An overview of waste materials for sustainable road construction

Untreated soil typically has low shear strength, swelling behavior, high compressibility and its characteristics were highly dependent on the environment. In general, such problematic soil will lead to severe damages in road construction industry such as bearing capacity failure, slope instability, and excessive settlement. Agricultural waste, construction waste, and municipal waste have recently gained considerable attention as a sustainable material in road construction application due to its availability, environmental friendly and low-cost materials. Therefore in this review, randomly distributed fiber reinforced soil and oriented distributed fiber reinforced soil will be extensively discussed based on the emerging trend. It further reviewed the feasibility of using waste materials as a reinforcement material for the road construction industry. The review also attempts to evaluate and compare the engineering properties of soil and sustainable materials in order to enhance soil performance as well as help to improve the environment affected by growing waste materials

Development and Field Testing of the FootFall Planning System for the ATHLETE Robots

The FootFall Planning System is a ground-based planning and decision support system designed to facilitate the control of walking activities for the ATHLETE (All-Terrain Hex-Limbed Extra-Terrestrial Explorer) family of robots. ATHLETE was developed at NASA's Jet Propulsion Laboratory (JPL) and is a large six-legged robot designed to serve multiple roles during manned and unmanned missions to the Moon; its roles include transportation, construction and exploration. Over the four years from 2006 through 2010 the FootFall Planning System was developed and adapted to two generations of the ATHLETE robots and tested at two analog field sites (the Human Robotic Systems Project's Integrated Field Test at Moses Lake, Washington, June 2008, and the Desert Research and Technology Studies (D-RATS), held at Black Point Lava Flow in Arizona, September 2010). Having 42 degrees of kinematic freedom, standing to a maximum height of just over 4 meters, and having a payload capacity of 450 kg in Earth gravity, the current version of the ATHLETE robot is a uniquely complex system. A central challenge to this work was the compliance of the high-DOF (Degree Of Freedom) robot, especially the compliance of the wheels, which affected many aspects of statically-stable walking. This paper will review the history of the development of the FootFall system, sharing design decisions, field test experiences, and the lessons learned concerning compliance and self-awareness

구조로봇을 위한 강건한 계층적 동작 계획 및 제어

학위논문(박사) -- 서울대학교대학원 : 공과대학 기계항공공학부, 2021.8. 박종우.Over the last several years, robotics has experienced a striking development, and a new generation of robots has emerged that shows great promise in being able to accomplish complex tasks associated with human behavior. Nowadays the objectives of the robots are no longer restricted to the automaton in the industrial process but are changing into explorers for hazardous, harsh, uncooperative, and extreme environments. As these robots usually operate in dynamic and unstructured environments, they should be robust, adaptive, and reactive under various changing operation conditions. We propose online hierarchical optimization-based planning and control methodologies for a rescue robot to execute a given mission in such a highly unstructured environment. A large number of degrees of freedom is provided to robots in order to achieve diverse kinematic and dynamic tasks. However, accomplishing such multiple objectives renders on-line reactive motion planning and control problems more difficult to solve due to the incompatible tasks. To address this problem, we exploit a hierarchical structure to precisely resolve conflicts by creating a priority in which every task is achieved as much as possible according to the levels. In particular, we concentrate on the reasoning about the task regularization to ensure the convergence and robustness of a solution in the face of singularity. As robotic systems with real-time motion planners or controllers often execute unrehearsed missions, a desired task cannot always be driven to a singularity free configuration. We develop a generic solver for regularized hierarchical quadratic programming without resorting to any off-the-shelf QP solver to take advantage of the null-space projections for computational efficiency. Therefore, the underlying principles are thoroughly investigated. The robust optimal solution is obtained under both equality and inequality tasks or constraints while addressing all problems resulting from the regularization. Especially as a singular value decomposition centric approach is leveraged, all hierarchical solutions and Lagrange multipliers for properly handling the inequality constraints are analytically acquired in a recursive procedure. The proposed algorithm works fast enough to be used as a practical means of real-time control system, so that it can be used for online motion planning, motion control, and interaction force control in a single hierarchical optimization. Core system design concepts of the rescue robot are presented. The goals of the robot are to safely extract a patient and to dispose a dangerous object instead of humans. The upper body is designed humanoid in form with replaceable modularized dual arms. The lower body is featured with a hybrid tracked and legged mobile platform to simultaneously acquire versatile manipulability and all-terrain mobility. Thus, the robot can successfully execute a driving task, dangerous object manipulation, and casualty extraction missions by changing the pose and modularized equipments in an optimized manner. Throughout the dissertation, all proposed methods are validated through extensive numerical simulations and experimental tests. We highlight precisely how the rescue robot can execute a casualty extraction and a dangerous object disposal mission both in indoor and outdoor environments that none of the existing robots has performed.최근에 등장한 새로운 세대의 로봇은 기존에는 인간만이 할 수 있었던 복잡한 일을 로봇 또한 수행할 수 있음을 보여주었다. 특히 DARPA Robotics Challenge를 통해 이러한 사실을 잘 확인할 수 있으며, 이 로봇들은 공장과 같은 정형화된 환경에서 자동화된 일을 반복적으로 수행하던 임무에서 더 나아가 극한의 환경에서 인간을 대신하여 위험한 임무를 수행할 수 있는 방향으로 발전하고 있다. 그래서 사람들은 재난환경에서 안전하고 시의 적절하게 대응할 수 있는 여러 가지 대안 중에서 실현 가능성이 높은 대처 방안으로 로봇을 생각하게 되었다. 하지만 이러한 로봇은 동적으로 변화하는 비정형 환경에서 임무를 수행할 수 있어야 하기 때문에 불확실성에 대해 강건해야하고, 다양한 환경 조건에서 능동적으로 반응을 할 수 있어야 한다. 본 학위논문에서는 로봇이 비정형 환경에서 강건하면서도 적응적으로 동작할 수 있는 실시간 최적화 기반의 동작 계획 및 제어 방법과 구조 로봇의 설계 개념을 제안하고자 한다. 인간은 많은 자유도를 가지고 있으며, 하나의 전신 동작을 생성할 때 다양한 기구학 혹은 동역학적 특성을 가지는 세부 동작 혹은 작업을 정의하고, 이를 효과적으로 종합할 수 있다. 그리고 학습을 통해 각 동작 요소들을 최적화할 뿐만 아니라 상황 에 따라 각 동작 요소에 우선순위를 부여하여 이를 효과적으로 결합하거나 분리하여 실시간으로 최적의 동작을 생성하고 제어한다. 즉, 상황에 따라 중요한 동작요소를 우선적으로 수행하고 우선순위가 낮은 동작요소는 부분 혹은 전체적으로 포기하기도 하면서 매우 유연하게 전체 동작을 생성하고 최적화 한다. 인간과 같이 다자유도를 보유한 로봇 또한 기구학과 동역학적 특성을 가지는 다양한 세부 동작 혹은 작업을 작업공간(task space) 혹은 관절공간(configuration space)에서 정의할 수 있으며, 우선순위에 따라 이를 효과적으로 결합하여 전체 동작을 생 성하고 제어할 수 있다. 서로 양립하기 어려운 로봇의 동작 문제를 해결하기 위해 동작들 사이에 우선순위를 부여하여 계층을 생성하고, 이에 따라 로봇의 전신 동작을 구현하는 방법은 오랫동안 연구가 진행되어 왔다. 이러한 계층적 최적화를 이용하면 우선순위가 높은 동작부터 순차적으로 실행하지만, 우선순위가 낮은 동작요소들도 가능한 만족시키는 최적의 해를 찾을 수 있다. 하지만 관절의 구동 범위와 같은 부등식의 조건이 포함된 계층적 최적화 문제에서 특이점에 대한 강건성까지 확보할 수 있는 방법에 대해서는 아직까지 많은 부분이 밝 혀진 바가 없다. 따라서 본 학위논문에서는 등식과 부등식으로 표현되는 구속조건 혹은 동작요소를 계층적 최적화에 동시에 포함시키고, 특이점이 존재하더라도 강건성과 수렴성을 보장하는 관절공간에서의 최적해를 확보하는데 집중한다. 왜나하면 비정형 임무를 수행하는 로봇은 사전에 계획된 동작을 수행하는 것이 아닌 변화하는 환경조건에 따라 실시간으로 동작을 계획하고 제어해야 하기 때문에 특이점이 없는 자세로 로봇을 항상 제어하기가 어렵다. 그리고 이렇게 특이점을 회피하는 방향으로 로봇을 제어하는 것은 로봇의 운용성을 심각하게 저해시킬 수 있다. 특이점 근방에서의 해의 강건성이 보장되지 않으면 로봇 관절에 과도한 속도 혹은 토크가 발생하여 로봇의 임무 수행이 불가능하거나 환경과 로봇의 손상을 초래할 수 있으며, 나아가 로봇과 함께 임무를 수행하는 사람에게 상해를 가할 수도 있다. 특이점에 대한 강건성을 확보하기 위해 우선순위 기반의 계층적 최적화와 정규화 (regularization)를 통합하여 정규화된 계층적 최적화 (RHQP: Regularized Hierarchical Quadratic Program) 문제를 다룬다. 부등식이 포함된 계층적 최적화에 정규화를 동시에 고려함으로써 야기되는 많은 문제점들을 해결하고 해의 최적성과 강건성을 확보할 수 있는 방법을 제안한다. 특히 외부의 최적화 프로그램을 사용하지 않고 수치적 최적화 (numerical optimization) 이론과 우선순위에 기반을 두는 여유자유도 로봇의 해석 기법을 이용하여 계산의 효율성을 극대화할 수 있는 이차 프로그램(quadratic programming)을 제안한다. 또한 이와 동시에 정규화된 계층적 최적화 문제의 이론적 구조를 철저하게 분석한다. 특히 특이값 분해 (singular value decomposition)를 통해 최적해와 부등식 조건을 처리하는데 필요한 라그랑지 승수를 재귀적인 방법으로 해석적 형태로 구함으로써 계산의 효율성을 증대시키고 동시에 부등식의 조건을 오류 없이 정확하게 처리할 수 있도록 하였다. 그리고 정규화된 계층적 최적화를 힘제어까지 확장하여 환경과 로봇의 안전한 상호작용을 보장하여 로봇이 적절한 힘으로 환경과 접촉할 수 있도록 하였다. 불확실성이 존재하는 비정형 환경에서 비정형 임무를 수행할 수 있는 구조로봇의 핵심 설계 개념을 제시한다. 비정형 환경에서의 조작 성능과 이동 성능을 동시에 확보할 수 있는 형상으로 로봇을 설계하여 구조 로봇으로 하여금 최종 목적으로 설정된 인간을 대신하여 부상자를 구조하고 위험물을 처리하는 임무를 효과적으로 수행할 수 있도록 한다. 구조 로봇에 필요한 매니퓰레이터는 부상자 구조 임무와 위험물 처리 임무에 따라 교체 가능한 모듈형으로 설계하여 각각의 임무에 따라 최적화된 매니퓰 레이터를 장착하여 임무를 수행할 수 있다. 하체는 트랙과 관절이 결합된 하이브리드 형태를 취하고 있으며, 주행 임무와 조작임무에 따라 형상을 변경할 수 있다. 형상 변경과 모듈화된 매니퓰레이터를 통해서조작 성능과 험한 지형에서 이동할 수 있는 주행 성능을 동시에 확보하였다. 최종적으로 구조로봇의 설계와 실시간 계층적 제어를 이용하여 비정형 실내외 환경에서 구조로봇이 주행임무, 위험물 조작임무, 부상자 구조 임무를 성공적으로 수 행할 수 있음을 해석과 실험을 통하여 입증함으로써 본 학위논문에서 제안한 설계와 정규화된 계층적 최적화 기반의 제어 전략의 유용성을 검증하였다.1 Introduction 1 1.1 Motivations 1 1.2 Related Works and Research Problems for Hierarchical Control 3 1.2.1 Classical Approaches 3 1.2.2 State-of-the-Art Strategies 4 1.2.3 Research Problems 7 1.3 Robust Rescue Robots 9 1.4 Research Goals 12 1.5 Contributions of ThisThesis 13 1.5.1 Robust Hierarchical Task-Priority Control 13 1.5.2 Design Concepts of Robust Rescue Robot 16 1.5.3 Hierarchical Motion and ForceControl 17 1.6 Dissertation Preview 18 2 Preliminaries for Task-Priority Control Framework 21 2.1 Introduction 21 2.2 Task-Priority Inverse Kinematics 23 2.3 Recursive Formulation of Null Space Projector 28 2.4 Conclusion 31 3 Robust Hierarchical Task-Priority Control 33 3.1 Introduction 33 3.1.1 Motivations 35 3.1.2 Objectives 36 3.2 Task Function Approach 37 3.3 Regularized Hierarchical Optimization with Equality Tasks 41 3.3.1 Regularized Hierarchical Optimization 41 3.3.2 Optimal Solution 45 3.3.3 Task Error and Hierarchical Matrix Decomposition 49 3.3.4 Illustrative Examples for Regularized Hierarchical Optimization 56 3.4 Regularized Hierarchical Optimization with Inequality Constraints 60 3.4.1 Lagrange Multipliers 61 3.4.2 Modified Active Set Method 66 3.4.3 Illustrative Examples of Modified Active Set Method 70 3.4.4 Examples for Hierarchical Optimization with Inequality Constraint 72 3.5 DLS-HQP Algorithm 79 3.6 Concluding Remarks 80 4 Rescue Robot Design and Experimental Results 83 4.1 Introduction 83 4.2 Rescue Robot Design 85 4.2.1 System Design 86 4.2.2 Variable Configuration Mobile Platform 92 4.2.3 Dual Arm Manipulators 95 4.2.4 Software Architecture 97 4.3 Performance Verification for Hierarchical Motion Control 99 4.3.1 Real-Time Motion Generation 99 4.3.2 Task Specifications 103 4.3.3 Singularity Robust Task Priority 106 4.3.4 Inequality Constraint Handling and Computation Time 111 4.4 Singularity Robustness and Inequality Handling for Rescue Mission 117 4.5 Field Tests 122 4.6 Concluding Remarks 126 5 Hierarchical Motion and Force Control 129 5.1 Introduction 129 5.2 Operational Space Control 132 5.3 Acceleration-Based Hierarchical Motion Control 134 5.4 Force Control 137 5.4.1 Force Control with Inner Position Loop 141 5.4.2 Force Control with Inner Velocity Loop 144 5.5 Motion and Force Control 145 5.6 Numerical Results for Acceleration-Based Motion and Force Control 148 5.6.1 Task Specifications 150 5.6.2 Force Control Performance 151 5.6.3 Singularity Robustness and Inequality Constraint Handling 155 5.7 Velocity Resolved Motion and Force Control 160 5.7.1 Velocity-Based Motion and Force Control 161 5.7.2 Experimental Results 163 5.8 Concluding Remarks 167 6 Conclusion 169 6.1 Summary 169 6.2 Concluding Remarks 173 A Appendix 175 A.1 Introduction to PID Control 175 A.2 Inverse Optimal Control 176 A.3 Experimental Results and Conclusion 181 Bibliography 183 Abstract 207박

System Design, Motion Modelling and Planning for a Recon figurable Wheeled Mobile Robot

Over the past ve decades the use of mobile robotic rovers to perform in-situ scienti c investigations on the surfaces of the Moon and Mars has been tremendously in uential in shaping our understanding of these extraterrestrial environments. As robotic missions have evolved there has been a greater desire to explore more unstructured terrain. This has exposed mobility limitations with conventional rover designs such as getting stuck in soft soil or simply not being able to access rugged terrain. Increased mobility and terrain traversability are key requirements when considering designs for next generation planetary rovers. Coupled with these requirements is the need to autonomously navigate unstructured terrain by taking full advantage of increased mobility. To address these issues, a high degree-of-freedom recon gurable platform that is capable of energy intensive legged locomotion in obstacle-rich terrain as well as wheeled locomotion in benign terrain is proposed. The complexities of the planning task that considers the high degree-of-freedom state space of this platform are considerable. A variant of asymptotically optimal sampling-based planners that exploits the presence of dominant sub-spaces within a recon gurable mobile robot's kinematic structure is proposed to increase path quality and ensure platform safety. The contributions of this thesis include: the design and implementation of a highly mobile planetary analogue rover; motion modelling of the platform to enable novel locomotion modes, along with experimental validation of each of these capabilities; the sampling-based HBFMT* planner that hierarchically considers sub-spaces to better guide search of the complete state space; and experimental validation of the planner with the physical platform that demonstrates how the planner exploits the robot's capabilities to uidly transition between various physical geometric con gurations and wheeled/legged locomotion modes

Climbing and Walking Robots

With the advancement of technology, new exciting approaches enable us to render mobile robotic systems more versatile, robust and cost-efficient. Some researchers combine climbing and walking techniques with a modular approach, a reconfigurable approach, or a swarm approach to realize novel prototypes as flexible mobile robotic platforms featuring all necessary locomotion capabilities. The purpose of this book is to provide an overview of the latest wide-range achievements in climbing and walking robotic technology to researchers, scientists, and engineers throughout the world. Different aspects including control simulation, locomotion realization, methodology, and system integration are presented from the scientific and from the technical point of view. This book consists of two main parts, one dealing with walking robots, the second with climbing robots. The content is also grouped by theoretical research and applicative realization. Every chapter offers a considerable amount of interesting and useful information

Design and Experimental Evaluation of a Hybrid Wheeled-Leg Exploration Rover in the Context of Multi-Robot Systems

With this dissertation, the electromechanic design, implementation, locomotion control, and experimental evaluation of a novel type of hybrid wheeled-leg exploration rover are presented. The actively articulated suspension system of the rover is the basis for advanced locomotive capabilities of a mobile exploration robot. The developed locomotion control system abstracts the complex kinematics of the suspension system and provides platform control inputs usable by autonomous behaviors or human remote control. Design and control of the suspension system as well as experimentation with the resulting rover are in the focus of this thesis. The rover is part of a heterogeneous modular multi-robot exploration system with an aspired sample return mission to the lunar south pole or currently hard-to-access regions on Mars. The multi-robot system pursues a modular and reconfigurable design methodology. It combines heterogeneous robots with different locomotion capabilities for enhanced overall performance. Consequently, the design of the multi-robot system is presented as the frame of the rover developments. The requirements for the rover design originating from the deployment in a modular multi-robot system are accentuated and summarized in this thesis

Third International Symposium on Artificial Intelligence, Robotics, and Automation for Space 1994

The Third International Symposium on Artificial Intelligence, Robotics, and Automation for Space (i-SAIRAS 94), held October 18-20, 1994, in Pasadena, California, was jointly sponsored by NASA, ESA, and Japan's National Space Development Agency, and was hosted by the Jet Propulsion Laboratory (JPL) of the California Institute of Technology. i-SAIRAS 94 featured presentations covering a variety of technical and programmatic topics, ranging from underlying basic technology to specific applications of artificial intelligence and robotics to space missions. i-SAIRAS 94 featured a special workshop on planning and scheduling and provided scientists, engineers, and managers with the opportunity to exchange theoretical ideas, practical results, and program plans in such areas as space mission control, space vehicle processing, data analysis, autonomous spacecraft, space robots and rovers, satellite servicing, and intelligent instruments

Proceedings of the NASA Conference on Space Telerobotics, volume 2

These proceedings contain papers presented at the NASA Conference on Space Telerobotics held in Pasadena, January 31 to February 2, 1989. The theme of the Conference was man-machine collaboration in space. The Conference provided a forum for researchers and engineers to exchange ideas on the research and development required for application of telerobotics technology to the space systems planned for the 1990s and beyond. The Conference: (1) provided a view of current NASA telerobotic research and development; (2) stimulated technical exchange on man-machine systems, manipulator control, machine sensing, machine intelligence, concurrent computation, and system architectures; and (3) identified important unsolved problems of current interest which can be dealt with by future research