Assessing the Challenges of Environmental Signal Processing through the SensorScope Project

SensorScope is a collaborative project between network, signal processing, and environmental researchers that aims at providing a cheap and out-of-the-box environmental monitoring system based on a wireless sensor network. It has been successfully used in a number of deployments to gather hundreds of megabytes of environmental data. With data gathering techniques well mastered, the efficient processing of the huge amounts of the acquired information to allow for useful exploitation has become an increasingly important issue. In this paper, we present a number of challenging and relevant signal processing tasks that arise from the SensorScope project. We believe the resolution of these problems will benefit from a better understanding of the underlying physical processes. We show an example to demonstrate how physical correlations between different sensing modalities can help reduce the sampling rate

A Review of the Enviro-Net Project

Ecosystems monitoring is essential to properly understand their development and the effects of events, both climatological and anthropological in nature. The amount of data used in these assessments is increasing at very high rates. This is due to increasing availability of sensing systems and the development of new techniques to analyze sensor data. The Enviro-Net Project encompasses several of such sensor system deployments across five countries in the Americas. These deployments use a few different ground-based sensor systems, installed at different heights monitoring the conditions in tropical dry forests over long periods of time. This paper presents our experience in deploying and maintaining these systems, retrieving and pre-processing the data, and describes the Web portal developed to help with data management, visualization and analysis.Comment: v2: 29 pages, 5 figures, reflects changes addressing reviewers' comments v1: 38 pages, 8 figure

A Distributed Intelligent Sensing Approach for Environmental Monitoring Applications

Scientific reports from around the world present us with the undeniable fact that the global ecosystem is undergoing severe change. As this shift accelerates, it is ever more critical that we are able to quantify the local effects of such changes, and further, their implications, from our daily life to the biological processes that put food on our tables. In this thesis, we study the application of sensor network technology to the observation and estimation of highly local phenomena---specifically at a scale between ten to several hundred square meters. Embedding knowledge about the observed process directly into the sensor nodes' behavior via dedicated resource management or control algorithms allows us to deploy dense networks with low power requirements. Ecological systems are notoriously complex. In our work we must thus be highly experimental; it is our highest goal that we construct an approach to environmental monitoring that is not only realistic, but practical for real-world use. Our approach is centered on a commercially available sensor network product, aided by an off-the-shelf quadrotor with minimal customization. We validate our approach through a series of experiments performed from simulation all the way to reality, in deployments lasting days to several months. We motivate the need for local data via two case studies examining physical phenomena. First, employing novel modalities, we study the eclosion of a common agricultural pest. We present our efforts to acquire data that is more local than commonly employed methods, culminating in a six month deployment in a Swiss apple orchard. Next, we apply a environmental fluid dynamics model to enable the estimation of sensible heat flux using an inexpensive sensor. We integrate the sensor with a wireless sensor network and validate its capabilities in a short-term deployment. Acquiring meaningful data on a local scale requires that we advance the state of the art in multiple aspects. Static sensor networks present a classical tension between resolution, autonomy, and accuracy. We explore the performance of algorithms aimed at providing all three, showing explicitly what is required to implement these approaches for real-world applications in an autonomous deployment under uncontrolled conditions. Eventually, spatial resolution is limited by network density. Such limits may be overcome by the use of mobile sensors. We explore the use of an off-the-shelf quadrotor, equipped with environmental sensors, as an additional element in system of heterogeneous sensing nodes. Through a series of indoor and outdoor experiments, we quantify the contribution of a such a mobile sensor, and various strategies for planning its path

Hydrometeorological Data Collection, Publication And Analysis Using Open-Source Hardware And Software

Hydrometeorological data is exiguous in developing countries due to the exorbitant price of actual weather monitoring systems acquisition and communication infrastructure built mostly in developed countries. Another impediment to large scale data collection in developed countries is the lack or limited local resources to ensure the maintenance of stations equipments. However, recent advanced progresses made in information and communication technologies have paved the way to access to a large set of free software and low-cost and low-power hardware to sense and monitor the environment. Many researchers and practitioners have grasped the opportunities offered by those technological advances, but, have applied them in a restrained way. In this paper, we will attempt to make a much larger use of available and appropriate open-source hardware and software to allow for inexpensive collection, storage, publication and analysis of hydrometeorological data. Our envisioned system prototype will consist of a very few sensor nodes controlled by the Arduino micro-controller with a complete set of low-cost sensors attached to measure variables relevant to hydrological processes, a central node which gathers from each leaf nodes via Radio, data transmission over a GSM network through a Raspberry Pi from the central node. We will also explore the option to store the data into the MySQL version of the CUAHSI Observations Data Model (ODM) database using a Raspberry Pi to host the database. Access to CUAHSI Hydrologic Information System (HIS) codes will hopefully facilitate the development of software to automatically load the data into the MySQL database and publish the data

Assessing Digital Surface Models by Verifying Shadows: A Sensor Network Approach

We propose to use wireless sensor networks to assess the accuracy and application of Digital Surface Models (DSM) for the study of shadowing and solar radiation over the built environment. Using the ability of sensor network data to provide information about solar radiation and predicting the exact time of the day that the Sun starts radiating a sensor, a comparative study and statistical analysis can be undertaken in order to evaluate the accuracy of the DSM for shadowing and radiation studies using image processing techniques. Two DSMs of the EPFL campus with different cell resolutions (1 meter and 0.5 meters), considering only information about ground, buildings with vertical walls and trees, are constructed step by step and employed. Three DSMs of the same campus with a cell resolution of 1 meter derived from raw LIDAR data and common interpolation techniques, such as Triangulated Irregular Network (TIN), kriging, Inverse Distance Weighting (IDW), are also used for comparison

Energy adaptive buildings:From sensor data to being aware of users

Energie besparen is fundamenteel voor het realiseren van een duurzame energievoorziening. Het besparen van energie draagt bij aan milieudoelstellingen, verbetert de zakelijke positie van landen, en levert werkgelegenheid. Er zijn tal van mogelijkheden voor het behalen van aanzienlijke energiebesparingen in gebouwen gezien individuen en bedrijven gebaat zijn bij energiebesparingen en daardoor zelf de verantwoordelijkheid nemen. Het is bewezen dat het gedrag van gebouwgebruikers een grote impact heeft op de verwarming en ventilatie van ruimtes, en op het energieverbruik van verlichting en huishoudelijke apparaten. Huidige gebouwautomatiseringssystemen kunnen niet overweg met veranderingen in het gedrag van gebruikers en zijn daardoor niet in staat om het energieverbruik terug te dringen met behoud van gebruikerscomfort. Mijn promotieonderzoek wordt gedreven door het doel om een dergelijk energy adaptive building te realiseren dat intelligent systemen aanstuurt en zich aanpast aan de gebruiker en gebruikersactiviteiten door deze te leren, terwijl energieverspilling wordt teruggedrongen. Mijn focus ligt op het ontwikkelen van een framework, beginnende bij de hardware infrastructuur voor sensoren en actuatoren, het verwerken en analyseren van de sensordata, en de nodige informatie over de omgeving en gebruikersactiviteiten verkrijgen zodat het gebouw aangestuurd kan worden. Onze oplossing kan 35% besparen op het totale energieverbruik van een gebouw. Als een succesverhaal, besparen de software systemen zelfs 80% op het energieverbruik van de verlichting in het restaurant van de Bernoulliborg. Wij commercialiseren de resultaten verkregen in ons onderzoek door het oprichten van de start-up SustainableBuildings, een spin-off bedrijf van onze universiteit, om onze oplossing aan te bieden aan kantoorgebouwen.Saving energy is the foundation for achieving a sustainable energy supply. Saving energy contributes to environmental objectives, improves the competitiveness of a country’s businesses, and boosts employment. There are numerous opportunities for achieving significant energy savings in buildings since individuals and businesses have an interest themselves in saving energy and will shoulder the responsibility for doing so.Occupant behaviour has shown to have large impact on space heating and cooling demand, energy consumption of lighting and appliances. Current building automation systems are unable to cope with changes caused by occupants’ behaviour and interaction with the environment, therefore they fail to reduce unnecessary energy consumption while preserving user comfort.My PhD research is driven by the aim of realising such energy adaptive buildings that facilitate intelligent control, that learn and adapt to the building users and their activities, while reducing energy waste. My particular focus is on a framework, going from the hardware infrastructure for sensing and actuating, to processing and analysing sensor data, providing necessary information about the environment and occupants’ activities for the system to produce adaptive control strategies, regulating the environment accordingly.Our solution can save 35% of energy for a single building. As a success story, the software system saves 80 percent on energy spent for lighting in the restaurant of the Bernoulliborg.We are commercialising the results of our research by creating the SustainableBuildings start-up, a spin-off from our university, to offer the solutions to non-residential buildings, first in the Netherlands, and later extending wider

Design and Implementation of Large-Scale Wireless Sensor Networks for Environmental Monitoring Applications

Environmental monitoring represents a major application domain for wireless sensor networks (WSN). However, despite significant advances in recent years, there are still many challenging issues to be addressed to exploit the full potential of the emerging WSN technology. In this dissertation, we introduce the design and implementation of low-power wireless sensor networks for long-term, autonomous, and near-real-time environmental monitoring applications. We have developed an out-of-box solution consisting of a suite of software, protocols and algorithms to provide reliable data collection with extremely low power consumption. Two wireless sensor networks based on the proposed solution have been deployed in remote field stations to monitor soil moisture along with other environmental parameters. As parts of the ever-growing environmental monitoring cyberinfrastructure, these networks have been integrated into the Texas Environmental Observatory system for long-term operation. Environmental measurement and network performance results are presented to demonstrate the capability, reliability and energy-efficiency of the network

Accurate monitoring and fault detection in wind measuring devices through wireless sensor networks

Many wind energy projects report poor performance as low as 60% of the predicted performance. The reason for this is poor resource assessment and the use of new untested technologies and systems in remote locations. Predictions about the potential of an area for wind energy projects (through simulated models) may vary from the actual potential of the area. Hence, introducing accurate site assessment techniques will lead to accurate predictions of energy production from a particular area. We solve this problem by installing a Wireless Sensor Network (WSN) to periodically analyze the data from anemometers installed in that area. After comparative analysis of the acquired data, the anemometers transmit their readings through a WSN to the sink node for analysis. The sink node uses an iterative algorithm which sequentially detects any faulty anemometer and passes the details of the fault to the central system or main station. We apply the proposed technique in simulation as well as in practical implementation and study its accuracy by comparing the simulation results with experimental results to analyze the variation in the results obtained from both simulation model and implemented model. Simulation results show that the algorithm indicates faulty anemometers with high accuracy and low false alarm rate when as many as 25% of the anemometers become faulty. Experimental analysis shows that anemometers incorporating this solution are better assessed and performance level of implemented projects is increased above 86% of the simulated models