Parallel HEVC Decoding on Multi- and Many-core Architectures : A Power and Performance Analysis

The Joint Collaborative Team on Video Decoding is developing a new standard named High Efficiency Video Coding (HEVC) that aims at reducing the bitrate of H.264/AVC by another 50 %. In order to fulfill the computational demands of the new standard, in particular for high resolutions and at low power budgets, exploiting parallelism is no longer an option but a requirement. Therefore, HEVC includes several coding tools that allows to divide each picture into several partitions that can be processed in parallel, without degrading the quality nor the bitrate. In this paper we adapt one of these approaches, the Wavefront Parallel Processing (WPP) coding, and show how it can be implemented on multi- and many-core processors. Our approach, named Overlapped Wavefront (OWF), processes several partitions as well as several pictures in parallel. This has the advantage that the amount of (thread-level) parallelism stays constant during execution. In addition, performance and power results are provided for three platforms: a server Intel CPU with 8 cores, a laptop Intel CPU with 4 cores, and a TILE-Gx36 with 36 cores from Tilera. The results show that our parallel HEVC decoder is capable of achieving an average frame rate of 116 fps for 4k resolution on a standard multicore CPU. The results also demonstrate that exploiting more parallelism by increasing the number of cores can improve the energy efficiency measured in terms of Joules per frame substantially

3D high definition video coding on a GPU-based heterogeneous system

H.264/MVC is a standard for supporting the sensation of 3D, based on coding from 2 (stereo) to N views. H.264/MVC adopts many coding options inherited from single view H.264/AVC, and thus its complexity is even higher, mainly because the number of processing views is higher. In this manuscript, we aim at an efficient parallelization of the most computationally intensive video encoding module for stereo sequences. In particular, inter prediction and its collaborative execution on a heterogeneous platform. The proposal is based on an efficient dynamic load balancing algorithm and on breaking encoding dependencies. Experimental results demonstrate the proposed algorithm's ability to reduce the encoding time for different stereo high definition sequences. Speed-up values of up to 90× were obtained when compared with the reference encoder on the same platform. Moreover, the proposed algorithm also provides a more energy-efficient approach and hence requires less energy than the sequential reference algorith

SIMD acceleration for HEVC decoding

Single instruction multiple data (SIMD) instructions have been commonly used to accelerate video codecs. The recently introduced High Efficiency Video Coding (HEVC) codec like its predecessors is based on the hybrid video codec principle and, therefore, is also well suited to be accelerated with SIMD. In this paper we present the SIMD optimization for the entire HEVC decoder for all major SIMD instruction set architectures. Evaluation has been performed on 14 mobile and PC platforms covering most major architectures released in recent years. With SIMD, up to 5× speedup can be achieved over the entire HEVC decoder, resulting in up to 133 and 37.8 frames/s on average on a single core for Main profile 1080p and Main10 profile 2160p sequences, respectively.EC/FP7/288653/EU/Low-Power Parallel Computing on GPUs/LPGP

Escaping the complexity-bitrate-quality barriers of video encoders via deep perceptual optimization

We extend the concept of learnable video precoding (rate-aware neural-network processing prior to encoding) to deep perceptual optimization (DPO). Our framework comprises a pixel-to-pixel convolutional neural network that is trained based on the virtualization of core encoding blocks (block transform, quantization, block-based prediction) and multiple loss functions representing rate, distortion and visual quality of the virtual encoder. We evaluate our proposal with AVC/H.264 and AV1 under per-clip rate-quality optimization. The results show that DPO offers, on average, 14.2% bitrate reduction over AVC/H.264 and 12.5% bitrate reduction over AV1. Our framework is shown to improve both distortion- and perception-oriented metrics in a consistent manner, exhibiting only 3% outliers, which correspond to content with peculiar characteristics. Thus, DPO is shown to offer complexity-bitrate-quality tradeoffs that go beyond what conventional video encoders can offe

Algorithms and Hardware Co-Design of HEVC Intra Encoders

Digital video is becoming extremely important nowadays and its importance has greatly increased in the last two decades. Due to the rapid development of information and communication technologies, the demand for Ultra-High Definition (UHD) video applications is becoming stronger. However, the most prevalent video compression standard H.264/AVC released in 2003 is inefficient when it comes to UHD videos. The increasing desire for superior compression efficiency to H.264/AVC leads to the standardization of High Efficiency Video Coding (HEVC). Compared with the H.264/AVC standard, HEVC offers a double compression ratio at the same level of video quality or substantial improvement of video quality at the same video bitrate. Yet, HE-VC/H.265 possesses superior compression efficiency, its complexity is several times more than H.264/AVC, impeding its high throughput implementation. Currently, most of the researchers have focused merely on algorithm level adaptations of HEVC/H.265 standard to reduce computational intensity without considering the hardware feasibility. What’s more, the exploration of efficient hardware architecture design is not exhaustive. Only a few research works have been conducted to explore efficient hardware architectures of HEVC/H.265 standard. In this dissertation, we investigate efficient algorithm adaptations and hardware architecture design of HEVC intra encoders. We also explore the deep learning approach in mode prediction. From the algorithm point of view, we propose three efficient hardware-oriented algorithm adaptations, including mode reduction, fast coding unit (CU) cost estimation, and group-based CABAC (context-adaptive binary arithmetic coding) rate estimation. Mode reduction aims to reduce mode candidates of each prediction unit (PU) in the rate-distortion optimization (RDO) process, which is both computation-intensive and time-consuming. Fast CU cost estimation is applied to reduce the complexity in rate-distortion (RD) calculation of each CU. Group-based CABAC rate estimation is proposed to parallelize syntax elements processing to greatly improve rate estimation throughput. From the hardware design perspective, a fully parallel hardware architecture of HEVC intra encoder is developed to sustain UHD video compression at 4K@30fps. The fully parallel architecture introduces four prediction engines (PE) and each PE performs the full cycle of mode prediction, transform, quantization, inverse quantization, inverse transform, reconstruction, rate-distortion estimation independently. PU blocks with different PU sizes will be processed by the different prediction engines (PE) simultaneously. Also, an efficient hardware implementation of a group-based CABAC rate estimator is incorporated into the proposed HEVC intra encoder for accurate and high-throughput rate estimation. To take advantage of the deep learning approach, we also propose a fully connected layer based neural network (FCLNN) mode preselection scheme to reduce the number of RDO modes of luma prediction blocks. All angular prediction modes are classified into 7 prediction groups. Each group contains 3-5 prediction modes that exhibit a similar prediction angle. A rough angle detection algorithm is designed to determine the prediction direction of the current block, then a small scale FCLNN is exploited to refine the mode prediction

An energy-aware system-on-chip architecture for intra prediction in HEVC standard

High resolution 4K and 8K are becoming the more used in video applications. Those resolutions are well supported in the new HEVC standard. Thus, embedded solutions such as development of dedicated ystems-On-Chips (SOC) to accelerate video processing on one chip instead of only software solutions are commendable. This paper proposes a novel parallel and high efficient hardware accelerator for the intra prediction block. This accelerator achieves a high-speed treatment due to pipelined processing units and parallel shaped architecture. The complexity of memory access is also reduced thanks to the proposed design with less increased power consumption. The implementation was performed on the 7 Series FPGA 28 nm technology resources on Zynq-7000 and results show, that the proposed architecture takes 16520 LUTs and can reach 143.65 MHz as a maximum frequency and it is able to support the throughput of 3840×2160 sequence at 90 frames per second

Application-Specific Cache and Prefetching for HEVC CABAC Decoding

Context-based Adaptive Binary Arithmetic Coding (CABAC) is the entropy coding module in the HEVC/H.265 video coding standard. As in its predecessor, H.264/AVC, CABAC is a well-known throughput bottleneck due to its strong data dependencies. Besides other optimizations, the replacement of the context model memory by a smaller cache has been proposed for hardware decoders, resulting in an improved clock frequency. However, the effect of potential cache misses has not been properly evaluated. This work fills the gap by performing an extensive evaluation of different cache configurations. Furthermore, it demonstrates that application-specific context model prefetching can effectively reduce the miss rate and increase the overall performance. The best results are achieved with two cache lines consisting of four or eight context models. The 2 × 8 cache allows a performance improvement of 13.2 percent to 16.7 percent compared to a non-cached decoder due to a 17 percent higher clock frequency and highly effective prefetching. The proposed HEVC/H.265 CABAC decoder allows the decoding of high-quality Full HD videos in real-time using few hardware resources on a low-power FPGA.EC/H2020/645500/EU/Improving European VoD Creative Industry with High Efficiency Video Delivery/Film26

Optimizations for real-time implementation of H264/AVC video encoder on DSP processor

International audienceReal-time H.264/AVC high definition video encoding represents a challenging workload to most existing programmable processors. The new technologies of programmable processors such as Graphic Processor Unit (GPU) and multicore Digital signal Processor (DSP) offer a very promising solution to overcome these constraints. In this paper, an optimized implementation of H264/AVC video encoder on a single core among the six cores of TMS320C6472 DSP for Common Intermediate Format (CIF) (352x288) resolution is presented in order to move afterwards to a multicore implementation for standard and high definitions (SD,HD).Algorithmic optimization is applied to the intra prediction module to reduce the computational time. Furthermore, based on the DSP architectural features, various structural and hardware optimizations are adopted to minimize external memory access. The parallelism between CPU processing and data transfers is fully exploited using an Enhanced Direct Memory Access controller (EDMA). Experimental results show that the whole proposed optimizations, on a single core running at 700 MHz for CIF resolution, improve the encoding speed by up to 42.91%. They allow reaching the real-time encoding 25 f/s without inducing any Peak Signal to Noise Ratio (PSNR) degradation or bit-rate increase and make possible to achieve real time implementation for SD and HD resolutions when exploiting multicore features

An Analysis of VP8, a new video codec for the web

Video is an increasingly ubiquitous part of our lives. Fast and efficient video codecs are necessary to satisfy the increasing demand for video on the web and mobile devices. However, open standards and patent grants are paramount to the adoption of video codecs across different platforms and browsers. Google On2 released VP8 in May 2010 to compete with H.264, the current standard of video codecs, complete with source code, specification and a perpetual patent grant. As the amount of video being created every day is growing rapidly, the decision of which codec to encode this video with is paramount; if a low quality codec or a restrictively licensed codec is used, the video recorded might be of little to no use. We sought to study VP8 and its quality versus its resource consumption compared to H.264 -- the most popular current video codec -- so that reader may make an informed decision for themselves or for their organizations about whether to use H.264 or VP8, or something else entirely. We examined VP8 in detail, compared its theoretical complexity to H.264 and measured the efficiency of its current implementation. VP8 shares many facets of its design with H.264 and other Discrete Cosine Transform (DCT) based video codecs. However, VP8 is both simpler and less feature rich than H.264, which may allow for rapid hardware and software implementations. As it was designed for the Internet and newer mobile devices, it contains fewer legacy features, such as interlacing, than H.264 supports. To perform quality measurements, the open source VP8 implementation libvpx was used. This is the reference implementation. For H.264, the open source H.264 encoder x264 was used. This encoder has very high performance, and is often rated at the top of its field in efficiency. The JM reference encoder was used to establish a baseline quality for H.264. Our findings indicate that VP8 performs very well at low bitrates, at resolutions at and below CIF. VP8 may be able to successfully displace H.264 Baseline in the mobile streaming video domain. It offers higher quality at a lower bitrate for low resolution images due to its high performing entropy coder and non-contiguous macroblock segmentation. At higher resolutions, VP8 still outperforms H.264 Baseline, but H.264 High profile leads. At HD resolution (720p and above), H.264 is significantly better than VP8 due to its superior motion estimation and adaptive coding. There is little significant difference between the intra-coding performance between H.264 and VP8. VP8\u27s in-loop deblocking filter outperforms H.264\u27s version. H.264\u27s inter-coding, with full support for B frames and weighting outperforms VP8\u27s alternate reference scheme, although this may improve in the future. On average, VP8\u27s feature set is less complex than H.264\u27s equivalents, which, along with its open source implementation, may spur development in the future. These findings indicate that VP8 has strong fundamentals when compared with H.264, but that it lacks optimization and maturity. It will likely improve as engineers optimize VP8\u27s reference implementation, or when a competing implementation is developed. We recommend several areas that the VP8 developers should focus on in the future