contrainte que ce soit pour des transistors FDSOI ou nanofils. Nous mettons en évidence et modélisons la relaxation de la contrainte dans le SiGe apparaissant lors de la gravure des motifs et causant des effets géométriques (LLE) dans les technologies FDSOI avancées. Nous proposons des solutions de type dessin ainsi que des solutions technologiques afin d'améliorer la performance des cellules standard digitales et de mémoire vive statique (SRAM). En particulier, nous démontrons l'efficacité d'une isolation duale pour la gestion de la contrainte et l'extension de la capacité de polarisation arrière, qui un atout majeur de la technologie FDSOI. Enfin, la technologie 3D séquentielle rend possible la polarisation arrière en régime dynamique, à travers une co-optimisation dessin/technologie (DTCO).The Ultra-Thin Body and Buried oxide Fully Depleted Silicon On Insulator (UTBB FDSOI) CMOS technology has been demonstrated to be highly efficient for low power and low leakage applications such as mobile, internet of things or wearable. This is mainly due to the excellent electrostatics in the transistor and the successful integration of strained channel as a carrier mobility booster. This work explores scaling solutions of FDSOI for sub-20nm nodes, including innovative strain engineering, relying on material, device, process integration and circuit design layout studies. Thanks to mechanical simulations, physical characterizations and experimental integration of strained channels (sSOI, SiGe) and local stressors (nitride, oxide creeping, SiGe source/drain) into FDSOI CMOS transistors, we provide guidelines for technology and physical circuit design. In this PhD, we have in-depth studied the carrier transport in short devices, leading us to propose an original method to extract simultaneously the carrier mobility and the access resistance and to clearly evidence and extract the strain sensitivity of the access resistance, not only in FDSOI but also in strained nanowire transistors. Most of all, we evidence and model the patterning-induced SiGe strain relaxation, which is responsible for electrical Local Layout Effects (LLE) in advanced FDSOI transistors. Taking into account these geometrical effects observed at the nano-scale, we propose design and technology solutions to enhance Static Random Access Memory (SRAM) and digital standard cells performance and especially an original dual active isolation integration. Such a solution is not only stress-friendly but can also extend the powerful back-bias capability, which is a key differentiating feature of FDSOI. Eventually the 3D monolithic integration can also leverage planar Fully-Depleted devices by enabling dynamic back-bias owing to a Design/Technology Co-Optimization

Asymmetric underlap optimization of sub-10nm finfets for realizing energy-efficient logic and robust memories

Leakage currents in CMOS transistors have risen dramatically with technology scaling leading to significant increase in standby power consumption. Among the various transistor candidates, the excellent short channel immunity of Silicon double gate FinFETs have made them the best contender for successful scaling to sub-10nm nodes. For sub-10nm FinFETs, new quantum mechanical leakage mechanisms such as direct source to drain tunneling (DSDT) of charge carriers through channel potential energy barrier arising due to proximity of source/drain regions coupled with the high transport direction electric field is expected to dominate overall leakage. To counter the effects of DSDT and worsening short channel effects and to maintain Ion/ Ioff, performance and power consumption at reasonable values, device optimization techniques are necessary for deeply scaled transistors. In this work, source/drain underlapping of FinFETs has been explored using quantum mechanical device simulations as a potentially promising method to lower DSDT while maintaining the Ion/ Ioff ratio at acceptable levels. By adopting a device/circuit/system level co-design approach, it is shown that asymmetric underlapping, where the drain side underlap is longer than the source side underlap, results in optimal energy efficiency for logic circuits in near-threshold as well as standard, super-threshold operating regimes. In addition, read/write conflict in 6T SRAMs and the degradation in cell noise margins due to the low supply voltage can be mitigated by using optimized asymmetric underlapped n-FinFETs for the access transistor, thereby leading to robust cache memories. When gate-workfunction tuning is possible, using asymmetric underlapped n-FinFETs for both access and pull-down devices in an SRAM bit cell can lead to high-speed and low-leakage caches. Further, it is shown that threshold voltage degradation in the presence of Hot Carrier Injection (HCI) is less severe in asymmetric underlap n-FinFETs. A lifetime projection is carried out assuming that HCI is the major degradation mechanism and it is shown that a 3.4x improvement in device lifetime is possible over symmetric underlapped n-FinFET

Compact Models for Integrated Circuit Design

This modern treatise on compact models for circuit computer-aided design (CAD) presents industry standard models for bipolar-junction transistors (BJTs), metal-oxide-semiconductor (MOS) field-effect-transistors (FETs), FinFETs, and tunnel field-effect transistors (TFETs), along with statistical MOS models. Featuring exercise problems at the end of each chapter and extensive references at the end of the book, the text supplies fundamental and practical knowledge necessary for efficient integrated circuit (IC) design using nanoscale devices. It ensures even those unfamiliar with semiconductor physics gain a solid grasp of compact modeling concepts